Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Lennox
Gate repair in Lennox usually costs between $185 and $520 depending on whether we’re dealing with a rusted hinge post, a dead operator board, or a gate that’s been shaken out of plumb by LAX landing vibration. Most repairs in the 90304 zip code are done the same day we get the call, and every job gets a written price before we touch a wrench. If your gate is sagging, grinding, or refusing to close, call (877) 610-2993 and you’ll get a live person, not a phone tree.
We’re not a national chain. We’re Gatewood Fence & Gate, and we’ve been fixing gates in Lennox long enough to know exactly what this neighborhood throws at them. The name on the shop is Hal Gatewood, and the person who shows up at your property is someone who answers for the work.
Why Gatewood Fence & Gate Is Lennox’s Preferred Gate Repair Company
You’d be surprised how much bad gate work we find in Lennox. Rental properties with gates that were never built right in the first place, hinge posts that rusted through years ago and got a coat of paint instead of a repair, operator arms bolted to gates that were already sagging. When we show up, the first thing we do is figure out why the gate failed, not just what part broke. A gate sags in the hinge post, not in the middle, and that’s where we start. That’s the difference between a fix that lasts and one you’ll be calling about again in six months.
Our Gate Repair team lives in the same reality you do: salt fog rolling in from three miles out, planes coming down the approach corridor shaking everything loose, and gates that were installed when Richard Nixon was in office. That local knowledge means we don’t guess. We know which operator boards are still available for a 1980s SwingMaster and which ones are better off replaced. We know which hinge post repairs on a 1960s triplex can be welded in place and which ones need a new footing. And we back every repair with our 90-Day Done Right Promise in writing. If it’s not right, Hal comes back. No runaround.
We also answer the phone at 2 a.m. if that’s when your gate decides to quit. Not a voicemail, not a “leave a message and we’ll get back to you within 24 business hours.” A live person. Around the clock. Because a gate stuck open at midnight in Lennox is a security problem, not a scheduling inconvenience.
Our Gate Repair Services in Lennox
Electric Gate Repair
Electric gate repair in Lennox runs from about $210 for a sensor realignment or limit switch replacement up to $680 for a full control board swap. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, and we stock common relay boards and safety photocells so we’re not waiting a week for a part while your gate sits open. The salt-heavy marine air off the Pacific does a number on circuit boards and terminal connections, so we check every electrical contact for corrosion even when the obvious culprit is something else.
Automatic Gate Repair
Automatic gates in Lennox fail differently than gates in Lawndale or El Segundo, and the reason is mostly LAX. Low-altitude approach vibration rattles operator arms, loosens mounting bolts, and shakes limit switches out of adjustment. A typical automatic gate repair in Lennox runs $195 to $540 depending on whether we’re diagnosing a board failure, replacing a worn operator arm, or rebuilding a gate track. The gate opener stops when a plane flies over? That’s usually a loose wire or sensor that’s been vibrated partially out of position. We see it all the time.
Hinge & Post Repair
The marine layer here doesn’t just make the afternoon gray. It puts salt on every piece of iron on your property, including gate hinges. We often find hinges that look fine from ten feet away but are paper-thin at the weld point. Hinge and post repair in Lennox typically runs $240 to $620, depending on whether we can weld a reinforcement plate on site or need to core out and pour a new footing. Our crew welds in your driveway, not in a shop, so the gate stays where it belongs while we work on it. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Gate realignment in Lennox is one of our most common calls, and it’s usually the same story: a gate that dragged on the concrete for a few weeks, then stopped closing altogether. The cause is typically a hinge post that’s shifted out of plumb, often because the original footing was poured too shallow in sandy soil and has been slowly leaning for thirty years. Realignment runs about $180 to $350 for a standard single swing gate. We’ll level the gate, shim the hinges, adjust the operator arms, and make sure the safety photo eye is properly aligned before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lennox
We’re certified to service nine major gate brands, and in Lennox we see a lot of FAAC and BFT operators on older apartment buildings, plus a steady supply of LiftMaster and Linear on residential driveway gates. We keep common FAAC and Linear control boards and safety photocells in our service vehicles, which means a same-day repair in Lennox is usually possible without a second trip. If you’ve got a gate from the 1990s with a label we can still read, chances are we can fix it or know exactly what to retrofit.
Common Gate Repair Problems We See in Lennox Homes
- Vibration-loosened hardware from LAX approach traffic. Planes on final approach pass low enough to shake gate bolts loose in a matter of months. We regularly tighten and re-torque hinge bolts on Lennox gates that would stay tight for years in Lawndale or El Segundo.
- Rusted-through hinge posts on 1950s and 1960s rentals. The original steel posts on many Lennox duplexes and triplexes were set in shallow footings barely 18 inches deep. Salt fog plus fifty years of deferred maintenance means we often replace or reinforce the post, not just the hinge.
- Obsolete control boards that won’t pass a photocell safety test. A 40-year-old operator with a burned control board usually isn’t repairable at any honest price. We’ll tell you when a retrofit makes more sense than spending money on a board that fails again in a year.
- Salt-corrosion on weld joints and latch mechanisms. The marine layer coats everything with salt, and weld joints are usually the first to show it. We grind out the rust, re-weld on site, and seal the repair so it survives the fog season.
Pricing for Gate Repair in Lennox, CA
Here’s what you can expect for gate repair in Lennox, based on the work we typically do in 90304:
- Gate realignment: $180 - $350
- Hinge replacement or weld repair: $240 - $620
- Electric gate repair (sensors, limits, wiring): $210 - $480
- Control board replacement: $380 - $680
- Full operator replacement: $750 - $1,400 depending on brand and gate size
Every price is quoted in writing before we start work. You’ll agree to the number up front, and the invoice will match it. We don’t play the game where the phone quote was $200 and the door price is $600. There’s no trip charge inside the county, and if you’ve got a written estimate from another company, we’ll give you a free second opinion on it. Seniors and veterans get 10% off, permanently. And any repair over $200 takes $40 off.
We Also Serve Cities Near Lennox
We’re based close enough to reach Lennox fast, and we also run calls into Del Aire, Hawthorne, Inglewood, and El Segundo. If you’re in one of those neighborhoods and your gate has started dragging or your operator has stopped responding, the same crew that handles Gate Repair in Lennox can get to you. Call (877) 610-2993 and we’ll tell you when we can be there.
Serving Lennox, CA - Our Local Coverage Area
We’re based in the Lennox area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Lennox
Because Lennox sits directly under the final approach corridor for LAX’s southern runways. The constant low-altitude vibration shakes hinge bolts loose and slowly pushes gate posts out of plumb. We see swing gates in Lennox lose alignment in six to nine months that would stay true for years in Lawndale or El Segundo. That’s why we re-torque every hinge bolt and check post plumb on every Lennox service call, even when the gate was aligned recently.
Honestly, probably not. A 40-year-old control board is obsolete, and nobody makes replacement parts for most of those units anymore. We’ll always check to see if a rebuild or aftermarket retrofit board exists, but in most cases, the cheaper long-term answer is replacing the operator with a current FAAC or LiftMaster unit that meets today’s safety standards. We’ll show you the numbers and let you decide. Call (877) 610-2993 and we’ll give you a straight answer on what’s repairable and what isn’t.
Sometimes, but not usually. If the rust is localized and the post still has structural integrity below the surface, we can weld a reinforcement sleeve and buy you a few more years. But if the post has rusted through at the footing line, which is where they always fail, a patch won’t hold and you’ll be fixing the same gate twice. Replacing the post and pouring a proper 36-inch footing is the honest fix. Give us a call and we’ll look at it free.
Almost certainly yes. What you’re describing is a sensor or limit switch that has wiggled partially loose from the constant vibration of the approach corridor. When a plane goes over, the extra vibration at just the right frequency causes a brief signal interruption and the opener’s safety circuit trips. We’ll come out, check every connection and sensor, tighten what’s loose, and your opener will stop protesting. That’s a service call, not a full replacement.
On a 1970s-era courtyard gate, it’s usually the rack teeth that have worn down from decades of use, or the pinion gear has lost its bite. But it could also be that the operator’s limit switch has drifted so the motor thinks the gate has reached closed when it’s still six inches short. We’ll diagnose it on site, tell you which part is actually bad, and quote the repair before we do anything else. Estimates are free. Call (877) 610-2993.
Call Gatewood Fence & Gate for Gate Repair in Lennox
If your Lennox gate is sagging, stuck, rusted, or ignoring its opener, call (877) 610-2993. We’ll answer live, ask what’s going on, and get someone to 90304 fast. Every repair is quoted up front in writing, backed by our 90-Day Done Right Promise, and done by a crew that knows Lennox, the marine layer, the LAX vibration, and the difference between a fix that lasts and one that looks good for a month. The name is on the shop, and the work will be on your gate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, repairing and maintaining gates since 2001.