Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Norwood
Most gate repairs in Norwood come down to one of three things: a post that heaved out of the ground over winter, a hinge that wore through, or a control board that gave up after twenty years. We fix all three, usually same day. If your gate is dragging, sagging, or refusing to open, call (877) 610-2993 and you’ll get Hal or someone from his crew on the line, not a voicemail. We know Norwood’s streets, its housing stock, and which corners flood first in March.
Why Gatewood Fence & Gate Is Norwood’s Preferred Gate Repair Company
Hal Gatewood founded Gatewood Fence & Gate in 2001, and he still answers the phone. That matters in Norwood, where a lot of the gate work we take over was originally installed by outfits that no longer exist. When a homeowner near the Town Common needs period-appropriate hinges for a Victorian iron picket gate, or a facility manager off University Avenue needs a DoorKing slide gate running again before second shift starts, they get the same person who quoted the job showing up to do it. Our Gate Repair work carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back.
Norwood customers call us because the estimate we give on the phone is the price on the invoice. No trip charge inside the county. No surprise line items. Seniors and veterans get 10% off permanently, and any repair over $200 gets $40 off. Those are standing offers, not promotions with expiration dates.
Our Gate Repair Services in Norwood
Electric Gate Repair
Most electric gates in Norwood were installed as retrofits onto gates that started life manual. The operator gets blamed for everything, but half the time the real problem is a post that shifted or a hinge that’s binding. We troubleshoot from the operator back to the steel, so we’re not replacing motors that still work fine. If your LiftMaster or FAAC operator is clicking but not moving, or reversing for no reason, we’ll trace it before we quote it.
Automatic Gate Repair
Norwood’s pre-UL 325 operators are a regular part of our week. These are the older units installed before federal entrapment-protection standards required photo-eyes and reversing edges. Some can be retrofitted safely. Some cannot, and when they can’t, we’ll tell you plainly and give you a written price for a new operator that meets current code. We won’t patch a safety hazard just to keep a bill low.
Hinge & Post Repair
This is the bread and butter of Norwood gate work. The gate sags in the hinge post, not in the middle, and that’s where we start. Posts set in shallow 1960s footings heave every March when the ground releases, and a gate that won’t latch in April was usually fine in November. We cut, reset, and brace posts to a depth that survives a Massachusetts winter, then realign the hinges so the gate swings true. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
A dragging gate scrapes concrete and destroys its own hardware. We realign the gate at the hinge points, adjust the latch, and set the operator’s travel limits so it stops binding. In Norwood’s older colonials and split-levels, we see a lot of gates that were hung on posts that were never quite plumb to begin with. Realignment is usually a one-visit job, and it’s cheaper than waiting until the hinge welds crack.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Norwood
We’re certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Norwood customers, that means we can stock or quickly source the control boards, remotes, and photo-eyes for the operators actually on your property. When a DoorKing slide gate on Nahatan Street seizes up, we’re not waiting three days for a distributor on the other side of the state. Hal has been servicing these brands since before half of them had US distribution.
Common Gate Repair Problems We See in Norwood Homes
- Frost heave on shallow post footings. Massachusetts code requires roughly 48 inches of footing depth. Post-WWII Norwood gates were often set at half that. Every spring, those posts lift, the latch misses, and the gate drags.
- Road-salt corrosion on slide gate rollers and tracks. Commercial gates along University Avenue pick up Route 1A salt all winter. Bottom rollers seize, ground tracks corrode, and the operator strains until it trips its thermal overload.
- Obsolete control boards on pre-UL 325 operators. Units installed without photo-eyes or reversing edges are a genuine entrapment risk. The board often fails before the motor. We can sometimes retrofit safety eyes onto a good chassis; other times the right answer is a new operator.
- Worn ornamental hinges on Town Common-era iron gates. The older Victorian and early-20th-century homes near the Town Common have decorative iron picket gates with hinges that aren’t made anymore. We source period-appropriate hardware and weld on site, so the gate keeps its look.
Pricing for Gate Repair in Norwood, MA
Here’s what we actually see in Norwood. A hinge and post reset on a residential swing gate runs $250-$480 depending on how much concrete the old footing gives up. Gate realignment alone is usually $165-$290. Electric operator diagnostics and minor board or limit-switch work lands around $195-$420. A full operator replacement with new safety photo-eyes starts around $750 and goes up with gate weight and arm type. Commercial slide gate roller and track replacement along University Avenue typically runs $600-$1,400 depending on track length and how much of it the salt has eaten. Every price is quoted and agreed before we start. Call (877) 610-2993 for a free estimate. If you already have a written estimate from another company, bring it to us and we’ll give you a free second opinion.
We Also Serve Cities Near Norwood
We work throughout Norwood and the surrounding towns. Our regular service area includes Westwood, Canton, Walpole, and Dedham. If your gate is on the other side of Route 1A or just over the Canton line, call the same number and we’ll put you on the route.
Serving Norwood, MA - Our Local Coverage Area
We’re based in the Norwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Norwood
Because the problem isn’t the hinges, it’s the post. Norwood’s post-WWII gates were often set in footings well short of the 48-inch frost depth Massachusetts requires. Winter freeze-thaw heaves the post upward, and no amount of hinge adjustment fixes a post that’s no longer plumb. We cut and reset the post to a proper depth, then realign the gate. Call (877) 610-2993 and we’ll tell you over the phone whether a reset is likely needed just from your description.
Sometimes. If the operator has a functioning control board with open safety inputs, we can add photo-eyes and a reversing edge and bring it closer to UL 325 compliance. If the board is obsolete or the chassis won’t accept safety sensors, retrofitting isn’t safe or cost-effective, and we’ll quote a new operator instead. We’ll show you the operator and explain before we touch anything. Estimates are free at (877) 610-2993.
Rarely. What we find on University Avenue and Nahatan Street is road-salt corrosion in the bottom rollers and ground track. Route 1A traffic tracked into the lots settles into the track, the salt eats the bearings, and the gate locks up. The motor is usually fine until it burns out trying to move a seized gate. We replace rollers and track first, then test the motor. If it’s still healthy, you just saved a motor. Call (877) 610-2993 for a site visit before it gets cold again.
Yes. We weld on site, so the gate stays in your driveway. For period iron gates near the Town Common, we match the existing hardware profile rather than bolting on a modern hinge that would stand out. We grind back the rust, weld in new material, and finish it to blend with the surrounding iron. Bring us a photo and we’ll tell you if it’s a repair or a rebuild. Call (877) 610-2993.
We start at the hinge post. A gate sags because the post has moved or the hinges have worn, not because the panel failed. We reset or brace the post, replace the hinges, and realign the gate. The panel usually stays. When the panel itself is cracked or the frame is rusted through, replacement is the honest answer, and we’ll quote you a gate that matches what’s there. Either way, the price is agreed before we start.
When you call (877) 610-2993, you’ll get a live person. Tell us what the gate is doing, or not doing, and we’ll schedule a visit to Norwood at a time that works for you. Estimates are free. No trip charge inside the county.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Norwood and surrounding Massachusetts communities since 2001.