Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Mount Clemens
Gate repair in Mount Clemens usually runs between $180 and $650 depending on whether we’re re-anchoring a hinge into a century-old brick pillar or retrofitting a modern operator onto a 1920s wrought-iron gate. Most jobs in the historic core are finished same-day because we weld on site, right in your driveway. If your gate won’t close, drags on the ground, or has a hinge pulling out of the masonry, call (877) 610-2993 and Hal will talk you through what he’s seeing before anyone rolls a truck.
We work the older streets of Mount Clemens every week. The blocks off Gratiot, the Victorians up toward Crocker, the foursquares down near the Clinton River – those are our regular stops. What makes this town different from the subdivisions around it isn’t the gate styles you’ll find at a box store. It’s the age of the iron, the condition of the pillars, and the fact that when something fails here, the fix is usually more involved than bolting on a new hinge leaf.
Why Gatewood Fence & Gate Is Mount Clemens’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and his name is still on the door and on every invoice. We’re not a franchise and we don’t run a call center. When you call us from Mount Clemens, a live person answers, and the person who shows up is accountable to a guy whose cell number you can have. That matters when you’ve already been burned by an outfit that quoted one price over the phone and changed it at the driveway.
Our repair-first approach catches people off guard, mostly because they’re used to companies that want to sell a whole new gate. We don’t. If a hinge can be re-anchored and re-pointed, that’s what we do. If a control board can be rebuilt or a safety edge rewired, we fix it before we talk replacement. And every job we do in Mount Clemens carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround, no fine print.
We’ve worked gates in Mount Clemens long enough to know the failure patterns specific to this town. A sagging gate on a 1920s Craftsman off Gratiot is rarely a hinge leaf problem. It’s a mortar problem. A gate that opens fine in December and drags in March along the river is frost heave, not a bent post. Knowing the difference means we fix the actual cause instead of selling you a part that treats the symptom.
Our Gate Repair Services in Mount Clemens
Electric Gate Repair
Electric gate failures in Mount Clemens split two ways. Older homes with 1990s-era operators usually have obsolete control boards, and we can often rebuild or retrofit those with modern safety protection. Newer systems fail at the photo eyes, the receiver, or the arm itself. We service the electronics in your driveway, test entrapment protection before we leave, and stock parts for Linear, Viking, and DoorKing so we’re not making you wait on a shipment.
Automatic Gate Repair
Automatic gates around Mount Clemens take a beating from the freeze-thaw cycle, especially in 48043 near the river. When the ground heaves, the post moves, and suddenly the opener is fighting the gate instead of pulling it. We realign the post, shim the hinges, and re-set the travel limits so the operator isn’t working against a bind. If the motor is still good, we don’t sell you a new one.
Hinge & Post Repair
This is the Mount Clemens specialty, and it’s the one that separates us from companies that mostly work new subdivisions. When a hinge anchor pulls free from an original brick pillar, the right fix is to remove the post, rebuild the footing below frost line, re-point the mortar, fabricate a hinge leaf that matches the remaining iron, and re-anchor everything so it holds. We do all of that on site. We’ve pulled original Victorian hardware from pillars off South Broadway that crumbled in our hands, and we’ve rebuilt them to look like they’ve been there for a hundred years – because they have.
Gate Realignment
A gate that drags or won’t latch in Mount Clemens is usually a pillar that’s moved, not a gate that’s bent. Frost heave in the clay soil near the Clinton River shifts posts out of plumb every spring. We reset the post, rebuild the footing, and hang the gate so the reveal is even and the latch catches clean. If the iron itself is twisted, we can heat-straighten it or weld in a stiffener without pulling the whole gate off its hinges.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mount Clemens
We’re certified on Linear, Viking, Ghost Controls, DoorKing, and five other major brands, and we keep common repair parts for those systems stocked in our service trucks. That means when a Mount Clemens homeowner calls with a dead Viking operator or a Linear board that’s throwing codes, we usually fix it on the first trip. For older systems where the original board is no longer manufactured, we can often retrofit a current board with proper entrapment protection without replacing the entire operator. We’ll tell you straight when a legacy system isn’t worth putting money into.
Common Gate Repair Problems We See in Mount Clemens Homes
- Hinge anchors pulling out of brick pillars. The original mortar in many Mount Clemens pillars hasn’t been re-pointed in decades. Freeze-thaw cycles break it down to powder, the anchor loosens, and the hinge starts walking out of the brick. This is the single most common call we get in the pre-1930s core.
- Cast-iron gates sagging at the hinge post. Victorian hardware wears at the hinge knuckle over a century of use. The post settles in frost-heaved clay, the iron fatigues, and the gate drops until it drags. Fixing the panel without addressing the post means you’ll be back in six months.
- Legacy operators losing entrapment protection. A 1990s automatic gate that still runs fine mechanically may have a control board that no longer meets modern safety standards. When the photocells fail or the reverse sensor quits, you can’t just buy a replacement part – the whole board often needs retrofit.
- Rust and corrosion near the Clinton River. Riverside sections of 48043 see accelerated galvanic corrosion on iron and steel hardware because of the moisture and periodic flooding. We weld in fresh steel, treat the rust, and repaint with a cold-galvanizing primer so the repair doesn’t come back next season.
Pricing for Gate Repair in Mount Clemens, MI
Here’s what we charge in Mount Clemens, and we quote it before any work starts. A standard hinge re-anchor into a brick pillar runs $220 to $380. Rebuilding a post footing below frost line is $350 to $550. Gate realignment typically lands between $180 and $320. Electric gate troubleshooting and board replacement runs $250 to $650 depending on the system. Weld and rust repair on ornamental iron starts around $200 and goes up with the extent of the corrosion.
You get the final number before we touch the gate, and that’s the number on the invoice. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and ask Hal to come look at it. Estimates are free, and if you’ve already got a written quote from someone else, bring it – we’ll give you a second opinion at no cost.
We Also Serve Cities Near Mount Clemens
Our Gate Repair crew works Mount Clemens every week and takes appointments in Clinton Township, Fraser, Saint Clair Shores, and Roseville on the same routes. If you’re in one of those towns, the same live person answers the phone at (877) 610-2993 and the same 90-Day Done Right Promise applies. Gate Repair in Mount Clemens is what we do most, but the neighboring streets are familiar ground.
Serving Mount Clemens, MI - Our Local Coverage Area
We’re based in the Mount Clemens area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Mount Clemens
We remove the gate, pull the existing anchor, drill out the deteriorated mortar, and re-anchor the hinge into a rebuilt footing below frost line – usually with a custom-fabricated hinge leaf that matches the remaining iron. The repair costs $220 to $380 for a single hinge. Call (877) 610-2993 and Hal can tell you over the phone whether your pillar can be saved or needs to be rebuilt.
Yes, in most cases we can. The limiting factor is rarely the gate itself – it’s the post condition, the gate weight, and whether the existing foundation can take a modern operator. We’ll assess the pillar, tell you if a Linear or DoorKing arm will work, and give you a written price before any work begins. If the post needs rebuilding first, we do that in the same visit.
The clay soil under Mount Clemens’s riverside neighborhoods heaves when the ground freezes and thaws, and your gate post moves with it. We fix this by rebuilding the post footing below frost line so the post stops moving. That costs $350 to $550 in Mount Clemens depending on the post size and soil conditions.
If the gate is original to the house and the iron is mostly intact, repairing it usually costs less than half of what a comparable custom replacement would run, and it keeps the historic character of your home. We’ll cut out the rusted sections, weld in new steel, and treat everything with a cold-galvanizing primer. Replacement makes sense only when the iron is too far gone to weld safely.
Current standards require photo eyes or contact edges on both sides of the gate opening, plus a reversing mechanism that responds to obstructions. Many legacy operators in Mount Clemens don’t meet these requirements, which is a genuine safety concern for anyone with kids or pets. We retrofit modern entrapment protection onto existing gates every month. Call (877) 610-2993 for an inspection and a free quote.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mount Clemens since 2001.