Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Joshua
Gate repair in Joshua, TX usually comes down to one thing: the black clay under your posts. When a gate won’t close, a hinge post leans, or an opener strains against a panel that used to swing free, the soil usually started it. We fix the post first, then the hardware. That’s why calls from Joshua to Gate Repair tend to involve re-setting, re-plumbing, and welding on site rather than hauling a gate to a shop. Call (877) 610-2993 and you’ll get Hal or someone on his crew, not a menu.
Why Gatewood Fence & Gate Is Joshua’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop, the invoice, and the truck that pulls into your driveway. That matters in a town like Joshua, where people still check a license number and expect to see the same face at the hardware store and at the job site. Dispatch and scheduling run through our Dallas-Fort Worth office, but the person who shows up in Joshua lives this work.
Homeowners in Joshua call us back because we repair what another company wanted to replace. We weld on site. We re-set the post instead of slapping a brace on the panel. And every job, no matter how small, carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. That’s not a slogan; it’s stamped on the paperwork.
We answer the phone around the clock. A live person picks up, even at 2 a.m. when a windstorm off the prairie blew your gate off the latch and the dog is loose. No voicemail tree, no call center three states away.
Our Gate Repair Services in Joshua
Electric Gate Repair
Electric gates in Joshua work hard. Long driveways off FM 3048 and rural acreage roads mean operators cycle more times per day than a suburban gate, and that strain shows up in motor brushes, control boards, and limit switches. We service Linear, Viking, Ghost Controls, and DoorKing systems, along with LiftMaster, FAAC, BFT, and Mighty Mule. When an electric gate stops mid-travel or won’t respond to the remote, we diagnose the operator and the power feed before recommending parts. Often the issue isn’t the motor at all. It’s the post the motor is bolted to.

Automatic Gate Repair
Automatic gate repair in Joshua means accounting for two seasons: the wet spring that moves posts, and the dry summer that cracks welds. A swing-arm opener that binds after April rains is a soil problem, not a motor problem. Once we re-plumb the hinge post, the arm lines up and the limit switches work again. We also replace safety photocells that get knocked out of alignment when the soil shifts. On solar-charged systems, we check panel tilt and battery health because a panel that’s even a few degrees off after a storm can’t keep a heavy ranch gate operator charged.

Hinge & Post Repair
This is the core of gate repair in Joshua. The Blackland Prairie clay expands after spring rains and shrinks hard during summer drought, and that movement torques posts out of plumb. A sagging gate isn’t sagging in the middle. It’s leaning at the hinge post. We excavate the footing, re-set the post in concrete, and re-hang the gate so the swing arc clears the ground. On older ranch properties where the original posts were set shallow, we often find the post itself twisted or rusted at the ground line. We cut out the bad section, weld in a new one, and re-set the whole assembly deeper than it was before.

Gate Realignment
When a gate drags, catches, or won’t latch, realignment usually fixes it. We re-set posts, adjust hinges, and shim panels. On welded pipe and ornamental iron gates, we may cut a weld, re-angle the frame, and weld it back while it’s hanging exactly where it belongs. On the newer subdivision streets off FM 3048 and US-174, this is the most common fix after a wet spring. The clay pushes the anchor post inward, the swing arm binds, and the gate won’t fully close. We set the post back, check the operator’s travel limits, and test the safety edges.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Joshua
We’re certified to service nine major gate brands, and in Joshua we see a lot of Linear and Ghost Controls on the acreage properties, plus DoorKing on some of the subdivision driveway gates. We keep common parts for these systems in our trucks, so a repair doesn’t turn into two trips. If a board or motor has to be ordered, we tell you that up front, with a real price and a real arrival window.
Common Gate Repair Problems We See in Joshua Homes
- Hinge posts heaving out of plumb. The black clay expands after spring rains and pushes shallow-set posts out of vertical. The gate then drags or binds, and the opener strains against the misalignment.
- Swing gates binding shut after wet springs. Clay heave pushes the hinge post inward, which shifts the swing arc. The gate won’t close, and the safety photocell on the opener loses alignment.
- Cracked welds on ornamental iron gates. July and August run 100°F plus, and repeated expansion and contraction fatigues weld joints at the frame corners. Then winter ice events stress the latch and hinges further.
- Solar opener batteries running down. Long rural driveways need heavier operators, which draw more current. If the solar panel tilts even slightly after a storm shifts the post, the battery can’t recover a full charge.
Pricing for Gate Repair in Joshua, TX
You’ll get a price before any work starts. Here’s what we typically see in Joshua:
- Hinge and post repair on a ranch gate: $75-$300, depending on whether we re-set one post or two and whether concrete work is needed.
- Gate realignment (no post excavation): $95-$220.
- Weld and rust repair on an ornamental iron gate: $45-$150 per weld location, depending on access and prep.
- Electric gate opener repair: $120-$380, including diagnosis. Parts are extra if a board or motor has failed.
- Automatic gate opener full replacement: $850-$2,400, depending on the operator’s weight rating and whether it’s solar or wired.
The clay soil in Joshua means post work is often the bulk of a repair quote. We’ll tell you that up front. Standing offers that apply to Joshua: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Every price is quoted and agreed before the first tool comes off the truck.
We Also Serve Cities Near Joshua
Our Gate Repair in Joshua customers often refer us to friends and family in Keene, Burleson, Crowley, and Cleburne. We run those routes regularly, and the same crew that fixes your gate on the south side of Joshua will be the one who shows up across the county line. Same phone number, same guarantee, same person on the other end.
Serving Joshua, TX - Our Local Coverage Area
We’re based in the Joshua area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Joshua
The clay soil under your post swells after spring rain, pushes the hinge post out of vertical, and the gate binds before it reaches the latch. That’s the most common seasonal pattern we see on properties along FM 3048 and US-174. The fix is to re-set the post, not to adjust the opener’s force settings. Call (877) 610-2993 and we’ll come see whether the post moved or the opener is straining against a different problem.
Yes, and that’s the repair-first approach we’ve used since 2001. A ranch gate sagging at the latch usually means the hinge post has leaned or the gate’s frame has pulled at the welds. We re-set the post, re-weld the frame on site, and re-hang the gate while it’s hanging where it belongs. You keep your gate.
Two things. The heavier operators that long rural driveways require draw more current, so the battery works harder. And after storms, when the post shifts even a little, the solar panel tilt changes enough to cut charging efficiency. We check panel angle, mounting bracket stability, battery condition, and the operator’s current draw. The fix is often simpler and cheaper than a new opener. Call (877) 610-2993 for a free estimate.
Yes. UL 325 requires entrapment protection devices like photo eyes on automatic gate operators, regardless of where the property sits. The requirement is federal. On rural acreage in Joshua, we also recommend edge sensors because livestock and wildlife don’t always trip a photo eye. Same rule applies to remote properties off FM 3048 as to a subdivision lot in town.
Heat and movement. Joshua’s summer heat pushes 100°F plus, expanding the iron. Then a cold snap contracts it. Years of that cycle, combined with a post that’s moved a fraction in the clay, concentrates stress at frame corners and hinge points. The weld cracks, then rust starts working into the joint. We grind it clean, weld it, and re-paint the repaired section. If the post moved, we address that too, or the new weld won’t last.
Call Gatewood Fence & Gate for Gate Repair in Joshua
If your gate is leaning, dragging, or not closing, call (877) 610-2993. You’ll get a live person, a straight answer, and a price before any work starts. Hal Gatewood’s name is on the shop and on every invoice. If the job isn’t done right, the 90-Day Done Right Promise means one call brings us back. We’ve been at this since 2001, and we’re not hard to find.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Joshua since 2001.





Before
After
Before
After
Before
After