Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Newburg
Most gate breakdowns in Newburg come down to two things: posts that have moved and parts that have finally worn out. In 40218, we see both every week. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and he still answers the phone. If you need gate parts, on-site welding, or a hinge post dug out of Jefferson County clay and set right, call (877) 610-2993. We serve Newburg directly and a live person picks up every call, day or night.
Why Gatewood Fence & Gate Is Newburg’s Preferred Gate Parts & Welding Company
Most of the gates we work on in Newburg are original to the house. That means 1950s, ’60s, and ’70s installations with posts set 36 inches deep in clay that has been pushing them around for half a century. We know what the soil here does, and we build for it. You are not getting a trainee with a truck and a price sheet. You are getting Hal, or one of his background-checked crew members, doing the work in your driveway.
Every job in Newburg carries our 90-Day Done Right Promise in writing. If it is not done right, one call brings us back. No runaround, no fine print. That promise has been the backbone of this business since 2001, and it applies to hinge replacements, post replacements, rail repairs, and custom welding the same way it applies to a full gate install.
We also make pricing simple. You get a quoted price before any work starts, and that is the price you pay. There is a free second opinion on any written estimate from another company, no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. A live person answers 24/7, not a voicemail box.
Our Gate Parts & Welding Services in Newburg
Our Gate Parts & Welding service runs from small hardware swaps to structural welding, and we do it all on site. Here is what we handle most in Newburg:
Hinge Replacement
Old hinges on 1950s-to-1980s ranch homes and split-levels in Newburg are often corroded to the point of seizure, or the bolts have stripped out of aging wood posts. We cut off the old hardware, clean the post face, and weld or bolt new hinges in line with the gate’s true plumb. If the post itself is done for, we tell you before we touch the hinge.
Post Replacement
Here is the thing about Newburg: standard 36-inch footings do not survive Jefferson County’s expansive clay. We regularly dig out posts that have leaned a full inch or more out of plumb after two or three wet winters. Our fix is a flared footing at 42 to 48 inches with ground-contact-rated pressure-treated posts. That spec would be overkill in sandy subdivisions a few miles east, but it is exactly what 40218 soil demands.
Rail Repair
Chain-link and wood-frame gates in Newburg take a beating from ice storms that roll through the Ohio Valley. Rails bend, crack at the welds, or pull loose from the hinge and latch posts. We straighten what can be straightened and weld cracks shut where the metal is still sound. If a rail is too far gone, we replace that section instead of hanging a whole new gate.
Custom Welding
Some repairs need a weld, not a parts catalog. Our Custom Welding handles cracked frames, broken hinge mounts, damaged latch plates, and gates that need reinforcing. The work happens in your driveway, which means the gate stays where it belongs and you see exactly what was done. Hal welds on site so the repair fits the gate as it hangs, not as it sat on a shop floor.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Newburg
We rebuild and service operators from FAAC, BFT, Linear, and Viking, plus LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Newburg’s older gates, that often means tracking down a compatible control board or retrofitting a photo-eye when the original is no longer made. We keep common parts on the truck, and when a board is truly obsolete, we will tell you straight instead of wiring around a safety feature and calling it done.
Common Gate Parts & Welding Problems We See in Newburg Homes
- Posts heaving out of plumb. The expansive clay under 40218 swells in wet winters and shrinks in dry summers. A 36-inch-deep post does not stand a chance. The gate drags, the operator gears strip, and the cycle repeats until someone digs a proper 48-inch flared footing.
- Corroded hinges and stripped bolts. Older chain-link and wood-frame gates on compact Newburg lots often never got routine maintenance. Hinges seize, bolts strip out of aging wood posts, and the gate starts sagging toward the latch side.
- Dead photo-eyes on legacy operators. We see a lot of 1960s-to-1980s operators in Newburg with working motors and dead safety photocells. You cannot wire around a photo-eye. UL 325 compliance is not optional, and we will not leave an operator running without working entrapment protection.
- Ice-damaged control boards and frozen operators. Freezing rain in the Ohio Valley coats gates with heavy ice and seizes old operators solid. The control board takes the hit, and on 50-year-old units the part is often discontinued, which is when we walk you through the retrofit-versus-replace math honestly.
On a ranch-style home off Billtown Road, our crew found a 1960s chain-link swing gate with the hinge post leaned a full inch out of plumb and the original operator’s safety photocell dead. We cut out the rotted post, poured a 48-inch flared footing, and welded a new hinge post assembly before hanging the gate and rewiring the non-functioning photo-eye. The gate closed square without sag correction and the operator passed a UL 325 entrapment test.
Pricing for Gate Parts & Welding in Newburg, KY
A hinge replacement in Newburg typically runs $125-$275 depending on the hinge weight and whether we are repairing a wood post face. Post replacement runs $350-$750 per post, and that includes digging out the old footing, pouring a 42-to-48-inch flared base, and setting ground-contact-rated post. Custom welding starts around $100-$150 for a small crack repair and runs $250-$600 for structural frame work or hinge mount rebuilds. Rail repair runs $85-$225 depending on length and material. Every quote is written and agreed before work starts. Call (877) 610-2993 and we will come out, look at the gate, and hand you a number.
We Also Serve Cities Near Newburg
If you are just outside the 40218 line, we also cover Gate Parts & Welding in Newburg and the surrounding areas, including Buechel, Highview, Louisville, and Okolona. The gate issues in those neighborhoods are often the same, but when we cross into Newburg proper we know to expect the older ranch stock and the clay that moves with every freeze-thaw cycle.
Serving Newburg, KY - Our Local Coverage Area
We’re based in the Newburg area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Newburg
Because the post was almost certainly set 36 inches deep in Jefferson County’s expansive clay. That soil swells and shrinks with every rain and freeze, and a shallow footing will move. The fix is digging to 42 to 48 inches with a flared base and ground-contact-rated post. Straightening a post without fixing the footing is a temporary bandage. Call (877) 610-2993 and we will set it so it stays.
No. We will not bypass a photo-eye because a gate closing on a person, pet, or car is exactly what that sensor exists to stop. UL 325 entrapment protection is not optional and we stand behind that. What we can do is source a retrofittable photo-eye that works with your operator, or show you a cost comparison if the board is too obsolete to pair with modern safety hardware. The quote is free.
For 40218, we set gate posts at 42 to 48 inches with a flared base. Standard 36-inch footings are not enough for the expansive clay here. The flare and the extra depth give the post enough bearing surface to resist the heave that pushes shallower posts out of plumb within two or three seasons. It is a detail we learned doing this work in Newburg for decades, and honestly it saves you money over resetting the gate a second time.
If the hinge post is leaning, welding the panel straight fixes the wrong problem. The gate sags because the post moved, and the panel will sag again the moment it is put back under load. We replace the post and get it truly plumb first, then weld or straighten the panel. If the panel frame is cracked, we weld the crack in place. You get one repair that holds. Call (877) 610-2993 for a free estimate and we will tell you exactly what your gate needs.
It is usually one of three things: the loop detector has failed, the control board has a bad closing relay, or the photo-eye circuit is interrupting the close command. We diagnose it on site with the operator in front of us, and we will not sell you a board if the loop detector is the problem. A diagnostic visit in Newburg is free inside the county, and you get a written price before any part is ordered or any repair is started.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Newburg since 2001.