Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Bend
Gate hinge replacement in North Bend typically runs $180-$420 per hinge, custom bracket or frame welding runs $120-$250 per hour of shop time, and full post replacement on a heavy swing gate runs $600-$1,300 depending on footing depth and gate weight. Most jobs are quoted and scheduled within 48 hours, with emergency storm response available around the clock. If your gate is leaning, dragging, or stuck after the last big rain, call Gatewood Fence & Gate at (877) 610-2993 and Hal will tell you straight what it needs. The name is on the shop, and the shop is down the road, which is the oldest accountability there is.
Why Gatewood Fence & Gate Is North Bend’s Preferred Gate Parts & Welding Company
North Bend is not a generic suburb. It sits in the Snoqualmie River valley with the Cascades rising right behind it, and the gates here take weather that gates in Issaquah or Klahanie never see. We have been owner-operated since 2001, and Hal Gatewood still answers the phone himself. Our Gate Parts & Welding team knows that a gate off 428th Ave SE behaves differently than one up on the bench, because floodplain silt and Cascade snow loads do different things to steel and timber.
Customers in 98045 call us because they want a person, not a queue. A live person answers every call, 24 hours a day, seven days a week. When your gate will not close and the horses are out, that matters. We publish our address and license number. Hal’s name is on every invoice, and every job carries the 90-Day Done Right Promise in writing. If it is not done right, we make it right. One call brings him back.
We serve North Bend with the same crew that handles the rest of King County. Scheduling is coordinated from our Seattle office, but the people who show up know North Bend roads, North Bend mud, and North Bend gates. You are not getting a fresh recruit reading a GPS. You are getting someone who has reset posts in North Bend floodplain silt for years.
Our Gate Parts & Welding Services in North Bend
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. North Bend’s constant humidity chews through hinge pins and weld points faster than you would believe. A hinge that lasted fifteen years in Bellevue can look rough in five here. We replace hinges with properly sized weld-on barrel or strap hinges matched to the gate’s actual weight, then re-hang the gate so it clears the latch and swings square. Hinge replacement in North Bend runs $180-$420 per hinge, including grinding off the old weld.
Post Replacement
This is the big one for North Bend. The valley floor soils resaturate every winter, and posts set in that silty ground shift and lean as the soil compacts. Fix the panel without the post and you will fix it twice. We dig out the old footing, re-set the post in fresh concrete with a wider base, brace it square, and let it cure before re-hanging the gate. Full post replacement runs $600-$1,300 for a typical driveway swing or slide gate, more if the gate is heavy solid steel or the footing needs excavation deeper than standard.
Rail Repair
Heavy wet snow off Snoqualmie Pass bends gate frames that were never designed for it. A bent top rail throws the whole gate out of square, and by spring the latch will not line up. We straighten what can be straightened and replace what cannot, then weld the joints solid. If your gate frame has been patched before and failed, we will build it right with heavier tube stock so it actually survives the next storm cycle. Rail repair in North Bend runs $150-$400 depending on how far gone it is.
Custom Welding
North Bend has more farm-style gates, livestock entries, and long automated driveway gates than almost any city in King County west of the mountains, which is why Gate Installation - North Bend often requires custom work. That means off-the-shelf parts do not always fit. We weld on site, in your driveway, so the gate stays where it is. Custom brackets, hinge plates, frame reinforcements, and operator mounts are all built and welded in place. On-site welding runs $120-$250 per hour including materials for most jobs. If someone has already been out and the weld cracked, call us. Show me the gate closing on its own and I will show you where it is failing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Bend
We service and stock parts for our Gate Motor & Opener in North Bend brands that show up on properties constantly: FAAC and BFT operators on long rural driveway gates, Linear openers on residential slide gates, and Viking operators on heavier commercial and equestrian entries. If your operator is older or discontinued, we will find a compatible solution rather than telling you to rip out the whole setup. Parts arrive from our local stock fast, and the person who installs them is the same person who ordered them. No faceless middleman, no lost paperwork.
Common Gate Parts & Welding Problems We See in North Bend Homes
- Hinge posts leaning after winter storms. Floodplain silt resaturates and compacts every time the Snoqualmie River floods, and a post that was plumb in August can be three inches out by January. That throws swing gates out of alignment and makes latches miss.
- Bent frames from heavy wet snow. Snoqualmie Pass storms load gates with snow that sticks and freezes. Lighter gate frames not engineered for alpine-adjacent conditions bend under the weight, and a bent frame is a welding job, not a hinge job.
- Rust on hinges, latches, and rack-and-pinion hardware. North Bend sits in near-constant humidity from Pacific moisture stacked against the Cascade foothills. Hardware here rusts far faster than in Issaquah or Bellevue, especially on older timber post-and-rail farm gates.
- Timber gate components rotting. Older valley farmhouses and horse properties often have timber post-and-rail gates with hardware that predates modern coatings. Untreated wood components rot fast in this climate, and we frequently weld steel reinforcement brackets onto aging timber gates to keep them serviceable without replacing the whole structure.
Pricing for Gate Parts & Welding in North Bend, WA
North Bend pricing is honest, and you will know the number before we start. Hinge replacement runs $180-$420 per hinge. Custom welding runs $120-$250 per hour including materials for most jobs. Post replacement runs $600-$1,300 for a standard driveway gate, higher for heavy solid steel or deep excavation. Rail repair runs $150-$400. Every quote is agreed before any work begins, in writing, and the price does not change at the door. That is the whole point.
We offer $40 off any repair over $200, no trip charge inside King County, and a permanent 10% discount for seniors and veterans. If you have a written estimate from another company, bring it in for a free second opinion. Hal will tell you if it is fair or if you are paying for work the gate does not need. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near North Bend
We serve Gate Parts & Welding in North Bend and the surrounding area, including Snoqualmie, Hobart, Issaquah, and Klahanie. If you are on a rural parcel outside city limits, we still come to you. Same crew, same warranty, same live person on the phone.
Serving North Bend, WA - Our Local Coverage Area
We’re based in the North Bend area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Bend
Your hinge post is almost certainly shifting as the floodplain soil beneath it resaturates and compacts. North Bend’s silty valley-floor soils settle seasonally after the Snoqualmie River rises, and even a half-inch of post movement is enough to make the latch miss and the gate drag. The fix is resetting the post in a wider concrete footing so the load spreads across more soil, then re-hanging the gate square. It costs more than nudging the hinges, but it actually holds. Call (877) 610-2993 and we will come look.
Yes, and we do it more often in North Bend than anywhere else we work. We cut out bent or undersized tube sections and weld in heavier steel, often adding gussets at stress points where Cascade wet snow loads concentrate. The work is done on site so the gate never leaves your property. Expect $150-$400 for a typical reinforcement job depending on how much steel gets replaced. The alternative is buying a whole new gate, which is usually not necessary.
For Gate Access Control in North Bend, locate the release handle on your operator, usually a pull cord or small lever near the motor. Pull it to disengage the motor from the gate, then push or slide the gate open by hand. Do not force an automated gate against a powered motor. Once power returns, re-engage the release and cycle the gate once to confirm the limits are still set correctly. If the gate will not release or re-engage, leave the breaker off and call (877) 610-2993. Show me the gate closing on its own and I will show you where it is failing.
Usually yes. Timber farm gates on horse properties need strap hinges with a broad mounting plate and through-bolts, not light screw-on hardware. The wood moves with North Bend’s humidity, and a properly sized strap hinge moves with it without tearing out the fasteners. We also see a lot of older gates where someone bolted a residential hinge onto a gate that weighs three times what the hinge was rated for. That is how gates start dropping. Expect $180-$420 per hinge to do it right with hardware sized for an equestrian gate.
Every six months, and more often if the gate sits where winter floodwater pools. North Bend’s silt and moisture eat slide-gate rollers and bearings faster than you would think, and a seized roller turns into a bent rack or a burned-out motor if you keep running the gate on it. We check roller wear, clean the track, and replace rollers when they start to flat-spot. Most roller replacements run $120-$250, far cheaper than a new operator. Call (877) 610-2993 and we will put an inspection on the schedule.
Heavy Weather Gate Damage? Call Before the Gate Gets Worse
The worst thing you can do with a leaning post or a bent frame is keep using the gate. Every cycle against a failing post or warped rail puts stress on the operator, the latch, and the other hinges. What starts as a $300 welding job becomes a $1,500 operator replacement when the motor burns out fighting the misalignment.
We recently reset a twisted hinge post on a tubular steel driveway swing gate off 428th Ave SE after heavy rain left the post leaning three inches out of plumb. We dug out the saturated silty footing, re-set the post in fresh concrete with a wider base, and welded a new hinge plate before re-hanging the gate so it cleared the latch and closed square. That gate would have been dragged off its hinges within a month. Instead it swings true and the customer still has the original gate.
If your gate is stuck, leaning, or refusing to latch, call Gatewood Fence & Gate at (877) 610-2993. Hal will answer. You will get an honest assessment, a written price before any work starts, and the 90-Day Done Right Promise on every job. North Bend’s storms are not going to get lighter, and a gate that is failing will not fix itself. We have been doing this since 2001, and we are down the road, not three states away.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Bend and the Snoqualmie Valley.