Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Northglenn, CO: Straight Answers on Cost, Service, and Who Actually Shows Up
Gate repair in Northglenn typically costs between $165 and $480 depending on whether you’re dealing with a sagging hinge post, a dead opener control board, or a rusted-through post that needs resetting. Hal Gatewood has been fixing gates since 2001, and our crew handles everything from realigning 1960s alley gates to retrofitting safety sensors on legacy openers. Call (877) 610-2993 and a live person answers, day or night.
Northglenn’s original master-planned neighborhoods mean something specific for gate work: dozens of rear alley gates on a single block, all installed around the same time, all failing the same way. We know what that looks like before we get out of the truck. The clay soil along those alley lines heaves every winter, and by March the latches bind. We fix the post first, not just the panel. That’s the difference between a repair that lasts and one you’re calling about again next spring.
Key Takeaways:
- Most Northglenn gate repairs run $165-$480, with post resets and realignments at the higher end
- Rear alley gates from the 1960s-1970s dominate our call volume in 80241
- We weld on site, we don’t haul your gate to a shop
- The 90-Day Done Right Promise is in writing on every invoice
- Live phone answer, 24/7, no voicemail maze
Why Gatewood Fence & Gate Is the Name Northglenn Homeowners Call First
Hal Gatewood put his name on the shop in 2001 and never took it off. That matters in a city like Northglenn, where neighbors still talk over the back fence about who did right by them. We’re not a call center, and there’s no “the estimate might change at the door.” The price we quote is the price on the invoice, agreed before any work starts. Every repair over $200 takes $40 off if you mention it when you call. Seniors and veterans get a permanent 10% discount, no expiration date.
Our crew knows the 80241 ZIP because we work it constantly. The alley grids off Leroy Drive, the ranch-style lots near Malley Drive, the split-levels clustered around Community Center Park. When someone in Northglenn calls about a gate that jams shut after a freeze, we already know what the post looks like under the soil line before we dig. That local familiarity means faster diagnosis, fewer return trips, and a repair that accounts for what the clay is going to do next winter.
We publish our address. Our license number is there for anyone to look up. If something isn’t right after we leave, one call brings us back under the 90-Day Done Right Promise. Hal hand-writes that promise on the invoice. It’s not in fine print because it’s not a marketing line. It’s how he’s kept the same customers for 24 years.
Our Gate Repair Services in Northglenn
Hinge & Post Repair
The post is where most Northglenn gate problems start, and that’s where we start the fix. Adams County clay expands and contracts with every freeze-thaw cycle, and posts set in that soil heave out of vertical. A gate that sags in the middle looks like a panel problem, but the panel is hanging on a post that moved. We pull the post, dig deeper into stable clay, reset it with gravel and concrete, and rehang the gate with new strap hinges. We weld repairs on site in your alley, so there’s no hauling anything across town.
Gate Realignment
After two or three Northglenn winters, a double gate that once met perfectly in the center will start to cross over or leave a gap at the latch. The frame is out of square because the hinge posts have shifted independently. Realignment is more than tightening bolts. We check post vertical with a level, adjust the frame geometry, and set the latch so it engages without slamming or sticking. Given the clay heave pattern in this city, we usually recommend gravel drainage at the post base as part of the reset to slow the next cycle.
Electric Gate Repair
A lot of the electric gates in Northglenn were installed between the late 1990s and early 2000s, and their control boards are aging out. When we open a legacy box with a burnt relay or a dead transformer, we can often source the board or rebuild the wiring without replacing the entire operator. That’s a repair-first approach, and it saves homeowners hundreds over what a “replace everything” quote would look like. We service FAAC, BFT, Linear, and Viking operators. If you’re not sure what brand is in the box, we’ll figure it out in under five minutes once we’re at the gate.
Automatic Gate Repair
If your automatic gate opens fine but reverses halfway through closing, and you’ve got a keypad and loop detector wired in, there’s a good chance the close-force setting isn’t compensating for Gate Open Cycle lag, or a photo eye is misaligned or dead. On older gates around Northglenn, we also see obstruction sensor failures from years of Colorado sun baking the housing. The tell is when the gate reverses with no obstruction and loses its close-limit memory. We diagnose on site, replace the sensor or recalibrate the board, and test the entrapment reversal before we leave. Safety is not optional on this work. If a gate closes on a child or pet, the operator is doing exactly what a faulty sensor is telling it to do.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Northglenn
We carry parts for the operators already installed across Northglenn’s 1960s-era homes, including FAAC and BFT hydraulic units, Linear swing gate operators, and Viking control boards. Because we stock common boards, remotes, and safety sensors locally, we can often complete a repair the same day we diagnose it. When a board is obsolete and can’t be sourced reliably, we’ll tell you straight: retrofitting a modern control system on the existing gate frame often costs less than a full replacement and gives you modern UL 325 safety compliance. Hal would rather retrofit than replace, when retrofit is the smarter investment. And when it isn’t, he’ll tell you that too.
Common Gate Repair Problems We See in Northglenn Homes
- Sagging rear alley swing gates from the 1960s and 1970s. The original metal posts rust through at ground level, and the panel starts dragging or crossing at the latch. Tightening the hinges won’t fix a post that’s disintegrating below the soil line.
- Clay heave pushing hinge posts out of vertical every winter. Northglenn’s freeze-thaw cycle is aggressive, and posts set without deep footings move enough to bind the latch side come spring. This is the most common call we get from March through May.
- Legacy gate operators installed before UL 325 safety mandates. Many of these units lack operational photocells or edge sensors, and homeowners only discover the gap after an entrapment scare or when a vendor quotes a retrofit. We can install modern safety sensors on most older operators without replacing the whole system.
- Wooden gate frames that have absorbed decades of Colorado sun and snow. Warping at the hinge rail throws off the swing arc, putting extra stress on hinges and latches. We can often keep the original wood and rebuild the hinge rail with new stainless hardware.
Pricing for Gate Repair in Northglenn, CO
Here’s what we see on most Northglenn jobs. Hinge replacement and gate realignment typically run $165 to $260. Post-reset work, which includes pulling the post, digging deeper, new concrete, and rehanging, usually lands between $340 and $480. Electric gate repair varies by the board and components: a sensor replacement is often $120 to $190, while control board rebuilds or replacements can range from $225 to $550 depending on brand and availability. Weld and rust repair runs $90 to $220 per section. There’s no trip charge anywhere in Adams County, and the price is locked before we touch a bolt. That means if we quote $280 to reset a hinge post, the invoice says $280. Call (877) 610-2993 and we’ll give you an honest number on the phone, or come out for a free written estimate.
We Also Serve Cities Near Northglenn
Our gate repair crews work throughout the north metro, including Thornton, Federal Heights, Sherrelwood, and Welby. If you’re just outside Northglenn and dealing with the same clay-heave post problems we see along the 80241 alley grid, give us a call. Local coverage, live answers, and the same 90-Day Done Right Promise. This is our Gate Repair team’s territory, and Gate Repair in Northglenn is a core part of it.
Serving Northglenn, CO - Our Local Coverage Area
We’re based in the Northglenn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Northglenn
Because the problem is not the hinges. It’s the post moving in Adams County clay. When the soil freezes, it swells and pushes the post up. When it thaws, the post settles unevenly and leans. Tightening a hinge on a post that’s drifted out of vertical just makes the gate bind harder at the latch. The fix is a post reset with deeper footings and proper drainage. Call (877) 610-2993 for an exact quote. Estimates are free and there’s no trip charge in the county.
In most cases, yes. A legacy operator with a functioning motor and intact wiring can often accept retrofit photocells and edge sensors. What we can’t do is promise the board will support every modern safety input. When we open the box and see what’s there, we’ll tell you honestly whether a retrofit makes sense or whether a modern control board is the cheaper long-term fix. Call (877) 610-2993 and we’ll come out, look at what you have, and write up a price before any work starts.
No. A leaning post is a structural failure in progress, not a cosmetic issue. The post is losing its footing in expanding clay, and the gate’s entire weight is now working on a fulcrum that’s getting weaker every freeze-thaw cycle. Left alone, the post eventually fails at ground level and the gate drops or swings into a car or person. The repair is often straightforward: pull, dig deeper, reset, rehang. Call (877) 610-2993 and we’ll give you a written price on the spot.
That reversal pattern is classic obstruction sensor or close-force calibration failure. The gate thinks it has hit something and is reversing as designed. It could be a dead photo eye, a sun-damaged sensor housing, or the close-force setting on the board has drifted. Given Northglenn’s UV exposure, we see sensor housing failure regularly on gates of all ages. We test the sensors, check the board settings, and repair or replace only what’s actually failing. Call (877) 610-2993 to schedule a visit.
Depends on the condition of the frame and posts. If the hinge rail has warped but the rest of the wood is sound, we can rebuild the rail, add stainless hardware, and rehang it. If the posts are rusted through, those get replaced regardless. The gate panels from the 1970s are often made of wood you can’t get anymore, and many are still structurally sound. Replacement is only the right call when the cost to rebuild exceeds the cost of a new gate with modern hardware, and we’ll show you the numbers both ways before you decide. Call (877) 610-2993 for a free written estimate.
Northglenn’s Alley Grid: Why Your Gate Fails the Way It Does
Northglenn’s original neighborhoods were built as a master-planned community starting around 1959, and the uniform housing stock means a technician working a single block can find three or four rear wooden gates all installed in the same decade, all showing the same clay-heave post lean, and all needing the same post-reset and rehang. You can see it from the alley: every gate leaning toward the fence line, every latch slightly crooked. The soil under those posts is the same Adams County clay, and the freeze-thaw cycle treats it the same way. We know the pattern because we see it repeated alley after alley, year after year.
We worked a rear alley off Leroy Drive in the 80241 ZIP where three ranch-style homes from the early 1960s had matching wood swing gates, and every hinge post had heaved on the same side after the last freeze-thaw cycle. Our tech pulled the posts, dug deeper post footings into stable clay, reset them with gravel and concrete, then rehung the gates with new strap hinges and adjusted the sag correction. All three latches line up now, and the whole alley opens and closes without binding. That’s the work that matters in Northglenn: not swapping a panel, but fixing the post underneath so the gate stops fighting the soil.
There’s another layer to this. Many of those gates still carry the original operators installed in the 1990s and 2000s, and those boards are now decades old. The solder joints crack, the capacitors dry out, and the relays stick. When a homeowner calls us because the gate won’t respond to the remote, the box often still has a date sticker from the year of installation. We can rebuild some of those boards, source replacements for others, and install modern safety sensors on nearly all of them. The result is a gate that works reliably and meets modern entrapment standards without the homeowner paying for an entire new operator.
One more thing about Northglenn specifically: the Chinook winds. When those warm gusts come off the Front Range, they hit an already-misaligned gate frame with lateral force it wasn’t built for. A gate that’s slightly out of square will slam against the latch or swing past its stop, shearing hinge screws and bending hardware. We see that damage pattern after every wind event. The real fix is the same: square the frame, reset the posts, and let the gate handle the next windstorm from a stable footing.
Call Gatewood for Gate Repair in Northglenn, CO
If your gate is sagging, binding, reversing on its own, or just not responding to the remote, call (877) 610-2993. Hal answers the phone, or you’ll get someone from his crew who’s worked these Northglenn alleys for years. We’ll give you a straight answer on what it will cost, and the price we quote is the price you pay, agreed before the wrench comes out. You get the 90-Day Done Right Promise in writing, and there’s no trip charge anywhere in Adams County. Let us come look at your gate before another Northglenn winter works on those posts.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Northglenn since 2001.