Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Norton
Gate repair in Norton usually costs less than you think, and it rarely means replacing the whole gate. A stuck swing gate on a 1960s ranch, a sagging wood privacy gate behind a 1970s split-level, a slide gate that won’t track on a shared driveway off Cleveland-Massillon Road: we fix these in the driveway, weld on site, and leave your fence standing. Hal Gatewood has been doing this since 2001, and he rarely tells a Norton homeowner to rip out a gate that just needs a new hinge post, a rebuilt rail end, or a welded adapter. Call (877) 610-2993 and a live person answers, 24 hours a day.
Here’s what you need to know if you’re searching for Gate Parts & Welding in Norton: most calls are for repairs, not replacements. The surrounding fence is still sound. The gate hardware gave out. We fix the part that failed, weld what’s cracked, and stand behind the job with our 90-Day Done Right Promise in writing.
Why Gatewood Fence & Gate Is Norton’s Preferred Gate Parts & Welding Company
There are plenty of fence companies that will drive past Norton to quote you a full replacement. Hal doesn’t work that way. He lives a short drive away, his shop has a published address, and his phone rings in his pocket. When a Norton homeowner calls about a gate dragging on the concrete after a thaw, the person who shows up is the same guy whose name is on the invoice. That accounts for a lot of the repeat work we do in 44203.
We answer the phone ourselves. No voicemail tree, no call center three states away. At 11 p.m. on a Saturday when your slide gate won’t close and your dog is eyeing the open driveway, you talk to a person who knows what a rack-and-pinion slide gate is. We also know Norton’s older housing stock well enough to know what we’ll find before we pull into the driveway: original galvanized chain-link with discontinued tension bands, wood privacy gates with rotted hinge posts, and post footings that Summit County frost heave has been working on since the Eisenhower administration.
Every technician who shows up is background-checked and uniformed. We service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. And the 90-Day Done Right Promise is stamped on every job, not hidden in a PDF. If it’s not right, Hal comes back and makes it right. No runaround.
Our Gate Parts & Welding Services in Norton
These are the jobs we do most often on Norton’s ranch and split-level lots:
Hinge Replacement
Norton’s original chain-link swing gates from the 1960s and 1970s sit on hinges that were never meant to last 60 years. They seize, they snap, they pull out of the post when the gate sags. We cut out the failed hinge, weld a new one to schedule-40 steel, and set it so the gate swings true. If the hinge post itself is gone, that’s post replacement, and we do both on the same visit.
Post Replacement
A gate sags in the post, not the middle. You can straighten the panel all day, but if the post is rotted at the soil line or frost-heaved half an inch, the gate will bind again by April. We dig out the failed post, weld the new one to the existing rail ends, and set it deeper than the original so it survives Norton’s freeze-thaw cycles. On older lots with tight side yards and gas lines close to the gate, we hand-dig and we don’t hit your service lines.
Rail Repair
Chain-link top rails and bottom rails rust from the inside in Summit County’s wet springs. When a rail snaps at a fitting, the whole gate frame twists. We weld the rail solid, replace the fitting if it’s cracked, and bring the gate back into square. Most rail repairs on a single-swing gate take under an hour once we’re on site.
Custom Welding
This is where Norton’s older gates come back to life. The original 1960s-era tension bands and drop-rod cane bolts on many Norton chain-link gates aren’t manufactured to the same dimensions anymore. Big-box hardware doesn’t carry them, and forcing a new stamping onto old pipe usually fails in a season. We fabricate steel adapters on-site so the old hardware keeps working. We also build custom slide-gate frames, weld steel fittings onto wood posts, and rebuild gate corners that have separated after decades of slamming.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Norton
We service and stock parts for the gate operators Norton homeowners actually have: FAAC, BFT, Linear, and Viking among them. If you’ve got a rack-and-pinion slide gate with a BFT motor that’s grinding, or a FAAC arm on a 1980s wood gate that’s lost its limit settings, we carry or can get the component fast. We also keep a good stock of common steel fittings, heavy-duty hinges, and rail hardware for the older systems that no longer have manufacturer support.
Common Gate Parts & Welding Problems We See in Norton Homes
Norton’s climate and housing age produce a consistent set of gate failures. Here’s what we see most during the year in 44203:
- Frost-heaved hinge posts in March and April. Norton sits on clay-heavy Summit County soil, and we get 40 to 50 freeze-thaw cycles a winter. Clay holds water, water freezes, soil expands, and 1960s swing-gate posts get pushed out of plumb. The gate binds on the latch, the hinges stress out, and the tension bands start to tear.
- Discontinued 1960s chain-link hardware with no modern match. The tension bands and cane bolts on many original Norton chain-link gates are no longer made in the same size. Homeowners spend weekends at retail stores trying to adapt new parts to old pipe. We fabricate adapters on-site instead.
- Shared driveways where a swing gate won’t fit. On Norton’s tighter residential lots, many driveways are shared or run right against a neighbor’s property line. A swing gate would block access. We weld slide-gate frames and rails in place piece by piece so vehicle and pedestrian access keeps working through the repair.
- Wood privacy gates rotted at the hinge post. The 1970s and 1980s wood privacy gates we see in Norton have spent decades in ground contact. The hinge post rots, the gate drops, and the hinges tear out of the wood. We weld a steel hinge plate to a new post, anchor it in concrete, and rehang the existing panel. The neighbor’s matching fence stays up.
Pricing for Gate Parts & Welding in Norton, OH
Here are honest ranges for Norton, based on the jobs we’ve done across 44203:
- Hinge replacement on a chain-link swing gate: $120-$280 depending on whether one or both hinges are gone.
- Post replacement (steel post, dug and set in concrete): $300-$550 for a single hinge post on a standard residential gate.
- Rail repair or weld at a rail fitting: $90-$220 including grinding and recoating.
- Custom welding (adapter fabrication, frame repair, corner rebuild): $150-$450 depending on the piece and the time in the weld.
Two things affect price more than anything in Norton: how deep the old post is set, and whether the gate operator has to be disconnected and re-homed so the gate keeps opening during the job. Every price is quoted and agreed before we touch the gate. Free estimates. Seniors and veterans get a permanent 10% discount on every invoice. And if you’ve got a written estimate from another company, bring it to us for a free second opinion. Call (877) 610-2993, and we’ll come out to Norton and look at the gate in person.
We Also Serve Cities Near Norton
Most weeks we’re running calls through Norton and the towns around it: Barberton to the southeast, Portage Lakes to the south, Copley to the north, and New Franklin to the west. Dispatch and scheduling are coordinated from our Cleveland office, but the crews who work on your gate are local to this part of Summit County. If you’re two minutes over the line from Norton, you still get the same 90-Day Done Right Promise.
Serving Norton, OH - Our Local Coverage Area
We’re based in the Norton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Norton
Yes, we repair the original hardware. Most Norton chain-link swing gates from the 1960s can be saved with a new hinge post, a rebuilt rail fitting, or a welded adapter that lets the old cane bolt keep engaging. We don’t replace gates that don’t need replacing. Call (877) 610-2993 and Hal will tell you over the phone what’s likely going on, then confirm it in person.
In most cases the hinge post has been pushed out of plumb by frost heave. We cut out the old footing, weld a new schedule-40 post to the existing rails, and set it in a deeper concrete base so the next winter doesn’t move it. The gate usually swings free immediately after. Call us as soon as you notice the gate dragging; the longer it binds, the more strain it puts on the hinges and latch.
Yes. On shared or tight Norton driveways, a slide gate is often the only workable option. We weld the frame and track in place so the gate slides rather than swings, and your neighbor’s vehicle and pedestrian access keeps working the whole time. We’ll measure it for free and give you a written price before any work starts.
Yes. We weld a steel hinge plate onto a new post, set it in concrete, and rehang your existing wood gate panel. If the wood at the hinge point is rotted, we can splice in a treated section and reinforce it with steel so the gate holds. You keep your fence, we fix the post.
If the gate is dragging but still opens, leave it closed and use the pedestrian gate or walk around. If it’s bound shut and trash pickup is coming, call us and we’ll prioritize it; same-day emergency service is available for Norton, and we’ll get the gate open so your service isn’t interrupted. If it’s a slide gate with a failed operator, disconnect the motor and Mannheim the gate open manually. Call (877) 610-2993; we’ll tell you exactly what to do before we arrive.
Keeping Your Norton Gate Working Through Summit County Winters
Norton’s freezing and thawing cycles are harder on gate posts than most people realize. Clay soil swells when it freezes, contracts when it thaws, and after 60 years of that cycle, a galvanized post set in 1963 has moved. A quarter inch at the footing is a full inch at the latch. That’s why we see so many original chain-link swing gates on Norton’s post-war ranches binding every March: the post isn’t straight, the hinges are loaded sideways, and the gate fights itself every opening.
We don’t fight it back. We cut out the post, go deeper, set it true, and weld the gate back square. Then we build the little adapters that keep the old hardware working: tension bands, cane bolts, hinge pins. That’s the part of this trade that separates a welder who knows Norton from a handyman with a truck. The surrounding fence is still good. The gate is the only thing broken. So we fix the gate. That’s Gate Parts & Welding done right in Norton.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Norton since 2001.
Need a gate fixed or welded in Norton? Call (877) 610-2993 now. A live person answers, the estimate is free, and the price is agreed before any work starts.