Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lenoir City
If your gate is sagging, dragging on the driveway, or blowing control boards on Fort Loudoun Lake, you’re dealing with two forces that generic gate companies don’t plan for: humidity off the Tennessee River and HOA rules that govern every weld and hinge. Gatewood Fence & Gate has been fixing gates since 2001, and our Gate Parts & Welding team welds on site in Lenoir City driveways, not in some remote shop. Hal Gatewood’s name is on the invoice, and when you call (877) 610-2993, a live person answers. Not a queue. Not a chatbot. We’ll talk about your gate like the neighbor we are.
Key Takeaways
- Hinge post rot and rust at the base from lake humidity is the number one reason Lenoir City gates sag and drag.
- We weld on site in your driveway, avoiding haul-off delays and preserving your HOA’s approved gate style and finish.
- For lakefront communities, we specify NEMA 4-rated sealed operator enclosures. Standard boxes fill with condensation and kill control boards.
- Upfront pricing, quoted and agreed before any work starts. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Why Gatewood Fence & Gate Is Lenoir City’s Preferred Gate Parts & Welding Company
We’re not a franchise with a rotating crew. Hal Gatewood is local, owner-operated, and has been at this since 2001. The company has a published address and license number anyone can look up. That’s the point. When you call about a gate in Lenoir City, you get a person who knows the difference between a post footing shifted by lake moisture and a hinge that just needs grease.
Lenoir City homeowners keep our number handy because we show up when we say we will. Dispatch and scheduling for our local crew are coordinated from our Memphis office, but the person who arrives at your gate lives in East Tennessee, not three states over. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print.
We’ve repaired gates in Jackson Bend, near Highway 321, and throughout the 37771 and 37772 ZIP codes. You’ll see us at the hardware store. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in Lenoir City
Hinge Replacement
In Lenoir City, hinge pins rust faster than the gate itself. Lake humidity works into the pin and bushing, and within a few seasons the gate binds and screeches. We remove the old hinge, weld in a heavy-gauge replacement, and align the leaf so it swings without dragging. A hinge replacement in Lenoir City typically runs $180-$340 depending on gate weight and access. We quote before we touch a thing.
Post Replacement
A gate sags in the hinge post, not in the middle. That’s where we start. In Lenoir City’s older downtown sections, we see wood posts with rot at ground level. In newer HOA subdivisions along Fort Loudoun Lake, cast aluminum posts fail at the footing from years of moisture wicking. We dig, set a new post, and weld the hinge plates properly. Post replacement in Lenoir City generally runs $450-$900 depending on the post material and whether concrete cutting is involved.
Rail Repair
Bent rails happen. A teenager backs into the gate, an ice storm bends the top rail, or the gate simply wore its rail thin. We straighten what can be straightened and weld new rail stock where material is too fatigued. Fix the panel without the post and you’ll fix it twice. Rail repair in Lenoir City usually runs $150-$400 per rail, and we’ll match the existing profile so your HOA has nothing to complain about.
Custom Welding
Sometimes the part you need is not on a shelf. Ornamental iron gates in Lenoir City’s lakefront communities have curved top rails, scrollwork, and picket patterns that major manufacturers stopped producing ten years ago. Hal welds on site, in your driveway, matching the existing metal and finish. Custom welding in Lenoir City runs $95-$200 per hour plus materials, and we’ll give you a written number before the welder is lit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lenoir City
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Lenoir City, we see a lot of DoorKing and Viking operators on older HOA entrances and Linear and Ghost Controls on newer lakefront homes. When your operator fails, we can often repair the board rather than replace the whole unit. We keep common parts stocked and can source anything else quickly. If you’ve got a LiftMaster swing gate off Highway 321 or a Ghost Controls arm on a slope-facing lot in an HOA community, we know the failure patterns.
Common Gate Parts & Welding Problems We See in Lenoir City Homes
- Hinge post rot and rust at the base. Persistent lake humidity erodes post footings, causing gates to sag and drag on the driveway. This is the most common repair call we get in the 37772 ZIP code.
- Condensation inside standard operator enclosures. Lakefront communities on Fort Loudoun Lake see control board failures from nighttime temperature drops that draw moisture into the box. The fix is a sealed NEMA 4 enclosure, not another standard board.
- Late-winter ice storm damage. Cold air drains through the Tennessee River Valley, and exposed slope-facing gates in HOA communities take the worst of it. We straighten bent frames and replace sheared operator arms every February.
- Worn gate rollers on concrete driveway tracks. HOA-governed subdivisions in Lenoir City built between the 1990s and 2010s used rolling gates extensively. Rollers wear flat, the gate rattles, and then the motor burns out trying to move it. Replacing rollers early saves the operator.
Pricing for Gate Parts & Welding in Lenoir City, TN
Here’s what you can expect to pay for common gate work in Lenoir City. Hinge replacement runs $180-$340. Post replacement runs $450-$900. Rail repair runs $150-$400 per rail. Custom welding runs $95-$200 per hour plus materials. A full control board replacement with a sealed NEMA 4 enclosure in a lakefront community runs $350-$650 including weatherproofing. Every price is quoted and agreed before any work starts. Not an estimate that changes at the door. A written number. We don’t charge a trip fee inside the county, and standing offers apply: $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll tell you exactly what the work costs.
We Also Serve Cities Near Lenoir City
From our base serving Lenoir City and the Fort Loudoun Lake shoreline, we drive to Farragut, Alcoa, Maryville, and Eagleton Village for gate repairs and on-site welding. If you’re just outside the county line, call us anyway. If we can’t get there fast, we’ll tell you straight who can.
Serving Lenoir City, TN - Our Local Coverage Area
We’re based in the Lenoir City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lenoir City
Yes, in most Lenoir City HOA-governed subdivisions, any visible change to gate style, height, or finish requires architectural review, and even in-kind repairs sometimes need advance notice. We know the common CCR requirements in Lenoir City’s lakefront and commuter subdivisions, and we can provide spec sheets, material details, and finish samples so your application moves through on the first pass. Call us before you file, and we’ll help you get it right. For a written quote, call (877) 610-2993.
Because Fort Loudoun Lake is a 14,000-acre impoundment of the Tennessee River, and the lake surface pushes humidity into the air all year. Nighttime cooling draws that moisture into standard operator enclosures, which is exactly why control boards in Lenoir City’s lakefront communities fail two to three times faster than inland Knoxville gates. The durable fix is a NEMA 4-rated sealed enclosure with a desiccant pack, not another standard box. We stock them for Lenoir City jobs. Want a specific diagnosis? Call (877) 610-2993 and we’ll come look.
Yes, and that’s the standard way we work in Lenoir City. We brace the gate with adjustable stands, cut out the failed post or hinge assembly, set and anchor the new post, and weld the hinge plates back to the leaf in place. You keep your gate, your driveway stays put, and your HOA-approved style does not change. That’s the advantage of on-site welding. Call (877) 610-2993 to schedule a free measure and a written quote.
For ornamental iron gates in Lenoir City’s lakefront communities, we use MIG welding with ER70S-6 wire and then coat every weld with a zinc-rich primer. The primer is what matters. Bare welds near Fort Loudoun Lake start rusting within weeks, even indoors. After priming, we top-coat to match your existing finish so the repair disappears. If your gate is aluminum, we TIG weld it with the correct filler rod for the alloy. Let us match the metal before we light the torch. Call (877) 610-2993.
Yes, routinely. Lenoir City’s gated lakefront subdivisions and HOA communities often require the management company to sign off before any work starts at a shared entry or a resident’s gate. We coordinate directly with the property manager, provide the written scope and price, schedule the work around owner access hours, and send the invoice where the HOA wants it. If your community needs a gate service partner that already knows how Lenoir City HOAs operate, call (877) 610-2993 and ask for Hal.
Call Gatewood Fence & Gate in Lenoir City
Your gate is the first thing people see, and the first thing your HOA notices. If it’s dragging, rusting, or eating control boards, call (877) 610-2993 for a free estimate. Hal Gatewood has been fixing gates since 2001, the 90-Day Done Right Promise is in writing, and a live person answers around the clock. We’ll give you a firm quote before we start, and we’ll be the ones standing behind it when the job is done.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lenoir City since 2001.