Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Mooresville
If your gate is sagging, grinding, or refusing to open in Mooresville, NC, you want it fixed today, not after a week of phone tag. Most gate repairs in this area, from The Point to neighborhoods off Brawley School Road, cost between $180 and $650, and we do most jobs in a single visit. Gatewood Fence & Gate has been serving Lake Norman and the surrounding area since 2001, with a live person answering the phone at (877) 610-2993 any hour of the day or night. Hal Gatewood owns and runs this company, and his name is on every invoice, not hidden behind a holding company.
Why Gatewood Fence & Gate Is Mooresville’s Preferred Gate Repair Team
We work on Gate Repair jobs up and down Highway 150 and around Lake Norman every week, so our crew knows what Mooresville gates have to endure. Hal started this company in 2001 as a fencing and gate outfit, and the business is still owner-operated. When you call, you will talk to a live person who actually knows gates, not a call tree in another state. Hal lives his work with a simple rule: fix the gate in the driveway, not in some distant shop. If a hinge post is bad, he cuts it out on site and welds in a new one. If a motor is worth rebuilding, he rebuilds it instead of selling you a full replacement. His 90-Day Done Right Promise is printed on every job, and if something is not right, one call brings him back.
For Mooresville homeowners, that means after a storm whips off Lake Norman, after an ice event locks up a slide gate track, or after a teenager backs into the pillar in the dark, there is someone accountable with a local shop and a face you will see around town. We do not dispatch crews from a call center. Scheduling dates and logistics come through our Charlotte office, but the person who shows up to your gate in Mooresville is a Gatewood technician, background-checked and uniformed. We know which operators the HOA board in Brawley School Road neighborhoods prefers because we service them every month.
Our Gate Repair Services in Mooresville
Electric Gate Repair
Most electric gates we see in Mooresville are operator and control board failures, often from gates installed during the 2000s building boom on Lake Norman. Those early systems are at the 15-to-20-year mark now, and their boards fail without warning. A typical electric gate control board replacement in Mooresville runs $250 to $540, including the board and field wiring cleanup. We work on FAAC, BFT, Linear, and Viking operators, among others, and we keep common boards and safety edges on our trucks so most electric gate repairs in Mooresville happen same day.
Automatic Gate Repair
An automatic gate combines a motor, a control board, loop detectors, safety sensors, and remote receivers. When any one of those pieces fails, the whole system shuts down. Common automatic gate repair jobs in Mooresville include burned out actuator arms on swing gates, failed loop detectors at community entrances, and remotes that stopped working after a lightning storm. Most automatic gate repairs in Mooresville are $275 to $650. We will replace only the failed part, not a full package, and we show you the bad part when we do.
Hinge & Post Repair
This is the big one for Mooresville. Nearly every custom ornamental iron gate around Lake Norman is supported by hinge posts set inside brick or stone pillars, and in 28117 especially, lake-moisture wicking rots the steel inside the cladding long before anything looks wrong. We see it in The Point, in older waterfront sections near Brawley School Road, and on estates with heavy swing gates. Repairing a hinge post in Mooresville usually costs $400 to $900 depending on access, what the pillar is clad in, and whether we can reuse the existing gate or need to cut and rehang it. Hal does the welding on-site, and a sag in the hinge post means the gate gets fixed, not just the panel.
Gate Realignment
A gate that scrapes the ground or refuses to latch properly is often misaligned, either from a leaning post, loose hinge bolts, or a shift in the driveway after heavy rains. Realignment is usually a faster and cheaper fix than most people expect: $150 to $300 for a standard single-swing gate in Mooresville, provided the hinge posts are still sound. We bring the gate back to true, check all hinge points, lubricate what needs lubrication, and adjust the closing force on the operator so the gate closes cleanly without slamming.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mooresville
Hal is certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking, which cover most of the operators installed around Lake Norman and Mooresville. We stock the service parts that fail most often for those brands, which is why we can repair many Mooresville gates on the first visit. If a certain part is not on the truck, we can usually have it within a day or two for scheduled appointments. Our parts orders are based on what we actually see in this area, so long backorders are rare.
Common Gate Repair Problems We See in Mooresville Homes
- Humidity and oxidation at welded joints. Moist air off Lake Norman is unkind to ornamental iron, especially at the welded joints, hinge pins, and bottom rail contact points. Gates start to bind, and that binding strains the operator. Left alone, the motor burns out while the hinge keeps corroding.
- Ice events that freeze slide gate tracks. Mooresville sits slightly inland and higher than Charlotte, so in winter it catches ice events that lower towns miss. Freezing rain gets into slide tracks, jams the rollers, and snaps hydraulic actuator arms on swing gates. We see a run of these calls every cold snap in 28117.
- Outdated control boards on 2000s-era community entrances. A lot of the gate systems around The Point and other lakefront communities were installed in the 2000s, when boards had simpler logic and fewer graceful failures. When one fails, the whole neighborhood entrance goes down. These are often repair-priorities because dozens of houses share one gate.
- Sensor and loop detector failures. Failed loop detectors let gates close on cars, and failed safety photocells do the same. In Mooresville, these parts get knocked around by storms and age, and many are original to 15-year-old installs. We replace the component, not the whole operator.
Pricing for Gate Repair in Mooresville, NC
Expect a gate repair visit in Mooresville to run between $180 and $850, with most common failures falling between $275 and $500. Hinge post repairs that require cutting concrete or pulling stone cladding land at the top of that range; simple realignment and roller replacement lands at the bottom. Here is what we typically see in Mooresville:
- Hinge and post repair: $400 to $900
- Electric gate control board replacement: $250 to $540
- Automatic gate operator repair: $275 to $650
- Gate realignment: $150 to $300
- Weld or rust repair on ornamental iron: $120 to $400
Every price is quoted and agreed before work begins. We do not show up and add surprise line items, and we do not charge a trip fee inside the county. Mooresville customers also get $40 off any repair over $200, a free second opinion on any written estimate, and a standing 10% discount for seniors and veterans. If you have a written number from another company, bring it, and Hal will look at it straight.
We Also Serve Cities Near Mooresville
If you are just outside Mooresville, we also run crews to Davidson, Lake Norman of Catawba, Cornelius, and Huntersville. This matters because a gate problem in one of these towns is not a surprise to us. For a full look at the area we cover, see Gate Repair in Mooresville and the surrounding communities. If you are in one of those towns and need someone who knows the terrain and the inventory of gates installed here, call the same number.
Serving Mooresville, NC - Our Local Coverage Area
We’re based in the Mooresville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Mooresville
Because the air off Lake Norman is persistently moist, especially in the morning and evening, and that moisture reaches into welded joints, hinge pins, and the bottom rails before it ever touches the big flat surfaces. In Mooresville, we see oxidation at the hinge knuckles on gates as young as eight years old. Chromed and painted surfaces hold up; raw or scratched weld points do not. The best defense is annual inspection and touch-up paint at any bare metal spots.
Yes, and that is the normal path. Most The Point gate failures are confined to one component: a failed loop detector, a dead control board, a broken actuator on one side, or a corroded hinge on one leaf. Replacing the entire operator is rarely necessary, and Hal prefers to repair the failing piece and recalibrate the rest. If the operator is genuinely obsolete, we will tell you straight and give you the option, but we do not start there. Call (877) 610-2993 and we will come assess it.
Entrapment protection should be tested monthly, or at least quarterly, using the standard two-inch test: place a solid object like a two-inch block in the gate’s path and see whether the gate reverses on contact and whether the photocells detect it. In Mooresville, the busy hoa and commercial gates on multi-user properties should be tested and documented more often, since liability is higher. We can set up a recurring service schedule, but the core answer is monthly for residential gates. If your safety edge is cracked, call us before the board starts throwing false fault codes.
Mooresville sits slightly higher than Charlotte and gets hit with ice events that the city below does not. Freezing rain collects in the lower track of a slide gate, then hardens, and the gate either will not move or it snaps a shear pin trying. In 28117 around the lake, the effect is worse because the temperature drops hard at night over the water. We clear the track, thaw and dry it, inspect the rollers and the operator gear, and if the operator was strained, we check the arm and couplings before you run it again.
Yes. Underground operators for custom swing gates are a specialty we handle regularly in Mooresville, and they failed more often around Lake Norman than most installers care to admit. Water ingression and poor drainage are the usual killers. We pull the box and hydraulic unit, inspect the seals, replace what failed, improve the drainage if the install allows, and rehang the gate. For a high-end ornamental gate on a stone pillar, this is not a first-time job for a generalist; it is a job for someone who has done dozens of them.
If you are in Mooresville, North Carolina, and your gate is half-open, noisy, or dead in the driveway, call us. We answer the phone around the clock at (877) 610-2993, and the estimate is free. Whether you are in a family home off Talbert Road, a lakefront property in The Point, or a gated estate with an underground operator, the person who shows up works for Hal, not for a franchise. If we say a price, that is the price. And the 90-Day Done Right Promise means we stand behind the work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mooresville since 2001.