Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Northglenn
Gate parts and welding in Northglenn usually means one of two things: a rear alley gate that has dropped out of square after another freeze-thaw cycle, or a hinge post that has heaved in the clay and pulled the frame apart. We handle both, on site, without hauling your gate away. Most repair calls in the 80241 zip code get a same-day or next-day visit, and a live person answers the phone at (877) 610-2993 around the clock. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and when the job calls for welding, it happens in your driveway, not in some shop across town.
Northglenn has a specific gate problem you won’t find in Thornton or Westminster. We know the soil, the alley grid, and the way a 1965-era post reacts to a wet March. That local knowledge is the difference between a repair that lasts two seasons and one that lasts a decade.
Why Gatewood Fence & Gate Is Northglenn’s Preferred Gate Parts & Welding Company
We’re locally owned and owner-operated, and Hal’s name is on the shop and on every invoice. That matters in a place like Northglenn, where homeowners can drive ten minutes and look us in the eye if something isn’t right. We’ve built a strong local reputation in Northglenn by fixing what other companies want to replace. A sagging gate does not always need a new one. Often it needs a hinge post reset, a welded rail bracket, and two new hinges, and it’s square again for years.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we come back and make it right. No phone tag, no “up to” language, no fine print. That guarantee gets stamped on every invoice. Northglenn homeowners appreciate that, because most of them have been burned by an outfit that quoted one number on the phone and charged another at the door. Our price is agreed before any work starts, always.
Calls are answered by a live person 24/7, not a voicemail or a call center. The person who shows up is background-checked and uniformed, and he knows Northglenn’s alleys because he has worked them for years. We’re certified to service nine major gate brands, and we keep common parts stocked for the calls we know are coming: heavy hinges, steel rail stock, latch hardware, and gusset plates for post repairs.
You can visit our Gate Parts & Welding page for the full scope of what we do, or keep reading for the Northglenn-specific picture. Serving Northglenn means knowing that the original 1960s rear alley grid was built all at once, which has consequences for every gate on those alleys.
Our Gate Parts & Welding Services in Northglenn
Hinge Replacement
Hinge replacement in Northglenn is almost never a bolt-off, bolt-on job. The older ranch-style and split-level homes built between 1960 and 1975 have rear gates whose hinge posts have been through fifty or sixty winters of Adams County clay. Posts heave, gates bind, hinges shear. We replace the hinge and we check the post at the same time, because putting a new hinge on a leaning post just moves the failure point six inches down the rail. Most hinge replacements run $85 to $175 per hinge, depending on whether the post needs to come back into plumb first.
Post Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. In Northglenn, post replacement is the single most common repair we perform on rear alley gates. The original posts were often set shallow in clay that expands and contracts every winter. We dig them out, set new steel posts in proper concrete footings below the frost line, and rehang the gate so it swings square. A post replacement with rehang in Northglenn typically runs $280 to $420 for a single rear gate post, including the new concrete and hardware. Show me a gate closing on its own, and I’ll show you where it’s failing, and nine times out of ten it’s the post.
Rail Repair
Wooden rails rot at the hinge post, chain-link rails snap at the weld, and steel rails crack at the corner bracket. Welding the old rail is a temporary patch while the post footing repair is the real fix. We’ll tell you that straight. If the rail has rusted through or rotted, we replace the rail and weld new brackets in place. Rail repair with welding in Northglenn typically runs $120 to $260 depending on the length and whether we’re working with wood, chain-link, or steel. We do the welding on site, so the gate never leaves your alley.
Custom Welding
Some repairs don’t have a part number. A custom steel frame for a wide alley gate, reinforcement plates for a rusted hinge post, a rack extension for a LiftMaster arm on a long driveway, a bracket that has to fit a post installed in 1964, back when dimensions were whatever the original builder had on hand. We weld it on site. Custom welding in Northglenn typically runs $90 to $150 per hour plus materials, and we’ll quote the job before we strike an arc. We build to the gate you have, not to a catalog.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Northglenn
We’re certified to service nine major gate brands, and for Northglenn customers the two we work on most these days are Linear and LiftMaster, with Ghost Controls showing up steadily on solar setups for acreage entrances near the city. We stock common parts for these operators locally, so a swing arm, control board, or gear kit doesn’t mean waiting a week on a freight truck. If your opener is a Viking or DoorKing, we service those too, and we know the failure points on every one of them. We’ll tell you honestly whether your operator is worth repairing or whether you’re throwing money at a motor that is already dead.
Common Gate Parts & Welding Problems We See in Northglenn Homes
- Frost-heaved hinge posts. Adams County clay soaks up water, freezes, and lifts any post set shallow. One winter raises the post an inch. The gate binds, the latch stops lining up, and the panel drags on the ground. Fixing the hinge without fixing the post means fixing it again next spring.
- Rail rot at the hinge post on 1960s rear gates. Original wooden gates in older neighborhoods near the alley lines have been soaking up irrigation water and snowmelt for six decades. The rail near the post is the first part to go. New hinges on rotted wood do not hold, so we weld steel reinforcement or replace the rail entirely.
- Frozen or binding latches in the deep winter. Front Range freeze-thaw cycles fill latch mechanisms with ice, then clay, then rust. A latch that will not close is not just annoying, it means your rear yard is open to the alley. We replace and reinforce the latch with weather-sealed hardware built for Colorado winters.
- Operator strain from misaligned frames. Automatic openers on rear alley gates drag dead weight when the frame is out of square. The motor pulls harder, the circuit board burns hotter, and the operator dies two years early. We square the gate before we touch the operator, because fixing the panel without the post is fixing it twice.
Pricing for Gate Parts & Welding in Northglenn, CO
A typical hinge replacement in Northglenn runs $85 to $175 per hinge. Post replacement with rehang typically runs $280 to $420 per post. Rail repair with welding runs $120 to $260. Custom welding runs $90 to $150 per hour plus materials. Full gate operator installs on a Northglenn alley gate usually land between $900 and $1,800, depending on whether you need solar, a new arm, or additional safety edges. Every price gets quoted and agreed before any work starts. We do not surprise you at the door. Free estimates are standard, and we offer a free second opinion on any written estimate from another company. There is no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Northglenn
We work throughout the northern metro, including Thornton, Federal Heights, Sherrelwood, and Welby. If your gate is in one of those spots, the same 90-Day Done Right Promise and live-answer phone apply. Northglenn remains our core alley grid, and the patterns here appear in those neighboring towns, though newer Thornton subdivisions on engineered fill tend to have fewer post heaving problems than Northglenn’s original clay.
Serving Northglenn, CO - Our Local Coverage Area
We’re based in the Northglenn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Northglenn
Northglenn’s original 1960s alley grid was built on native Adams County clay that swells and heaves with every freeze-thaw cycle, while newer subdivisions in Thornton and Westminster sit on engineered fill that drains better and moves less. A post set shallow in that clay will lift an inch or more in a single winter. We fix this by setting posts below the frost line in proper concrete, then rehanging the gate so it opens square. Call (877) 610-2993 and Hal will look at your post. Estimates are free.
Yes, but only if the post is addressed first. We weld a steel frame onto the existing chain-link panel to stop the panel itself from racking, but if the post is still heaving, the weld will just transfer the stress. The real fix is post realignment plus the welded frame. In Northglenn we routinely do both in the same visit. Exact pricing depends on your gate and post, and we quote it before work begins at (877) 610-2993.
Solar-powered operators are the only real option in those spots, and Ghost Controls and Linear make the two we recommend most for acreage entrances near Northglenn. The key is sizing the panel to survive shaded winter months and pairing the operator with a properly welded hinge post. A solar operator on a leaning post will stall or reverse mid-cycle, and no brand fixes that. We’ll come measure, check solar exposure, and give you a written price. Call (877) 610-2993 for a free on-site assessment.
For residential rear alley gates in Northglenn, a keypad and one safety photocell pair is usually sufficient, and loop detectors are generally overkill unless you are seeing regular truck traffic through the opening. Commercial or multi-home alley entrances are a different story. We’ll tell you straight what your gate actually needs and quote it before any work is scheduled.
Welding only applies to the hardware and steel brackets, not the wood itself, but steel brackets welded to the post and bolted through the wooden rail are exactly how we stop the drag. The wood rail usually gets replaced with treated stock, then we weld a steel reinforcement plate at the hinge post connection and reset the post if it has heaved. Most of these jobs in Northglenn run $250 to $450 including the post work. Call (877) 610-2993 and we’ll come look at the gate before it drags a furrow into your alley.
Call Gatewood Fence & Gate for Gate Parts & Welding in Northglenn
If your rear alley gate is sagging, binding, or dragging, call (877) 610-2993 now. A live person answers, day or night. We’ll schedule a visit, quote the job in writing before any work starts, and stand behind it with the 90-Day Done Right Promise. Hal Gatewood’s name is on the shop and on every invoice, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Northglenn since 2001.