Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Keller
When your gate motor fails in Keller, you need somebody who knows the difference between a board issue and a post that’s heaved out of plumb after a wet spring. Around here, those two problems look identical from the driveway but cost very different money to fix. Our Gate Motor & Opener crew covers every subdivision in Keller, TX, usually arriving same day for a motor that’s humming but won’t move or a gate that’s stopped responding to the remote. You’ll talk to a live person when you call (877) 610-2993, not a recording. Hal Gatewood has owned this shop since 2001, and he still answers the phone himself.
Keller’s gate motor work is not a generic repair job. The clay under your brick pillars swells in spring and contracts in August, and your gate operator feels every inch of it. That’s why we start every service call by looking at the post footing before we touch the motor itself. Fix the motor without checking the post and you’ll be calling us again in six months.
Why Gatewood Fence & Gate Is Keller’s Preferred Gate Motor & Opener Company
Keller homeowners have dealt with enough national outfits that quote one price on the phone and a different one at the door. Hal Gatewood put his name on the shop and his address in the phone book because he’s not passing through. For over two decades, he’s been the one showing up in Keller with a welder in the truck and the gate repair handbook in his head, not a salesman with a tablet and a financing pitch.
Every Keller job carries the 90-Day Done Right Promise in writing. That’s not a warranty buried in fine print. If the motor misbehaves after we leave, one call brings us back. Hal’s crew is background-checked, uniformed, and certified to service nine major gate brands, including LiftMaster and Linear. When you call, a live person answers 24 hours a day, seven days a week. No call center three states away, no voicemail queue. The office line is (877) 610-2993, and Hal will be the one who picks up.
We don’t just swap parts that don’t need swapping. If a hinge weld cracked because the post moved, we weld it back in your driveway. That’s the difference between a repair that lasts and a repair that gets billed twice.
Our Gate Motor & Opener Services in Keller
Keller’s gate motors do more work than the average North Texas operator. They swing heavier panels, they run on tighter arcs between brick pillars, and they answer to HOA hardware standards that didn’t exist when the house was built. Here’s what we handle most often in the 76244 and 76248 ZIP codes.
Motor Installation
A new gate operator in Keller is a measured job, not a same-day swap. We come out, take notes on your gate’s weight, hinge type, pillar condition, and existing wiring, then quote you a written price before any work starts. We install LiftMaster, Linear, Viking, Ghost Controls, DoorKing, and several others, and we wire the operator into your existing entry system so the remote, keypad, and intercom all talk to each other.
Motor Repair
Most Keller motor failures we see are not actually motor failures. They’re post movement, bad capacitor, misaligned photocell, or a limit switch that slipped. We diagnose on site and tell you honestly if the motor needs replacing or just a $40 part. If the fix is under $200, we’ll still knock $40 off. Prices are agreed before we touch anything.
Linear Motor
Linear operators are the workhorse in Keller’s slide gate communities, particularly along Keller Parkway and the subdivisions east of Rufe Snow Drive. When the summer drought contracts the clay and the rack-and-pinion drive starts jerking, it’s usually the post footing underneath that’s moved, not the motor itself. Clay isn’t mechanical and it isn’t cooperative. We rebuild the post base, reset the rack, and recalibrate the travel limits so the gate runs clean again.
Slide Motor
Slide gates catch more problems here than swing gates because they ride on wheels and a track that have to stay perfectly level. When Keller’s clay drops a post by half an inch in August, a slide gate will bind mid-travel and trip the safety sensor. We realign the track, service the chain or belt, and check the motor’s torque settings against the gate’s actual weight. The operator that was maxed out for a light aluminum gate is the same operator that strips its own gears on a heavy ornamented steel one.
We also service intercom integration and battery backup systems for Keller gates. A gate motor that doesn’t open the gate is a parking problem. A gate motor that runs on HOA-approved hardware is a compliance problem. We handle both.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
We service the brands already wired into Keller’s homes, which means we stock parts for Viking, Ghost Controls, and DoorKing right on the truck. If you’ve got a LiftMaster or Linear operator that’s been running since the early 2000s, we can still order the board and replace it without swapping the whole unit. The same goes for a lot of older FAAC and BFT gear. We’d rather repair your existing operator than sell you a new one, and the pricing reflects that.
Common Gate Motor & Opener Problems We See in Keller Homes
- Post heave in wet springs: The Blackland and Fort Worth Prairie clay under Keller swells after heavy North Texas spring rains, pushing brick pillar bases out of plumb. The gate no longer lines up with the operator’s arm, and the motor strains against a load it was never designed to carry.
- Drought drop in summer: That same clay contracts sharply in July and August. Post footings settle a fraction of an inch, the gate’s rack-and-pinion drive misaligns, and the operator starts grinding or jerking near the end of its travel.
- Hail and wind damage: North Texas hail and straight-line winds bend decorative ironwork, which then binds against the gate operator and trips safety photocells for no reason the homeowner can see from the driveway.
- HOA hardware mismatches: A replacement motor or bracket that doesn’t match the original powder-coat finish or picket profile can trigger a compliance notice in a Keller HOA, even if the gate works perfectly. We match the original spec before we start, which saves you a second repair and an architectural-review headache.
Pricing for Gate Motor & Opener in Keller, TX
Here’s what Keller homeowners should expect to pay. A motor repair on a swing gate typically runs $180 to $340, including the service visit and common parts like capacitors, limit switches, and photocell alignment. A full motor replacement on a standard single swing gate in Keller runs $850 to $1,400 installed, depending on the brand and the gate’s weight. A slide motor replacement runs $900 to $1,600. Underground operators, which are common on the newer custom gates near Marshall Ridge and the Estates at Keller, run higher because the access and waterproofing are more involved. Battery backup installation runs $300 to $600 and takes about half a day.
No trip charge inside the county. Every quote is in writing, and the price we quote is the price you pay. Seniors and veterans get a permanent 10% discount, and any repair over $200 gets $40 off. If another company gave you a written estimate, we’ll give you a free second opinion on it. Call (877) 610-2993 and Hal will talk you through the numbers.
We Also Serve Cities Near Keller
Our Gate Motor & Opener in Keller work regularly takes us to the surrounding North Tarrant County communities, including Watauga, North Richland Hills, Roanoke, and Saginaw. Same HOA review process, same shrink-swell clay, same need for a gate motor that runs true when the ground moves. If you’re in one of these cities and your operator’s acting up, call us. We’ll come to you.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Keller
Most Keller HOAs care less about the motor brand and more about the visible hardware finish and picket profile, so switching brands is generally fine as long as the new operator’s brackets, arms, and any visible conduit match the original approved spec. In Keller’s master-planned communities, a visible hardware change usually requires architectural review approval before the work can be completed.
Keller sits on expansive Fort Worth Prairie clay that swells measurably in wet spring weather, lifting brick pillar bases and pushing hinge posts out of alignment. The motor isn’t failing. The geometry underneath it is changing, and the motor is carrying a load it was never set for.
Yes, we commonly integrate new operators with existing intercom and camera systems in Keller’s 76248 subdivisions, matching the new operator’s relay logic and contact closure to whatever entry system is already wired at the gate.
That jerk is usually the rack-and-pinion drive misaligning because the drought has contracted the clay under the gate’s track, dropping a post footing enough to change the rail geometry. The fix is realigning the rack and track, not replacing the motor.
A battery backup is a smart addition in Keller because spring thunderstorms and the occasional winter ice event knock out power, and a gate with no battery means you’re either trapped in or locked out. Basic backup units run $300 to $600 installed.
If your gate motor is groaning, binding, or dead in Keller, call (877) 610-2993. A live person answers, the estimate is free, and Hal Gatewood stands behind every job with the 90-Day Done Right Promise in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Keller since 2001.