Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Norton
A sagging or stuck gate in Norton usually comes down to two things: a hinge post that has heaved out of plumb in our clay soil, or hardware that has been on the gate since Johnson was in office and finally gave out. We fix both, usually in one visit. Gatewood Fence & Gate has repaired original chain-link swing gates, wood privacy gates, and electric operators all over Norton’s 44203 neighborhoods, and we answer the phone 24/7 at (877) 610-2993. No voicemail maze, no call center. You get Hal Gatewood or one of his crew, and we’ll be straight with you about what the gate needs and what it doesn’t.
Why Gatewood Fence & Gate Is Norton’s Preferred Gate Repair Company
Most gate companies in Summit County would rather sell you a new gate than fix the one you have. We get it, a new gate is a bigger invoice. But around Norton, where so many homes still have their original 1950s-to-1970s fence lines, replacement is often the wrong answer. The fence is still solid. The gate just needs a post reset, a new hinge, or a welded patch.
Hal Gatewood started this shop in 2001, and his name is on every invoice. He has a published address and license number you can look up. When you call, a live person picks up, day or night. When work wraps up, you get the 90-Day Done Right Promise in writing. If it’s not done right, one call brings him back. No runaround, no “up to” language. That’s the whole deal.
Our crews know Norton’s streets. We’ve worked on gates off Eastern Road, around Silver Creek, near the Barberton line, and through the older subdivisions south of Greenwich Road. We know what the clay does to a post by March. That local knowledge means we show up already knowing what to look for.
Norton customers get the same standing offers as everyone else: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Check our reviews if you want to see how that works out in practice, they’re public, and they’re from people who live around here.
Our Gate Repair Services in Norton
Electric Gate Repair
Electric gates in Norton fail for a handful of reasons: a control board that has baked through years of Ohio temperature swings, a capacitor that finally gave up, or a limit switch that drifted out of adjustment. We service FAAC, BFT, and Linear operators, along with six other major brands, and we stock common boards and capacitors so we’re not waiting on a parts truck while your gate sits open. If the board is obsolete, we’ll tell you plainly, and we’ll give you retrofit options before we ever talk about a full replacement.
Automatic Gate Repair
An automatic gate that won’t open isn’t just annoying, it’s a security problem and a fire-department access problem. We prioritize these calls in Norton. If the motor is humming but the gate won’t move, it’s often a sheared key or a stripped gear. If nothing happens at all, it’s usually the board or a dead transformer. We diagnose on site, give you the price before any work starts, and most automatic gate repairs are back to working order the same day.
Hinge & Post Repair
This is the work we do most in Norton, and it’s the work general handymen get wrong most often. A gate sags in the hinge post, not in the middle, and that is where we start. On Norton’s older streets, original galvanized posts are rusted thin at ground level, or the post itself has shifted with forty years of freeze-thaw cycles. We reset posts in concrete, weld cracked hinge brackets on site, and install sealed bearing hinges that actually swing clean. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
When a swing gate starts dragging on the clay or won’t latch, the post has usually moved, the hinges have worn into an oval, or both. We don’t just lift the gate and call it good, that’s a temporary fix that lasts one season. We bring the post back to plumb, correct the hinge geometry, and set the latch so it catches clean without slamming. On wood gates from the 1970s and 1980s, we check the hinge post for rot at ground contact before we realign anything, because a rotten post will undo the work next winter.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Norton
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. What that means in Norton is that we carry the boards, remotes, photo eyes, and limit switches for the operators actually installed around here, not just the newest models. FAAC and BFT are common on older Italian-built systems in Summit County, and Linear shows up on a lot of 1990s residential installs. If your operator is discontinued, we’ll tell you before we order anything, and we’ll give you a retrofit quote alongside the repair quote so you can make an honest call.
Common Gate Repair Problems We See in Norton Homes
- Frost-heaved hinge posts: Norton sits on heavy clay, and Summit County sees 40 to 50 freeze-thaw cycles a winter. By March, posts that were plumb in October have moved enough to make the gate drag or refuse to latch. We reset them and we do it so they stay reset.
- Obsolete 1960s chain-link hardware: The tension bands and drop-rod cane bolts on original Norton gates were not made to modern dimensions. Cranking on a new band that doesn’t fit will bind the hinge and stress the post. We either source compatible hardware or fabricate an adapter on site.
- Rotting wood hinge posts: Gates from the 1970s and 1980s wood privacy additions often rot right at ground contact. The gate sags, the fence line tears, and the fix has to start at the post, not the pickets.
- Dead operator boards on discontinued brands: If the panel is dark and the brand no longer exists, you still have options. We retrofit new boards into old boxes all the time, and we’ll tell you honestly if the retrofit is throwing good money after a bad gearbox.
Pricing for Gate Repair in Norton, OH
Nobody wants to call for a $200 problem and get a $2,000 invoice. So here are the numbers, straight up. A hinge replacement on a standard chain-link swing gate in Norton typically runs $150 to $280 including parts. A post reset in concrete, which usually requires digging out the old footing and setting a new one, runs $250 to $450 per post. Weld and rust repair starts around $120 and goes up based on how much steel needs replacing. A control board replacement on an automatic operator runs $250 to $500 depending on brand. A full motor and gearbox replacement runs $600 to $1,200. Every price is quoted and agreed before any work starts. Always. Call (877) 610-2993 and we’ll give you an exact number over the phone based on what you’re describing, then verify it on site before we touch anything. Estimates are free, and the $40-off-over-$200 offer applies to most Norton repair calls.
We Also Serve Cities Near Norton
If you’re a few minutes outside Norton, you’re still in our service area. We cover Barberton, Portage Lakes, Copley, and New Franklin, with no trip charge inside the county. If you’ve been searching for Gate Repair help nearby, or you’re specifically looking for Gate Repair in Norton, you’ve found the shop that will actually show up and stand behind the work.
Serving Norton, OH - Our Local Coverage Area
We’re based in the Norton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Norton
Clay soil plus 40 to 50 freeze-thaw cycles means your hinge post heaves a little every winter, and by spring the gate is dragging. The permanent fix is a post reset with a deeper, wider footing, not just cranking the hinge. Call (877) 610-2993 and we’ll check it while we’re out, the estimate is free.
In most cases we can repair it. The old tension bands and cane bolts aren’t made to those exact dimensions anymore, but we fabricate adapters on site and source compatible hardware so you keep the gate you have. If the post itself is rotted through, replacement becomes the honest answer and we’ll tell you that before any quote is written.
If the post is rotted more than about an inch deep at ground contact, fixing the gate without replacing the post is wasted money. We’ll tell you honestly whether the gate itself is worth saving, and give you a price for post replacement that’s almost always cheaper than a whole new gate and fence line.
Automatic gates in Summit County need functioning entrapment protection: photo eyes, reversing edges, or both, depending on the install. If yours are missing or bypassed, we’ll flag it, because a gate that closes on a child or a pet is not a gate you want to live with. We can bring the entrapment protection up to current safety standards as part of any repair.
Yes, in most cases. We retrofit new control boards into old operator boxes regularly, and we’ll give you a retrofit quote alongside a full replacement quote so you can compare honestly. If the gearbox is also worn out, we’ll say so, because putting a new board on a dying motor is just moving the problem six months down the road. Call (877) 610-2993 and describe what you’ve got, we’ll tell you what’s realistic.
Call Gatewood Fence & Gate for Gate Repair in Norton
If your gate is dragging, stuck, rusted, or just won’t open, call us at (877) 610-2993. A live person answers, even at 2 a.m. We’ll give you a straight answer, a free estimate, and a price that’s agreed before any work starts. Hal Gatewood’s name is on the shop, the shop is down the road, and the 90-Day Done Right Promise is on every invoice. That’s the whole deal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Norton since the shop opened in 2001.