Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lochbuie
Most gate failures in Lochbuie come down to one thing: wind. Not hinges wearing out from age, not panels sagging on their own. Wind loading against a post that was set shallow by a production builder. We replace hinge posts, weld broken rails, and fix gates at the source of the problem so they stay put through the next 60 mph Chinook. If you’re in Lochbuie and your gate drags, binds, or leans, call (877) 610-2993. Hal Gatewood’s crew handles the repair in your driveway, on site, without hauling your gate off to some shop.
Why Gatewood Fence & Gate Is Lochbuie’s Preferred Gate Parts & Welding Company
Lochbuie is a small town, and word travels fast here. When we fix a gate on Spruce Street or in the newer subdivisions south of Highway 52, neighbors notice. That’s how we’ve built our reputation in 80603: show up on time, weld it right, stand behind it. Hal Gatewood’s name is on the shop and on every invoice, and his phone answers with a live person 24 hours a day. Not a voicemail. Not a call center three states away.
We’ve worked on enough builder-installed ornamental iron gates in Lochbuie’s post-2000 subdivisions to know exactly what fails and why. The home looks new. The gate looks fine. But two seasons of prairie wind later, the post is rocking and the gate drags across the driveway. A company that only swaps hinges will leave you calling again next spring. We fix the footing, the post, and the hinge as one job, because that’s how the wind treats it.
Every job we do in Lochbuie carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround. No fine print. We also offer a free second opinion on any written estimate you’ve gotten from another company, and we don’t charge a trip fee inside the county.
Our Gate Parts & Welding Services in Lochbuie
We repair gates in place whenever possible. Our Gate Parts & Welding crew carries a full welding rig, so most repairs happen right in your driveway. Here’s what we handle most often for Lochbuie homeowners.
Hinge Replacement
Wind-racked hinges are the most common call we get in Lochbuie. When a production-built ornamental iron gate has hinges bolted to a 4-inch post with minimal embedment, the hinge becomes the weak point the wind works against. We cut off the old hinge, grind the post face clean, and weld on a heavier-gauge replacement rated for the gate’s actual weight. The repair is done on site, and the gate never leaves your property.
Post Replacement
In Antelope Hills, we replaced a wind-racked ornamental iron swing gate on a 2022 ranch-style home where the 4-inch hinge post had leaned over 3 inches from repeated 60+ mph Chinook gusts. Our crew pulled the failed post, found only a 12-inch concrete footing, and re-poured a 30-inch bell-bottomed footing before welding a new hinge post and re-hanging the gate with a LiftMaster LA400 operator, then confirmed the safety photocell alignment so the HOA would sign off. That’s the post replacement job done correctly in Lochbuie. A sagging gate is misdiagnosed as a panel issue when the real problem is the hinge post footing. Panel-only repairs fail within months because the wind keeps levering the post. We start with the post.
Rail Repair
Ornamental iron rails on Lochbuie driveway gates take a beating from the region’s hard, alkaline groundwater. Water wicks into the tight builder-grade weld joints, and rust forms from the inside out. We cut out the failed section, weld in matching rail stock, and treat the joint so it doesn’t become the next failure point. If it’s relatively new builder-grade iron, matching the original profile matters, especially when an HOA architectural committee is reviewing the repair.
Custom Welding
Sometimes the right fix is a fabricated part, not an off-the-shelf one. We weld custom brackets, hinge plates, latch mounts, and gate frame reinforcements on site. Whether it’s a ranch-panel gate on an older lot on the town’s edge or an ornamental iron gate in a newer subdivision, we match the material and the finish so the repair doesn’t look like a patch job. For HOA-governed communities, that matters.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lochbuie
We stock parts and service opener systems from the brands most common across Weld County: LiftMaster, Viking, Ghost Controls, DoorKing, Elite, FAAC, BFT, Linear, and Mighty Mule. For slide gates that jump track in a wind gust, we service the rack and pinion systems on Viking and DoorKing operators regularly. If your gate operator was installed by the builder, there’s a good chance it’s a LiftMaster or Mighty Mule unit, and we know how those hold up under Lochbuie’s wind pattern. For heavier commercial-style slide gates on larger lots, Elite and Viking units are common, and we carry the common wear parts for those too.
Common Gate Parts & Welding Problems We See in Lochbuie Homes
- Hinge posts rocking loose in shallow builder concrete. Lochbuie’s newest subdivisions on the western growth edge have builder-installed ornamental iron driveway gates with 4-inch posts set in minimal concrete. After a season or two of prairie wind loading, the hinge post rocks visibly and the gate drags. That’s a footing re-pour job, not a simple hinge adjustment.
- Weld points rusting through faster than expected. Lochbuie’s hard, alkaline irrigation water wicks into tight builder-grade weld joints and accelerates corrosion from the inside. By the time you see rust staining, the weld is often compromised. We cut out the bad joint and weld in fresh material treated for the local water chemistry.
- Sagging gates misdiagnosed as panel problems. A gate sags in the hinge post, not in the middle. If someone adjusts the hinges and declares it fixed, the post is still loose underground and the gate will sag again. The repair starts at the footing.
- Slide gates jumping the track during high wind events. Unshielded Weld County wind catches a slide gate’s broad face and can lift or twist it off the track if the roller assembly or rack is worn. This is more acute in Lochbuie than in a sheltered Denver suburb. We align the track, replace worn rollers, and check the rack and pinion mesh.
Pricing for Gate Parts & Welding in Lochbuie, CO
A typical hinge replacement on a residential swing gate in Lochbuie runs $180 to $340 depending on the hinge size and whether we need to weld a reinforcement plate to the post face. Post replacement, including removing the failed post, re-pouring a proper footing, and re-hanging the gate, runs $450 to $900 depending on post diameter, gate weight, and whether an opener needs to be re-aligned afterward. Rail repair and section welding typically run $120 to $300 per rail section, plus materials if matching ornamental iron stock needs to be special-ordered. Custom bracket or latch fabrication starts around $150. Every job gets a written price before we start, so there’s no surprise at the end. We also take $40 off any repair over $200, and seniors and veterans get a permanent 10% discount.
Call (877) 610-2993 for an exact quote. Estimates are free, and if you already have a written estimate from another company, we’ll give you a free second opinion.
We Also Serve Cities Near Lochbuie
While this page is for Lochbuie homeowners and HOAs, our crews regularly serve the surrounding area too. If you’re in Brighton, Derby, Fort Lupton, or Northglenn and need gate parts or welding work, call the same number. We bring the same on-site welding rig and the same 90-Day Done Right Promise to every job.
Serving Lochbuie, CO - Our Local Coverage Area
We’re based in the Lochbuie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lochbuie
Because the hinge post is moving in the ground, not the hinge itself. In Lochbuie’s post-2000 subdivisions, builder-installed gate posts were often set in 12 to 18 inches of concrete, which is not enough for a 4-inch post holding a gate exposed to sustained prairie wind. Every gust levers the post a little more, and the gate drags. A hinge adjustment masks it for a few weeks. The fix is pulling the post, re-pouring a deeper footing, and re-hanging the gate. Call (877) 610-2993 if the sag keeps coming back.
Most likely yes. Many of Lochbuie’s newer subdivisions are HOA-governed, and the architectural guidelines spell out gate style, height, and finish. A repair that keeps the original gate profile and finish usually sails through, but a visible patch or mismatched rail can get flagged. We match builder-grade ornamental iron and Vinyl profiles so the repair passes review, and we can coordinate with your management company if they need documentation. Call (877) 610-2993 to talk through what your HOA requires.
Yes. Lochbuie’s tract subdivisions tend to use a limited range of ornamental iron profiles, and we stock the common ones and can source the rest. Matching the material preserves the gate’s appearance and keeps HOA approval straightforward. We treat the weld joints for the local hard water so the repair doesn’t rust ahead of the original material. Call (877) 610-2993 and we’ll match the profile on your gate.
Yes, automatic gate operators in residential settings are required to have photo-eyes or edge sensors that detect obstructions and reverse the gate. This matters in Lochbuie because wind gusts can push the gate off track, and if the safety sensors are misaligned or disabled, the operator won’t reverse when it meets resistance. A gate that closes against a wind-twisted track can damage the operator, the rack, or a vehicle. We check and align safety sensors on every opener we service. Call (877) 610-2993 if your gate operator isn’t reversing properly.
It can be, yes. A slide gate that jumps track during a wind event usually has worn rollers, a misaligned track, or a rack and pinion mesh that’s out of spec. Wind catches the gate’s face and twists it, and if the rollers are worn or the rack has play, the gate climbs the track. In Lochbuie’s exposed setting, this is a common failure mode on Viking and DoorKing slide operators. We inspect the track, alignment, rollers, and rack mesh, then repair the whole assembly so the gate rides true. Call (877) 610-2993 and we’ll take a look.
Call Gatewood Fence & Gate for Gate Parts & Welding in Lochbuie
If your gate is leaning, dragging, or rusted through at the weld, call (877) 610-2993. We’ll give you a straight answer about what’s wrong and what it costs to fix, and the price is written before any work starts. We’re the local, owner-operated Gate Parts & Welding in Lochbuie team that repairs what other companies would replace. No trip charge inside the county. $40 off any repair over $200. And if it’s not done right, Hal comes back. That’s the promise, in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lochbuie and the surrounding Weld County communities since 2001.