Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Lochbuie
Gate repair in Lochbuie usually costs between $180 and $650, and the job that fixes it is usually not the job you called about. Most of the gates we see dragging in this town were installed by production builders who set 4-inch posts in shallow concrete and called it done. Two seasons of Weld County wind later, the post rocks, the gate binds, and an operator burns out trying to move steel that doesn’t line up anymore. We’re Gatewood Fence & Gate, locally owned and owner-operated since 2001, and we fix gates in Lochbuie properly: welded on site, footings re-poured when they need it, parts replaced only when they’re actually worn out. Call us at (877) 610-2993 and a live person answers, any hour, any day.
Hal Gatewood’s name is on the shop, his address is published, and his license number is something anyone can look up. He’s been at this since 2001, which means he’s not passing through. When a gate in Lochbuie needs work, the person who shows up is someone who will see you again at the hardware store.
Why Gatewood Fence & Gate Is Lochbuie’s Preferred Gate Repair Company
We’ve been working on Gate Repair jobs across Weld County for over 29 years, and Lochbuie has a pattern all its own. The town sits on unshielded high plains, and the wind here does things to gates that don’t happen in sheltered Front Range suburbs. A gate that lasted ten years in Northglenn can rack its post in two seasons in Lochbuie because there’s nothing between the prairie and your driveway to break the gusts. We know that before we show up, which means we check the footing before we touch the hinge.
The 90-Day Done Right Promise comes in writing on every job we do in Lochbuie. If it’s not right, Hal comes back. No runaround, no dispatch queue, no “let me open a ticket.” Calls are answered by a live person around the clock. That matters when an electric gate is stuck open at midnight and the wind is pushing snow across County Road 4.
We also carry the shops most relevant credential for this town: certified service on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you’re not sure what brand is in your gate, describe it over the phone. We’ll know within a sentence or two.
Our Gate Repair Services in Lochbuie
Hinge & Post Repair
In Lochbuie, the hinge is rarely the problem on its own. A gate sags in the hinge post, not in the middle, and here the hinge post has usually been fighting 60-plus mph Chinook gusts since the day it was set. We cut away the failed concrete, set the post deeper, and weld or bolt the hinge assembly back square. If the post is salvageable, we true it; if it’s not, we tell you plainly before we cut anything.
Gate Realignment
The open prairie east of Lochbuie channels wind through every gap in your fence line, and over time that pushes even properly built gates out of plane. A gate that drags at the latch side or won’t seat the close sensor is usually telling you the frame has racked, not that the operator is weak. We realign the frame, re-set the hinges, and adjust the operator limits so the gate closes fully without driving the motor past its rated load.
Weld & Rust Repair
Lochbuie’s groundwater is hard and alkaline, which chews through iron gates at the weld points and hardware fittings faster than you’d expect from a semi-arid climate. We provide our Gate Parts & Welding in Lochbuie on site so the gate stays in your driveway, grind back the rust, and coat the repair to match the original finish. If the rust has eaten the post base, we don’t paint over it; we cut in a new section.
Electric Gate Repair
Most electric gate failures in Lochbuie start as mechanical problems. The operator burns out a capacitor, strips a gear, or trips repeatedly because the gate can’t move properly. We fix both sides: the gate that moves and our Gate Motor & Opener in Lochbuie that moves it. That’s the difference between a repair that holds through next wind season and one you’re calling about again in April.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lochbuie
We’re certified on nine major gate brands, and the ones we see most in Lochbuie’s HOA communities are LiftMaster, Ghost Controls, Linear, DoorKing, and Viking. We keep common replacement parts stocked so a repair doesn’t turn into a two-week wait for a backordered PCB from a warehouse. If your automatic gate operator is an older Viking or a builder-standard LiftMaster, chances are we have the part on the truck or can have it in hand by the next business day. Gate Repair in Lochbuie from a shop that actually knows which systems the production builders installed and which ones the HOAs now mandate.
Common Gate Repair Problems We See in Lochbuie Homes
- Wind-racked posts with shallow concrete footings. Lochbuie’s exposure on the unshielded plains means sustained wind loads push posts over; a re-pour beats a hinge adjustment because you’re fixing what failed, not what bent.
- Sprung hinges and binding gates in HOA subdivisions. Production-built communities went up fast with minimum-spec post embedment; the wind loads they face now are the same ones farmers in this county have been fighting for a century.
- Rust at weld points and hardware fittings. The alkali in Lochbuie’s groundwater accelerates corrosion, especially where posts meet concrete. Caught early, we cut it out; caught late, it’s a post replacement.
- Automatic gate operators that won’t hold their limits. If the gate binds from a racked hinge or a shifted post, the operator’s sensors read that resistance as an obstruction and the gate reverses. We realign the gate before we recalibrate the operator.
Pricing for Gate Repair in Lochbuie, CO
You should know the ranges before you call. A hinge and post repair in Lochbuie typically runs $300-$650, depending on whether the footing needs a re-pour and how deep we have to chase the rust. Gate realignment alone is usually $180-$400. Electric gate repair including the operator runs $250-$600 for a capacitor, limit switch, or control board; burned-out motors push the job north of $700 if the gate itself was binding and caused the damage. Weld and rust repair runs $150-$450 depending on the extent of the repair and finish matching. Every estimate is written, quoted, and agreed before any work starts. We don’t show up with a different number than the one we gave you. Seniors and veterans permanently get 10% off any repair, and any repair over $200 comes with $40 off. No trip charge inside the county.
Your HOA and Gate Repair in Lochbuie
Most of Lochbuie’s housing stock is post-2000 tract construction in HOA-governed communities that mandate specific gate styles, heights, and finishes. That’s not a small detail; it’s the first thing you should check before anyone touches your gate. In the newer subdivisions off Weld County Road 8, builder-installed ornamental iron driveway gates frequently used 4-inch posts set in minimal concrete. After a season or two of prairie wind loading, the post rocks visibly and the gate drags. We know that means a footing re-pour job, not a simple hinge adjustment, and we’ll tell you that before we send a quote. If your community board needs a repair spec or material match, we’ll help you write it up so you’re not the one going back and forth with the management company. We also handle Gate Access Control in Lochbuie systems when those are part of your HOA’s security requirements. Gatewood Fence & Gate has worked with HOA boards throughout Weld County, and we know what passes review and what gets flagged.
If your management company requires matching builder-grade ornamental iron or vinyl, we don’t substitute and hope for the best. We call the manager, confirm the spec, and do it right the first time. That spares you the second round of approvals.
Serving Lochbuie, CO - Our Local Coverage Area
We’re based in the Lochbuie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Lochbuie
Yes, most Lochbuie HOAs require architectural or design committee approval for gate repairs that change the gate’s appearance, material, or footprint, and many require notice for even a like-for-like repair. The safest path is to check your community’s design guidelines before scheduling, especially if the repair involves replacing a post, changing a gate’s hardware finish, or installing a new operator that isn’t pre-approved. We can provide spec sheets, material details, and a repair description for the committee. Then call (877) 610-2993 and we’ll schedule the work once approval is in hand.
In Lochbuie, a gate that drags after every wind event is usually telling you the post footing failed, not that the gate needs a hinge adjustment. Production builders in the area’s newer subdivisions set 4-inch posts in concrete that’s too shallow for the sustained wind loads on the open plains. The wind rocks the post, the concrete loses its grip, and the hinge side drops. We re-pour the footing to a deeper depth, reset the post, and realign the gate, which addresses the cause instead of just bending it back into position. Call us at (877) 610-2993 for a free estimate to look at your gate.
That’s usually a safety sensor doing its job; the gate detects resistance or a broken sensor beam and refuses to close to avoid hitting a car or person. But in Lochbuie, the resistance is often mechanical: a racked hinge post, a bent gate frame from wind load, or a rusted hinge binding. Start by checking for a dirty or misaligned sensor, then watch the gate move; if it stutters or strains, the slide system itself is likely out of alignment. We fix both the sensor system and the mechanical cause. For an exact diagnosis, call (877) 610-2993.
Yes, if we know what the standard requires. Builder-installed vinyl gates in Lochbuie are usually white or almond picket-style panels with matching vinyl posts and stainless steel or aluminum hardware. We repair them with like-for-like material and hardware so the gate matches your HOA’s architectural standard. That means matching the post cap style, the picket spacing, and the hinge finish, and we’ll document it for the management company if they ask. Call (877) 610-2993 for a free estimate.
You’ll usually see the post itself moving, not just the gate. Give the hinge post a solid shove near the base; if it flexes, shifts in the soil, or the concrete collar around it has cracked and lifted, the footing has failed and re-setting hinges won’t last. In Lochbuie’s wind-exposed conditions, a gate that drags after every significant wind event is the first sign. We check the post for plumb and the concrete for integrity before recommending a hinge adjustment; a rocking post is a re-pour job. Call (877) 610-2993 and we’ll tell you what yours needs.
We Also Serve Cities Near Lochbuie
Gate Repair from the same local crew that works Lochbuie is available in the towns surrounding Weld County’s southern growth edge, including Brighton, Derby, Fort Lupton, and Northglenn. If you’re in one of those communities and your gate is dragging, sticking, or no longer closing on its own, Lochbuie is where a lot of our wind-tested repair work has taught us what fails and why.
Call Gatewood Fence & Gate for Lochbuie Gate Repair
If your gate is sticking, dragging, or won’t close, call (877) 610-2993 and talk to the person who will show up. Hal Gatewood’s name is on the shop and on every invoice, and the 90-Day Done Right Promise is in writing. No trip charge inside Weld County, no number at the door that doesn’t match the quote, and no gate dragged out of your driveway to be welded somewhere else. We weld on site, we fix what’s actually broken, and we stand behind it. Get a free estimate today.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lochbuie since 2001.