Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Newburg
A sagging gate in Newburg is rarely just a hinge problem. It’s usually a post problem, and in this part of Jefferson County that post is fighting clay soil that swells and shifts with every wet winter and spring thaw. Gatewood Fence & Gate has been fixing gates the right way since 2001, and Hal Gatewood still shows up to look at the job himself. If you’re in the 40218 zip code and your gate won’t close, drags on the ground, or the opener quit after the last ice storm, call (877) 610-2993 and a live person answers. We’ll be straight with you about what’s wrong and what it costs before any work starts.
Why Gatewood Fence & Gate Is Newburg’s Preferred Gate Repair Company
We’re not a franchise that sends a different face every time. Hal Gatewood owns the company, his name is on the shop, and he’s been welding and repairing gates in this area for over two decades. That matters in Newburg, because the housing stock here has a specific problem: original posts from the 1950s through the 1970s, set in clay that heaves, with hinges that have been rusting for fifty years. A technician who only knows new construction gate systems will misdiagnose that every time. We see a lot of chain-link and wood-frame gates on the brick ranch homes around Poplar Level Road and the neighborhoods off Preston Highway, and we know the failure pattern before we even back the truck in.
Every repair carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back, no runaround. We answer the phone with a live person around the clock, not a voicemail or a call queue. And because we keep our shop stocked with common parts for the brands Newburg homeowners actually run, we’re not waiting on a warehouse shipment to get your gate swinging again.
Our Gate Repair Services in Newburg
Hinge & Post Repair
This is the bread-and-butter repair in Newburg, and it’s the one most other companies get wrong. When a gate post leans, the fix is not a longer screw in the hinge. The fix is getting the post plumb again or replacing it at the proper depth. On a typical 1950s brick ranch lot in 40218, we regularly find post footings only 24 to 36 inches deep, and that’s simply not enough for Jefferson County clay. We spec 42 to 48-inch footings with a flared base and ground-contact-rated pressure-treated posts. Hal welds new hinge plates on site so we’re not giving you a whole new gate when the panel is still good. Our Gate Repair team handles hinge and post work as a single system, because fixing one without checking the other means doing it twice.
Gate Realignment
A gate that drags the driveway or won’t latch usually hasn’t “gone bad” in the middle. The post moved, and the panel followed. In Newburg, where the freeze-thaw cycle happens multiple times every winter, posts can shift out of plumb by two or three inches in just a couple of seasons. We realign the frame, correct the sag, and set the latch so it actually catches. On older wood gates, we’ll also check that the hinge bolts aren’t stripped out of the post, because that’s the second failure we see constantly on the 1960s through 1980s homes here.
Automatic Gate Repair
You push the remote, and nothing happens. Or the arm starts, groans, and stops. In Newburg, the biggest culprit after a hard winter is moisture and ice working into the operator housing. Louisville sits in the Ohio Valley ice storm belt, and freezing rain coats more than just the driveway. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We’ll tell you honestly whether the board can be rebuilt or the whole unit needs replacing, and we’ll show you the old part, not just hand you an invoice.
Electric Gate Repair
Electric gates on Newburg properties range from simple single-swing actuators to dual-arm systems on wider driveways. The wiring, safety edges, and keypads all take a beating from the weather here. We test the system end to end before we leave, and we take the time to set the close force correctly so the gate stops cleanly instead of slamming. A misadjusted operator is a finger hazard, and it also burns out the motor early. If your gate has exposed 120-volt wiring or a broken safety edge, don’t attempt a DIY fix; a wrong splice can be lethal and a nonfunctional edge can injure someone. Call us and we’ll make it right.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Newburg
Gatewood Fence & Gate is certified to service nine major operator brands, including FAAC, BFT, Linear, and Viking. That covers the systems most commonly installed on Newburg driveways, from older chain-driven units to current solar-ready models. Because we stock boards, arms, capacitors, and limit switches for these brands locally, a repair that another company would schedule out two weeks often happens for our Newburg customers in one visit. We don’t push you to replace a whole operator when one component failed. We fix what’s broken and leave the rest alone.
Common Gate Repair Problems We See in Newburg Homes
- Hinge post lean from clay heave. Jefferson County clay expands when wet and contracts when dry, and Newburg’s older gates were set too shallow to resist it. The post tilts, the gate sags, and the latch stops lining up.
- Rusted or stripped hinges on aging wood posts. Most of Newburg’s ranch homes still have their original gate frames. Lag bolts pull out of weather-softened wood, and hinges corrode until the panel drops.
- Frozen automatic operators after ice storms. Freezing rain coats the gate and the operator, then water seeps into the housing. The arm jams, the gears strip, or the board shorts.
- Sunken concrete footings. We see footings that have settled into wet clay and left the gate cocked to one side. This is a Newburg signature problem, and it’s why we cut out and repour the base instead of stacking washers under the hinge.
Pricing for Gate Repair in Newburg, KY
We Also Serve Cities Near Newburg
If you’re just outside Newburg, you’re still in our service area. Our crew regularly works in Buechel, Highview, Louisville, and Okolona. If your gate is giving you trouble on a side street in one of those areas, call us at (877) 610-2993 and we’ll put you on the schedule. The same live person answers, and the same 90-Day Done Right Promise applies. You can read more about our local coverage on the Gate Repair in Newburg page.
Serving Newburg, KY - Our Local Coverage Area
We’re based in the Newburg area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Newburg
Why does my Newburg gate post keep leaning after I straighten it?
Your post keeps leaning because it was set too shallow for Jefferson County clay. The clay expands with winter moisture and pushes against the buried section of the post, and a 36-inch footing simply has no leverage against that force. We fix it by removing the old footing, drilling or cutting to 42-48 inches, and pouring a flared base with a ground-contact-rated post. That depth gives the clay nothing to push on sideways. Call (877) 610-2993 if you’re tired of wrestling with the same lean every spring. We’ll set it once and it stays.
How do you handle a chain-link gate that has sagged on a 1960s ranch lot in 40218?
We start at the hinge post, not the sag. On a 1960s ranch in Newburg, the hinge post has usually tilted inward and the hinges have wallowed out their holes in the post. We cut out the old concrete base if it’s sunken, set a new 48-inch flared footing with a pressure-treated post, and weld fresh hinge brackets on site. Then we adjust the tension and hang the original chain-link panel back in line. If the panel itself is still sound, there’s no reason to buy a new one. We’ll give you a written price before any of that starts, and it’s good for the whole job.
Can you repair an automatic gate operator that froze solid after an ice storm?
Yes, most of the time we can. An ice storm in Newburg forces water into the operator housing, and when it freezes, the arm jams or the control board shorts. We open the unit, dry and test the board, replace failed capacitors or limit switches, and re-grease the drive. If the motor itself burned out, we’ll quote you a replacement from a brand we stock, like BFT or Viking. The repair usually happens the same visit, and you’ll know the cost before we crack the case open. Call (877) 610-2993 and we’ll get it on the schedule.
Do I need a special footing for heavy farm gates on long Newburg driveways?
You do, and it’s not just about weight. A heavy farm gate on a long driveway catches wind like a sail even when it’s not moving, and that lateral force works against a shallow footing every single day. Add Newburg’s clay soil, and the standard 36-inch post depth fails within two or three seasons. We set agricultural gate posts at 42 to 48 inches with a flared concrete base and use ground-contact-rated posts. We also size the operator for the panel’s actual weight and width, which matters more on wide openings than on a typical suburban walk gate. Call us at (877) 610-2993 for a free measure and a written price specific to your driveway.
What’s the most common gate repair on Newburg’s older brick ranches?
Hinge post lean and sagging panels. The brick ranches in 40218 were mostly built between the 1950s and 1980s, and their original gate posts were never set deep enough for Jefferson County’s expansive clay. After decades of freeze-thaw cycles and wet winters, the posts tilt, the hinges strip out, and the panel drags. We see it on nearly every older chain-link and wood-frame gate we service in Newburg. The repair is straightforward for a team that does it every week, and we’ll have the gate swinging properly again without replacing a panel that doesn’t need replacing.
Call Gatewood Fence & Gate for Gate Repair in Newburg, KY
If your gate leans, drags, or won’t open, call (877) 610-2993. A live person answers, day or night. We’ll give you a straight answer on price before any work starts, and every repair is backed by our 90-Day Done Right Promise in writing. Hal Gatewood has been doing this work since 2001, and his name goes on every invoice. You can drive to the shop and look him in the eye. For fence and gate work in Newburg, that’s the kind of accountability that matters.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Newburg and the surrounding Jefferson County area since 2001.





Before
After
Before
After
Before
After