Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Lenoir City
Gate repair in Lenoir City usually falls into one of two camps: a gate that won’t open, or a gate that won’t stay where it belongs. We handle both, and we handle them fast. If you’re in the 37771 or 37772 ZIP and your gate is dragging, stuck, or dead, call (877) 610-2993. A live person answers, and we’ll get someone headed your way. Hal Gatewood has been fixing gates since 2001, and the shop is down the road, not three states away.
Why Gatewood Fence & Gate Is Lenoir City’s Preferred Gate Repair Company
We’re not a franchise. Hal Gatewood’s name is on the shop and on every invoice, which means the person who quotes your gate repair in Lenoir City is the same person who stands behind it. That’s not a corporate slogan. It’s how a small business works when the owner still picks up the phone.
People in Lenoir City call us because we actually show up in the window we promised. When a gate fails on a Friday afternoon before a holiday weekend, you don’t want to wait until Tuesday for a callback. Our Gate Repair service runs on one rule: answer the phone, give a straight price, and get the gate working. We’re certified to service nine major brands including Viking, Ghost Controls, DoorKing, and Elite, and we stock common parts for those systems so we’re not waiting on a shipment while your driveway sits open.
We also know the specific ways gates fail around Fort Loudoun Lake. That matters more than most people realize. More on that below.
Our Gate Repair Services in Lenoir City
Electric Gate Repair
Electric gates in Lenoir City die for predictable reasons. The most common one around here is condensation inside the operator enclosure. We’ll get into why that happens so much near the lake in a minute, but the short version is that sealed enclosures rated for coastal humidity are the only real fix in waterfront neighborhoods. We carry NEMA 4-rated boxes on the truck for exactly this reason.
A typical electric gate repair in Lenoir City runs $160-$420 depending on whether we’re replacing a control board, a limit switch, or the operator’s capacitor. The price is quoted and agreed before any work starts.

Automatic Gate Repair
Automatic gate operators work hard around Lenoir City because so many HOA subdivisions built in the 1990s and 2000s included them as standard. A LiftMaster or Viking swing arm that sounds like it’s grinding may just need a gear adjustment and fresh grease, but if the arm is binding, that’s often a hinge or post issue masquerading as a motor issue. Fix the panel without the post and you’ll fix it twice.
We repair operators for all nine brands we’re certified on, including the Ghost Controls systems common on newer aluminum drive gates in lakefront developments off Highway 321.

Hinge & Post Repair
Here’s the thing about sagging gates in Lenoir City: the problem is almost never the panel. A gate sags in the hinge post, not in the middle, and that’s where we start. Lake humidity rusts hinge pins. It swells the wood posts on older legacy lots near the downtown core. Either way, the gate drops, scrapes the driveway, and stops latching.
We reset posts in concrete where the footing has shifted, replace rusted hinge hardware with sealed-bearing hinges, and weld cracked mounts back square. In most Lenoir City neighborhoods, hinge and post repair runs $180-$500. Some of that depends on whether we’re working with an aluminum frame or a heavier ornamental iron gate like the ones common in newer lakefront subdivisions.

Gate Realignment
A gate that drags on the driveway or won’t close flush against the latch post isn’t always bent. Often the post has moved, or the gate’s weight has pulled the operator arm out of its travel arc. We realign gates by first making the posts square, then adjusting the hinges, then resetting the operator limits so the gate closes cleanly without slamming or reversing.
Gate realignment in Lenoir City typically costs $120-$280 for a standard single swing gate. If we find a cracked weld or a damaged hinge during the job, we’ll show you the problem and quote the fix before we touch it.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lenoir City
We keep parts on the truck for the brands Lenoir City homeowners actually have. That includes Viking gate operators, which are popular in the lakefront subdivisions, plus DoorKing and Elite systems found in some of the older HOA entrances. We’re factory-certified to service nine major brands, and when we don’t have a part in the truck, our local supplier relationships in East Tennessee mean we get it faster than a national company waiting on a warehouse in another state.
Common Gate Repair Problems We See in Lenoir City Homes
Lenoir City’s location on Fort Loudoun Lake creates gate problems most inland towns don’t deal with. Here’s what we actually see when we roll up to a job:
- Condensation in operator enclosures. The nightly temperature drop off the lake pulls moisture into standard operator boxes. The control board corrodes, terminal strips go green, and the gate stops responding or operates intermittently. The fix that holds is a sealed NEMA 4 enclosure, which we recommend for every lakefront install.
- Rusted hinge pins and swollen wooden posts. Persistent humidity from the Tennessee River impoundment attacks hinge hardware year-round but gets much worse near the water. Older post-1990s subdivisions on the lake side of Highway 321 see this constantly. We replace with sealed, greaseable hinges and re-bed posts in concrete where needed.
- Ice-storm damage to operator arms and gate frames. The valley’s cold-air drainage makes Lenoir City prone to ice storms late in the winter. A quarter inch of ice on a 400-pound iron gate shears operator arms and bends frames. We see a repair spike every February and March.
- Obsolete control boards on older automatic gates. A lot of Lenoir City gates were hung in the late 1990s and early 2000s. Those original boards are long out of production. We can often retrofit a modern replacement to the existing operator, which saves the cost of replacing the whole unit.
Pricing for Gate Repair in Lenoir City, TN
We don’t play the game where the phone quote was $89 and the invoice is $590. The price Hal quotes is the price you pay, and it’s agreed before any work starts. Here’s what you can expect for common repairs in Lenoir City:
- Standard electric gate repair (limit switch, capacitor, wiring): $160-$420
- Automatic gate operator arm replacement or rebuild: $280-$650
- Hinge replacement with post re-anchoring: $180-$500
- Full gate realignment with operator limit reset: $120-$280
- Weld and rust repair on ornamental iron gates: $90-$350
Every quote is free. We offer $40 off any repair over $200, and there’s no trip charge inside the county. Seniors and veterans get a permanent 10% discount on every job. If you already have a written estimate from another company, bring it to us and we’ll give you a free second opinion.
We Also Serve Cities Near Lenoir City
We’re based here and we serve the whole area, not just Lenoir City. If you’re in Farragut, Alcoa, Maryville, or Eagleton Village and you need gate repair, the same crew that works Lenoir City will come to you. Same phone number, same pricing, same guarantee.
Serving Lenoir City, TN - Our Local Coverage Area
We’re based in the Lenoir City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Lenoir City
Control boards fail because Fort Loudoun Lake creates condensation cycling inside operator enclosures. During the day the lake warms the air, and at night the temperature drops and pulls moisture into the operator box. The board corrodes and shorts out. The repair that lasts is a NEMA 4-rated sealed enclosure for the replacement board. A standard enclosure will fail the same way the old one did. Call (877) 610-2993 for an exact quote on a sealed retrofit.
It’s almost always the hinge post. The panel rarely bends; the post shifts in its footing, or the hinge pins rust and wear, and the gate drops. Fix the panel without the post and you’ll fix it twice. We reset the post in concrete, replace the hinge hardware, and realign the gate so it closes clean. We’ll show you the specific problem before quoting anything.
Yes, in most cases we can. Many Lenoir City gates were installed before modern safety photocell requirements, but the operators can be retrofitted with current safety edges and photo eyes. This is worth doing even if the gate still works, because a gate that closes on a car or a grandchild is a serious liability. We’ll assess the existing system and tell you honestly what can be added without replacing the whole operator.
The gate jumps the rack because the rack gear, the drive sprocket, or the guide rollers have worn, and humidity accelerates that wear every spring and summer. We replace the worn rack section, adjust the sprocket engagement, and service the rollers so the gate tracks straight. On lakefront slide gates we also recommend sealing the sprocket enclosure against the same condensation that kills control boards.
When the post foundations are structurally failed and the operator is obsolete, replacement can cost less than repairing both systems. We never push replacement if repair is the honest answer, but if a rusted-out gate has already been welded twice and the operator is 20 years old, Hal will tell you plainly: the next repair is good money after bad. You’ll get a written price either way before anything is ordered.
Call Gatewood Fence & Gate for Gate Repair in Lenoir City
If your gate won’t open, won’t close, or sounds like it’s grinding itself to death, call (877) 610-2993. Hal or one of his crew will answer. You’ll get a straight answer, a free estimate, and a repair price that’s agreed before any work starts. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lenoir City and surrounding East Tennessee communities since 2001.





Before
After
Before
After
Before
After