Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Norman
Gate repair in Norman usually costs between $140 and $420 for common fixes like hinge replacement, gate realignment, or opener board repair. A full post reset with new concrete runs $280-$650. Wind damage from spring storms and red-clay soil heaving are the two big reasons gates fail here, and most jobs we see are finished same day or next day. If your gate is sagging, won’t latch, or the opener is grinding, call Hal at (877) 610-2993 and he’ll tell you straight what it needs and what it costs.
We’ve been driving Norman streets from Lindsey to Tecumseh since 2001, and we know exactly what those 2000s-era builder gates in west Norman do when an Oklahoma thunderstorm rolls through. You’re not calling a call center. You’re calling a shop with a published address and Hal Gatewood’s name on the door.
Why Gatewood Fence & Gate Is Norman’s Preferred Gate Repair Company
Norman homeowners call us because we answer the phone and show up. Hal founded Gatewood Fence & Gate in 2001, and the business has stayed owner-operated ever since. When you call (877) 610-2993, a live person picks up. Not a voicemail. Not an automated menu. That matters when your driveway gate is stuck open at 10 p.m. and you want someone to actually answer.
We’re local to the Oklahoma City metro, with crews serving Norman every day. Our techs know the 73026 subdivisions off Highway 9, the older 73069 and 73071 neighborhoods near the OU campus, and the 73072 communities southeast toward Lake Thunderbird. In west Norman especially, many of those rear-alley iron swing gates were installed by the same handful of fence contractors during the 2000s and 2010s buildout. We stock the hinge hardware and latch styles those builders used, so we can often fix a gate in one trip without waiting on a parts run.
Every job carries the 90-Day Done Right Promise, in writing. If it’s not done right, Hal comes back and makes it right. That’s not boilerplate. That’s his name on the invoice.
Our Gate Repair Services in Norman
Electric Gate Repair
Electric gate openers in Norman get hit by two things: Oklahoma wind and Oklahoma power. Straight-line winds over 60 mph push against gate panels and force the operator’s gear train to work harder than it was ever spec’d for. After enough storms, gears strip and motors burn out. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers, and we can retrofit older units with aftermarket control boards when the original part is obsolete. A standard electric gate repair in Norman runs $120-$380 depending on what’s failed.
Automatic Gate Repair
Automatic gates around Norman fail in predictable ways. Limit switches drift. Photo-eyes get knocked out of alignment. Receiver boards stop reading remotes. We trace the actual fault rather than swapping parts until something works. If your builder-installed slide gate in 73026 is binding under wind load, we’ll show you where the rail is flexing and what reinforcement makes sense. Automatic gate repair typically runs $130-$420 in Norman, and that price is quoted and agreed before we turn a wrench.
Hinge & Post Repair
Here’s the thing most people don’t know: a gate sags in the hinge post, not in the middle. Cleveland County’s red-clay soil expands when it’s wet and shrinks when it’s dry. Over a few Oklahoma seasons, that cycle rotates posts in their footings. The gate starts drooping, the latch misses, and eventually the panel drags the ground. We dig out the old footing, re-set the post in fresh concrete, and re-plumb it properly. Hinge and post repair in Norman runs $280-$650 depending on post size and how much concrete the original builder skimped on.
Gate Realignment
Realignment is the repair that fixes what the post heave and wind stress knocked out of square. We adjust hinge geometry, re-set latch alignment, and re-level the gate panel so it swings clean and seals right. On operator-driven gates, realignment includes re-setting the limit stops so the motor isn’t fighting a bound-up panel. A standard gate realignment in Norman runs $100-$250, and it’s often the difference between a gate that lasts another decade and one that eats an opener every two years.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Norman
We’re certified to service nine major gate brands, and Norman homeowners most often call us about FAAC, BFT, and Linear operators on older automatic gates, plus Viking and LiftMaster on newer installs. We keep common boards, photo-eyes, and remote receivers stocked for the brands Norman fence contractors installed most. If your opener predates current UL 325 standards, we’ll walk you through what can be retrofitted and what’s safer to replace. The goal is always repair first for the honest reason: most older gates in Norman are mechanically sound and just need the right part and the right adjustment.
Common Gate Repair Problems We See in Norman Homes
- Post rotation from red-clay heave. Cleveland County soil swells when wet and contracts when dry, and that seasonal cycle walks gate posts out of plumb. Even a gate that’s never been hit by wind will start sagging and missing the latch. We re-set posts with proper-depth footings and re-plumb the hinge geometry.
- Wind-stressed 2000s-era slide gates. West Norman’s 73026 and 73072 subdivisions standardized on lightweight aluminum slide gates that weren’t spec’d for sustained 60+ mph gusts. The panels flex, the rollers bind, and the operator geartrain takes the punishment. We reinforce the rail, replace worn rollers, and re-tune the operator limits.
- Obsolete control boards. Many Norman gates installed between 1995 and 2010 are running original-equipment control boards that are no longer manufactured. When they fail, the manufacturer’s answer is a full operator replacement. Our answer is often an aftermarket retrofit board at a third of the cost, and we’ll tell you plainly which route is smarter for your gate.
- Builder-grade hinge hardware wearing out. The iron swing gates on rear alleyways in 73026 neighborhoods share nearly identical hinge styles from the dominant local fence contractors of that era. Those hinges are now 15 to 20 years old and near the end of their service life. We stock the exact replacements, which means we can often do the repair the same day we look at it.
Pricing for Gate Repair in Norman, OK
Here’s what we see in Norman, straight numbers. A hinge repair replacing two worn hinges runs $140-$240. Gate realignment runs $100-$250. Post reset with new concrete runs $280-$650 depending on the post size and how much digging is involved. Electric opener repair, including a new control board or limit assembly, runs $120-$380. A complete operator replacement, when repair genuinely doesn’t make sense, runs $650-$1,800 installed. You get the exact price before we start, it’s in writing, and it doesn’t change at the door. No trip charge inside Cleveland County. $40 off any repair over $200. Seniors and veterans always get 10% off. Call (877) 610-2993 for a free estimate.
And here’s the honest part about the older gates around Norman. A 2005 builder-installed slide gate in 73026 with a binding rail and a tired LiftMaster operator can sometimes cost more to patch repeatedly than to replace once. We’ll show you the math on your specific gate. Fix the panel without the post and you’ll fix it twice. Our job is to tell you which repair actually holds.
We saw this recently in a 2000s-era subdivision in 73026. A builder-installed iron swing gate on a rear alleyway had sagged so badly the latch wouldn’t engage, and the homeowner had been propping it shut with a cinder block for months. The hinge post had rotated in its footing from freeze-thaw cycles, throwing the gate panel out of plumb. We re-set the post with fresh concrete, replaced the worn hinge hardware with the common style used by the dominant Norman-area fence contractors of that era, and retrofitted a safety photocell onto the older opener to satisfy UL 325 entrapment protection. The gate swings true now. That job took one afternoon, and the homeowner had been quoted a full gate replacement by another company.
We Also Serve Cities Near Norman
If you live in Noble, Moore, Newcastle, or Blanchard, we cover those areas too. The same Gate Repair in Norman crew that handles west side subdivisions and campus-area homes will come to your place with the same stock of parts and the same 90-Day Done Right Promise. Dispatch and scheduling are coordinated from our Oklahoma City office, with crews serving Norman and the surrounding communities every day.
Serving Norman, OK - Our Local Coverage Area
We’re based in the Norman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Norman
Your gate is drooping because the hinge post is rotating in its footing, not because the gate panel bent. Cleveland County’s red-clay soil swells during wet spring weather and shrinks during dry spells, and that cycle slowly walks the post out of plumb. Each wet-dry round moves it a little more, so every spring the gate hangs slightly lower. The fix is a post reset in fresh concrete, not a new gate panel. Call (877) 610-2993 and we’ll tell you if your post is the problem.
In most cases we can repair it. The 73026 subdivisions built through the 2000s and 2010s used remarkably consistent gate hardware from a few local fence contractors, and we stock those exact hinge styles, roller assemblies, and latch components. Unless the gate frame is structurally cracked or the rail is bent beyond straightening, repair makes sense. We’ll show you what’s actually worn and what it costs before you decide anything.
Yes. UL 325, the national safety standard for automated gate operators, requires working entrapment protection on any automatic gate opener, and that standard applies retroactively to gates in use today. A gate with no working photo-eyes or contact edges can crush a child or pet, and the homeowner carries liability. We can retrofit photo-eyes and safety edges onto most older LiftMaster, FAAC, BFT, and Linear operators in Norman, typically for $120-$250. If the operator is too old for a proper retrofit, we’ll tell you that straight and give you a replacement price.
Straight-line winds from Norman thunderstorms routinely exceed 60-70 mph, and those gusts absolutely apply enough force to lean a gate post, especially the lightweight posts builders used in 2000s-era subdivisions. Norman is home to NOAA’s Storm Prediction Center, and the severe-weather pattern that keeps them busy is the same pattern that batters your gate every spring. A leaning post usually means the footing wasn’t deep enough or the concrete wasn’t adequate for Oklahoma wind loads. We re-set it properly.
Look at the gap between the gate and the post at both hinges. If both hinges show a consistent gap or a consistent bind, the post has rotated. If the gap is tight at one hinge and wide at the other, the hinge itself is worn. You can also sight down the post from the side. If it’s not visually vertical, that’s your answer. We’ll confirm it in about ten minutes when we look at it, and the fix is usually a post reset rather than anything involving the gate panel. Call (877) 610-2993 for a free estimate.
Get Your Norman Gate Fixed Right
If your gate is sagging, stuck, grinding, or just not latching the way it should, call Hal at (877) 610-2993. You’ll get a straight answer, a written price, and a repair that holds. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Norman since 2001.