Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across North Bend
Gate repair in North Bend usually falls into two camps: the gate won’t open, or the gate won’t stay where it’s supposed to. A typical hinge or post repair on a North Bend property runs $220-$480, while operator or motor work on a long driveway gate usually lands between $320 and $720 depending on whether we’re fixing what’s there or swapping in something heavier. We service the whole 98045 area, from the valley floor neighborhoods up to the benchlands. If your gate is down, call (877) 610-2993 and a live person answers, any hour.
Why Gatewood Fence & Gate Is North Bend’s Preferred Gate Repair Company
Hal Gatewood has been running Gatewood Fence & Gate since 2001, and he’s the person whose name is on the shop and on every invoice. North Bend customers don’t get a faceless franchise tech in a wrapped van. They get Hal or one of his background-checked crew members, someone who knows that a gate on 428th Ave SE behaves differently than one up on Cedar Falls Road, because the water table and the soil and the winter conditions are completely different. Our Gate Repair team has handled everything from squeaky hinges on a Tollgate subdivision driveway gate to full operator replacements on horse properties overlooking Meadowbrook Farm.
Every call to (877) 610-2993 is answered by a live person, 24 hours a day, seven days a week. Not a voicemail, not a menu tree, not a call center three states away. When a North Bend homeowner calls at 6 a.m. because their gate won’t open and they can’t get the horse trailer out, the phone rings and somebody picks up. That’s been the standard since day one, and it isn’t changing. And every job we do carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no arguing about what “done right” means.
Our Gate Repair Services in North Bend
Electric Gate Repair
North Bend has a lot of long driveways, and most of them terminate in an electric gate operator. When an operator fails, it’s usually one of three things: the board got cooked by a power surge from a winter storm off Snoqualmie Pass, the limit switches drifted so the gate over-travels, or the capacitor gave out after years of cold morning starts. We diagnose on site and we repair before we recommend replacement. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we carry boards, capacitors, and remotes for most of them on the truck. A typical electric gate repair in North Bend runs $320-$720, and you’ll know the exact number before we touch anything. Quoted and agreed up front. Always.
Automatic Gate Repair
An automatic gate is just a gate with two extra systems bolted to it: the operator that moves it and the safety devices that keep it from moving when something is in the way. When either one acts up, the gate becomes stupid or dangerous. Around North Bend, we see a lot of automatic gates that were installed for a standard suburban lot and then asked to swing a 16-foot tubular steel farm gate that weighs three times what the operator was rated for. That’s not a repair call, that’s a math problem, and we’ll tell you straight if your operator is undersized for what you’re actually asking it to do. Then we’ll install one that fits the gate, not one that fits the budget of whoever built it the first time.
Hinge & Post Repair
Here’s the thing about a sagging gate: it almost never sags in the middle. It sags because the hinge post has moved or the hinge hardware has wallowed out. Fix the panel without the post and you’ll fix it twice. On North Bend’s valley floor, hinge posts set in Snoqualmie River bottomland shift when the ground resaturates after flood season. The soil turns to soup, the post leans a few degrees, and suddenly the latch doesn’t line up and the gate drags on the ground. We dig out, reset with properly compacted gravel and, where the soil is chronically unstable, helical anchors that go down past the saturated layer. A hinge and post repair in North Bend typically runs $220-$480 depending on depth and post size.
Gate Realignment
Most gate realignment calls in North Bend start with the same sentence: “The gate used to close fine, and now it doesn’t.” That’s post movement, hinge wear, or both. We don’t just shim the latch plate and call it good. We get the posts plumb, the hinges shimmed or replaced, and the gate hung so it swings level and latches with one hand. On a floodplain property near the river, we’ll often recommend spacers or adjustable hinges so future minor settlement can be corrected in ten minutes instead of a full reset. That’s the difference between fixing the symptom and fixing what actually moves.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Bend
We’re certified to service nine major gate brands, and for North Bend customers the workhorses tend to be three: Linear for residential operators, FAAC for heavy hydraulic and solar-capable farm operators, and Ghost Controls or DoorKing for solar setups on long driveways off the power grid. We stock common boards, remotes, photo-eyes, and capacitors on the truck, which means most North Bend service calls get resolved in one visit. If we don’t have the exact part on hand, we source it fast and don’t leave your gate hanging open while we wait. Dispatch and scheduling are coordinated from the brand’s Seattle office; the person who shows up at your place is a local crew member who knows North Bend’s roads and weather.
Common Gate Repair Problems We See in North Bend Homes
- Post leaning after floodplain saturation. When the Snoqualmie River overflows, or even when a wet autumn keeps the water table high for weeks, silty bottomland soil loses bearing strength. Posts that were set in a shallow concrete collar start to lean, and the gate binds or won’t latch. Blocking out a foot of saturated soil and setting a new anchorage that reaches stable ground is the only fix that lasts.
- Heavy farm gates wearing out light residential hinges. North Bend’s older valley properties and horse parcels often have 14-to-18-foot steel tube gates hung on hinges rated for something half that size. The barrel wears, the pin develops play, and the gate drops a half inch a year until it drags. We replace with weight-rated hinges and often add an anti-wear bushing so you’re not back on the phone in two seasons.
- Solar operator batteries dying under persistent valley cloud cover. North Bend gets more lowland rain and cloud than cities 15 miles west, and a solar panel sized for eastern King County sun often can’t keep up here. The operator starts cycling slower, then stops mid-travel. We size larger panels and deeper battery banks for valley reality, not for ideal conditions.
- Weld cracks at the hinge mount on tubular steel gates. Heavy wet snow from Cascade storm cycles loads gate frames in ways suburban gates never see. The weld where the hinge ear meets the top rail is where it fractures. We weld on site, in your driveway, with the gate lashed in place, and we don’t tell you to buy a new gate when the old one is fixable.
Pricing for Gate Repair in North Bend, WA
Straight numbers, North Bend market. Hinge and post repair runs $220-$480. Gate realignment runs $180-$350. Electric operator repair runs $320-$720. Weld and rust repair runs $150-$400 depending on how much prep the rust dictates. Full operator replacement on a heavy farm gate, including new arms, mounts, and safety photo-eyes, usually lands between $900 and $2,400 depending on swing weight, solar vs. mains, and whether we’re adding access features. Every price is quoted and agreed before any work starts. There’s no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and you’ll get an exact number in writing. Free estimate, no obligation, nobody leaning on you to say yes.
We Also Serve Cities Near North Bend
Our crews work regularly in Snoqualmie, Hobart, Issaquah, and Klahanie, so if you’re just over the city line, the same Gate Repair in North Bend crew can reach you quickly. The floodplain soil issues we fix in North Bend show up differently in the higher-elevation neighbors, but the standard of work and the 90-Day Done Right Promise follow us everywhere.
Serving North Bend, WA - Our Local Coverage Area
We’re based in the North Bend area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in North Bend
Yes, permanently fixed, but only if the post is anchored below the saturation zone. North Bend’s valley floor sits in the Snoqualmie River floodplain, and when autumn and winter floods recur, silty bottomland soil resaturates and loses most of its lateral bearing strength. A post set in a shallow concrete collar shifts, the gate drops, and nothing lines up. The fix is either a deeper pier that reaches stable subsoil or oversized helical anchors driven past the saturated layer. On one horse property just off 428th Ave SE facing Meadowbrook Farm, our crew reset a leaning 16-foot tubular steel swing gate after spring floods undermined its post footing; we used a FAAC 770 operator and oversized helical anchors, then installed an in-ground loop detector so the gate opens only for vehicles and not livestock. That post hasn’t moved since. Call (877) 610-2993 and we’ll tell you what your soil actually needs.
For solar on a North Bend farm gate, we lean toward the FAAC 770 or a Linear unit paired with an oversized panel and a battery bank sized for valley cloud cover, not ideal sun. North Bend’s lowland rainfall and persistent winter cloud mean a panel that works in Issaquah will undercharge the same battery here by 30 to 40 percent over a wet season. We calculate panel wattage and amp-hour capacity based on your gate’s swing weight and how many cycles per day it actually sees, then add margin for the grayest stretch of November through February. If you’re running a livestock entry that cycles two dozen times a day, the math matters more than the brand sticker. We’ll spec it right and quote the full setup before any work starts.
In-ground loop detectors are the most reliable answer we install around North Bend, where deer and loose dogs are daily facts of life. A loop detector buried in the driveway reads the metal mass of a vehicle and ignores deer, dogs, and most wildlife. Photo-eye sensors alone will trigger for anything that breaks the beam, including a deer wandering through. For gates that need to let horses through on foot but not vehicles, we can tune the detector’s sensitivity and position. We installed this exact setup on that 428th Ave SE horse property to keep the livestock in and the deer out, and it’s been working without the homeowner touching a remote. Call (877) 610-2993 for a free estimate on a loop detector retrofit.
The weld where the hinge ear meets the top rail is where heavy steel tube gates fail around here. North Bend’s wet snow cycles and the sheer weight of a 16-foot farm gate put constant flex at that junction, and the weld cracks before the hinge itself gives out. The gate then sags diagonally, and no amount of latch adjustment fixes it. We weld on site, with the gate in place or lashed in your driveway, and we reinforce that junction rather than just re-running the same bead that cracked the first time. If the hinge barrel itself is wallowed out, we replace the hinge and often add an anti-wear bushing so the pin doesn’t chew through the new one. Weld and hinge repair on a North Bend farm gate typically runs $150-$400. Call (877) 610-2993 and Hal can tell you over the phone whether it’s a weld fix or a hinge replacement.
Yes, King County requires entrapment protection on automatic gate operators, and photo-eyes are the standard way to meet it. The operator must stop and reverse if the beam is broken while the gate is closing, and on a long North Bend driveway that means the eyes need to be mounted at a height and distance that actually catch a vehicle or a person, not just a pair bolted to the gate posts as an afterthought. We install and aim them as part of every operator repair or replacement, and we test them under real conditions. If you’ve got an older operator with no photo-eyes or one that was bypassed by a previous installer, that’s a safety issue, and we’ll flag it plainly. The estimate for bringing it up to code is free, and it’s quoted before any work begins.
Contact Gatewood Fence & Gate for Gate Repair in North Bend
We know North Bend’s roads, its floodplain, its horse properties, and its weather. That’s not marketing copy; it’s the reason we can tell you over the phone what your gate likely needs before we even put the truck in gear. Call (877) 610-2993 any hour, any day. A live person answers. We’ll schedule the visit, show up in the window we promise, and quote everything in writing before any work starts. The 90-Day Done Right Promise is stamped on the invoice, and Hal’s name is on the shop. The name is on the shop, and the shop is down the road - that is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Bend since 2001.