Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Access Control Across Mount Clemens
Gate access control in Mount Clemens typically costs $350 to $1,400 for a single keypad, card reader, or phone entry system on a residential gate, and $1,800 to $4,500 when you’re adding video intercom or full smart access to a commercial lot near the courthouse. Most Mount Clemens jobs are done in one visit because we keep repair parts for Linear, Viking, and DoorKing on the truck and weld on site. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Mount Clemens’s Preferred Gate Access Control Company
Hal Gatewood started this shop in 2001 because he got tired of watching homeowners get charged for replacements when a repair would have done the job. That Gate Repair in Mount Clemens habit matters more here than almost anywhere else in Macomb County. Your neighborhood is full of original iron gates mounted on brick pillars that are pushing a hundred years old. A national outfit sees a sagging gate and quotes a full replacement. We see a hinge anchor that pulled out of un-repointed mortar, and we fix the anchor.
Every job carries our 90-Day Done Right Promise, in writing. If something isn’t right, one call brings Hal back. No runaround, no “your warranty department will review the claim.” The name is on the shop, the shop is down the road, and the person who quoted the job is the person who shows up.
Our Gate Access Control Services in Mount Clemens
Keypad Entry
Keypad entry is the workhorse of Mount Clemens gates. On the older blocks off Cass Avenue and North Avenue, we regularly mount keypads onto brick pillars that have been standing since the 1920s. The mistake we see most often is a keypad screwed into face brick that’s already spalling from forty freeze-thaw cycles a year. We drill deep, use threaded anchors, and seal the penetration so spring thaw doesn’t pop the unit loose. A basic Mount Clemens Gate Installation with keypad entry runs $350 to $700, including programming for multiple user codes. Wired versions cost less, wireless keypads slightly more when you need to run a receiver at the operator.

Card Reader
Card readers make sense on Mount Clemens multi-family properties and the commercial lots clustered around the county courthouse. We install proximity readers that work with HID or EM125 cards, and we tie them into existing operators from LiftMaster, BFT, DoorKing, Viking, and Linear. On older brick pillars, a flush-mounted reader can crack the mortar if the pillar flexes. We use surface-mount boxes with standoffs when the masonry isn’t solid enough for a flush cut. A single-door card reader setup on a Mount Clemens gate usually runs $800 to $1,800 with installation and a box of programmed cards.

Phone Entry
Phone entry is what Mount Clemens landlords and commercial tenants ask for most around the downtown courthouse district. A visitor pulls up, presses a button, and the system calls a mobile number or rings an office line. The person on the other end presses a key and the gate opens. Simple, nothing to carry, no card to lose. We install and repair phone entry on apartment gates, funeral home lots, church properties, and medical office parking. Typical phone entry installs in Mount Clemens run $900 to $2,000 depending on whether you want a single number or a full tenant directory. We also repair older phone entry units where the SIM card or landline module has died.

Video Intercom
Video intercom is the step up when you want to see who’s at the gate before you open it. On Mount Clemens’s historic blocks along Grand Avenue and Church Street, homeowners often pair a video intercom with an existing ornamental iron gate that was never designed for electronics. That means running low-voltage wire along ironwork without drilling through the original iron, and mounting a camera where it won’t interfere with the gate swing. Video intercom installs in Mount Clemens start around $1,500 and run to $4,000 depending on camera count, wiring run, and whether the Gate Motor & Opener - Mount Clemens setup needs a control board upgrade to talk to the intercom.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Our Gate Access Control Team at Gatewood Fence & Gate
Every person who shows up at a Mount Clemens property is background-checked, uniformed, and works for Hal Gatewood directly. We don’t send a subcontractor we’ve never met. Our Gate Access Control crew carries repair parts for nine major brands and a welder on the truck, so when a gate operator plate rips out of a brick pillar on a shared driveway, we fix it right there instead of hauling the gate to a shop.
Trusted Brands We Service in Mount Clemens
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Mount Clemens, the brands we see most are Linear on older residential keypads, Viking and DoorKing on commercial estate gates, and Ghost Controls on newer retrofit installations. Because we stock repair boards, receivers, and keypad components for these brands locally, most Mount Clemens repairs don’t wait on a parts shipment from a warehouse in Texas. Call (877) 610-2993 and we’ll tell you whether the part is on the truck before we even roll.
Common Gate Access Control Problems We See in Mount Clemens Homes
- Hinge anchors torn out of brick pillars. Mount Clemens’s historic-core blocks have original brick and stone pillars that were never repointed. After decades of freeze-thaw cycles, the mortar crumbles and a hinge anchor pulls right out. The gate sags, the keypad misreads, and the whole system looks broken when the real problem is a ten-dollar anchor and a bucket of mortar.
- Keypad and card reader housings cracked loose from sandstone or brick faces. Spring thaw near the Clinton River is brutal on surface-mounted electronics. Moisture gets behind the housing, freezes, expands, and pops the unit away from the pillar. We re-seat units with deep anchors and seal the back face so water can’t get in.
- Ground-loop detectors losing vehicle detection every spring. Riverside sections of 48043 get real frost heave. The buried loop wire shifts as the soil moves, and suddenly the gate won’t sense a car on a shared driveway. We repair and re-tune ground loops, and when a property floods repeatedly, we talk about converting to a photo-eye or radar-based vehicle detector that doesn’t sit in wet soil.
- Strike plates and maglocks misaligned on aging gate frames. A wrought-iron gate that’s been swinging on original hinges for ninety years rarely hangs perfectly plumb. When the frame flexes, an access control release stops engaging cleanly. We straighten, shim, and re-align rather than telling you to buy a new gate.
Pricing for Gate Access Control in Mount Clemens, MI
Here’s what we see in Mount Clemens, in real dollars.
| Service | Typical Price Range |
|---|---|
| Keypad entry install (residential single gate) | $350-$700 |
| Card reader install (single door, HID/prox) | $800-$1,800 |
| Phone entry install (single-number cellular) | $900-$1,600 |
| Phone entry install (multi-tenant directory) | $1,600-$2,000 |
| Video intercom (residential gate) | $1,500-$2,800 |
| Video intercom (commercial/multi-camera) | $2,200-$4,500 |
| Hinge re-anchoring into brick pillar (per pillar) | $150-$350 |
| Ground loop repair / vehicle detector re-tune | $200-$450 |
Every quote is given up front and in writing. The price we hand you is the price you pay, and it’s agreed before any work starts. No trip charge inside Macomb County, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. If you’ve got a written estimate from another company, bring it to us for a free second opinion. Call (877) 610-2993 for an exact number.
Serving Mount Clemens - and the Special Cases That Come With It
Mount Clemens isn’t a postwar suburb. It’s a county seat with Victorian houses, foursquare homes, Craftsman bungalows, and original ornamental iron gates that have been opening and closing for a century. The residential core between the 1890s and the 1930s produced gate work unlike anything you’ll find in the newer subdivisions of Warren or Sterling Heights. On Mount Clemens’s century-old blocks, gate access control is dominated by original ornamental iron gates mounted on un-repointed brick pillars, and the top call is a hinge anchor that has torn out of deteriorated mortar. A technician who only works newer tubular steel panels might never see that failure in a decade.
We restored a Victorian-era swing gate on a shared driveway off North Avenue near the Clinton River. The LiftMaster keypad entry had to be re-mounted onto a crumbling brick pillar without disturbing the original cast-iron strap hinges. Our crew re-anchored the hinge post with a deep-set threaded rod and epoxy, repointed the surrounding mortar, then re-calibrated the operator’s rack and pinion to work with the freshly squared post. All of it happened while the driveway stayed passable, because the tenants’ cars had to keep moving. That’s the kind of job you can’t learn from a catalog.
The single most common failure mode across Mount Clemens’s historic core is a hinge anchor pulled clean out of a pillar face. Many of these pillars are original century-old masonry that has never been repointed. The anchor holds the gate leaf. The gate leaf holds the keypad. When the anchor fails, everything on the gate looks broken. Fix the anchor, and the access control starts working again. In riverside 48043, where the Clinton River’s moisture pushes frost heave into low-lying soils, ground-loop detectors misread constantly in spring. The wire shifts, the system stops sensing cars, and the gate sits there looking stupid while the tenant honks. We fix that too. This is what Gate Access Control in Mount Clemens means day to day: repair work on century-old masonry, electronics mounted on surfaces that move, and access systems that have to work on shared driveways where a neighbor’s car is never more than ten feet away.
We Also Serve Cities Near Mount Clemens
If you’re in Mount Clemens proper, in 48043 or 48046, or just outside, we’re already nearby. We serve Clinton Township, Fraser, Saint Clair Shores, and Roseville with the same live-answer phone line and the same 90-Day Done Right Promise. Scheduling is coordinated from our Detroit office, but the crews working your gate are Mount Clemens local. Call (877) 610-2993 and we’ll tell you when the truck can be at your gate.
Serving Mount Clemens, MI - Our Local Coverage Area
We’re based in the Mount Clemens area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Mount Clemens
Because the failure is rarely the access control itself. In Mount Clemens’s older core, the problem is almost always an un-repointed brick or stone pillar that’s absorbed a century of moisture and freeze-thaw cycles. The mortar crumbles, the hinge anchor loses its grip, and the gate sags just enough that the keypad, card reader, or operator misreads. Fix the anchor, repoint the mortar, and the electronics settle down. Call (877) 610-2993 and we’ll look at the pillar before we quote you a single new part.
Yes. We do it without drilling through ornamental iron. The keypad mounts to the brick pillar, not the gate leaf, and the operator’s control wiring runs along the outside of the original iron using inconspicuous standoffs and saddles. We’ve done it on shared driveways off North Avenue where the gate had been in place since the 1910s and the homeowner wanted nothing about the original iron changed. A keypad entry install on that kind of gate runs $350 to $700 in Mount Clemens. (877) 610-2993 for a free on-site look.
Because the ground moves. Riverside sections of 48043 get genuine frost heave as wet soils freeze and expand over 40-plus cycles each winter. The buried loop wire shifts, the loop’s inductance changes, and the vehicle detector no longer senses cars. We repair and re-tune ground loops, and for properties that flood repeatedly, we’ll talk about converting to a photo-eye or radar-based detector that doesn’t live in the dirt. Get in front of it before the spring thaw. Call (877) 610-2993.
It can be. The downtown courthouse district has heavy ornamental iron fencing in various states of deferred maintenance, and when a slide gate’s track settles even half an inch, the gate car moves out of plane and the photocell’s beam gets broken at random. Add Mount Clemens’s 40-plus freeze-thaw cycles and the track settles every year. We check the track, the rollers, the beam alignment, and the operator’s safety edge wiring before we replace any electronics. A BFT slide gate troubleshooting visit in Mount Clemens runs $100 to $250, and the $40-off-over-$200 repair offer applies. Call (877) 610-2993.
We work around the gate, not through it. For an occupied rental on a shared driveway, we prop and brace the gate leaf, dig out the failed mortar in sections, set new anchors, and repoint only what needs repointing in one visit. The driveway stays passable the whole time. We’ve done it on multi-family properties near the courthouse where tenants’ cars were coming and going every ten minutes. The access control stays powered and functional while we do the masonry work. Call (877) 610-2993 and ask Hal how he’d stage it.
Call Gatewood Fence & Gate for Gate Access Control in Mount Clemens, MI
Hal Gatewood’s name is on the shop, his address is published, and his cell number is on every invoice. We’ve been locally owned and owner-operated since 2001, and we repair what other companies want to replace. If your gate access control is failing on a century-old pillar, a shared driveway, or a commercial lot near the courthouse, call (877) 610-2993 for a free estimate. A live person answers. Day or night.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mount Clemens since 2001.





Before
After
Before
After
Before
After