Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Joshua
Gate parts and welding in Joshua, TX usually means one of two things: a sagging gate that won’t close right, or a broken weld that’s getting worse every time the wind blows. Most jobs we handle in Joshua run between $180 and $650, and we can usually have someone at your place within 24 to 48 hours. Hal Gatewood has been fixing gates since 2001, and he still answers the phone himself. Call (877) 610-2993 and tell us what the gate is doing, or what it stopped doing.
What makes Joshua different from the suburbs up north is simple: black clay. The Blackland Prairie soil under Joshua swells after every wet spring and shrinks hard in August. That movement is what breaks posts, snaps welds, and binds swing arms. We know that because we fix it here every week.
Why Gatewood Fence & Gate Is Joshua’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001, and his name is still on every invoice. That matters in a town like Joshua, where people talk, and a bad job follows you to church on Sunday. We’re not a franchise, and we don’t hand your gate off to a subcontractor. The person who quotes the work is the person who shows up, welds it, and hands you a written 90-Day Done Right Promise before he leaves.
Joshua homeowners call us for a reason we’re a little old-fashioned about. A live person answers our phone 24 hours a day, 7 days a week. Not a voicemail, not a call center. Call at 2:00 in the morning because your gate won’t close and you’ll talk to someone who can actually help. That’s the whole point of being local.
We also know Joshua’s housing stock. The older acreage places off county roads have pipe gates and ranch gates set in shallow footings that the clay torqued out of plumb years ago. The newer subdivisions off FM 3048 and US-174 have ornamental iron gates with automated openers, and those have their own set of seasonal problems. Different gates, different fixes, and we know which is which before we pull into your driveway.
There’s a phrase Hal uses when someone asks why they should trust us instead of the cheapest bid: “I’ll be there myself, or you can drive to the shop and look me in the eye.” That’s still how we run it in Joshua.
Our Gate Parts & Welding Services in Joshua
Here’s what we actually do for gate owners in Joshua. Most of our work falls into four categories. Every job gets the same treatment: a real diagnosis, a written price before any work starts, and the 90-Day Done Right Promise in writing.
Hinge Replacement
Hinges fail before almost anything else on a Joshua gate. Clay soil movement slowly rotates the gate’s weight onto one hinge, and the metal fatigues. On a ranch gate off a county road, that means a drooping corner and a latch that won’t line up. On a subdivision gate off FM 3048, it means a swing arm that binds. We replace the hinge, but we also check the post it’s attached to. Fix the panel without the post and you’ll fix it twice. That’s a reality of Joshua’s soil, not a sales pitch.
Post Replacement
This is the biggest one in Joshua. Blackland Prairie clay expands after spring rains and pushes posts out of plumb. In a single wet season, we’ve measured gate posts moved up to 3 inches. That’s not something you see in the sandy soil 20 miles north of here. When we replace a post in Joshua, we dig deeper than the original, set it on a concrete footing with gravel drainage at the base, and re-plumb it dead level. Most ranch-era posts were set 24 to 30 inches deep with no drainage. That’s why they moved.
Rail Repair
The horizontal rails on a gate frame carry the gate’s weight, and in Joshua they fail in two predictable ways. Summer heat cycles over 100°F expand and contract the steel, eventually cracking weld joints where the rail meets the upright. And on ranch gates, the rail itself often bends after years of pulling against a post that’s drifted. We straighten or replace the rail, weld it true, and sometimes add a gusset at the corners so the same stress doesn’t crack it again.
Custom Welding
We weld on site, in your driveway. That’s been our repair-first philosophy since 2001. If a ranch gate’s cross-brace is cracked or a subdivision gate’s frame has pulled apart at a corner, we don’t haul it off and tell you to buy a new one. Hal welds it where it stands, grinds it smooth, primes it, and paints it. We work in mild steel, cast iron repair where the gate calls for it, and galvanized stock for anything that touches Joshua’s clay directly. Every weld carries the same 90-Day Done Right Promise as a full gate install.
And if you’ve got a written estimate from another company, bring it to us. We’ll give you a free second opinion before you spend a dime.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Joshua
Joshua homeowners have a mix of automatic openers, and we’re certified to service the ones you’re most likely to have: LiftMaster, DoorKing, Ghost Controls, and Viking, along with FAAC, BFT, Linear, Elite, and Mighty Mule. When your opener needs a control board, a safety photocell, or a new arm bracket, we carry the common parts in our trucks and can get uncommon ones fast. That matters in Joshua because a gate stuck open is a gate not doing its job. We also know which opener brands hold up better on Joshua’s clay-heavy lots. DoorKing and LiftMaster swing arms, for example, handle post movement more gracefully than some lighter residential models. Ask Hal about that if you’re replacing an opener.
Common Gate Parts & Welding Problems We See in Joshua Homes
- Posts pushed out of plumb by expanding clay. Spring rains saturate the Blackland Prairie soil, which swells and presses sideways on post footings. A post that was dead plumb in February can be 2 to 3 inches out by May, and the gate starts binding at the latch.
- Weld cracks from summer heat cycles. July and August dry the clay and push surface temperatures past 100°F. Steel expands, contracts, and eventually cracks at the weakest point-usually where a rail meets an upright or where a cross-brace ties into the frame.
- Swing arms that bind after wet weather. On the newer subdivision streets off FM 3048 and US-174, automatic gates fail to close all the way after a wet spring. The anchor post moves inward, the swing arm geometry changes, and the opener’s safety system reads the resistance and stops.
- Loose post footings from summer drought. When the clay dries out, it shrinks and pulls back from the footing. The post gains wiggle room. A gate that felt solid in June can feel loose by September, and the hinge post starts leaning under the gate’s weight.
None of these are your fault. They’re what Joshua’s geology does to steel that’s been in the ground for a while. The fix is knowing what soil you’re dealing with and building for it.
Pricing for Gate Parts & Welding in Joshua, TX
Here are honest numbers for Joshua’s market. Hinge replacement on a standard single swing gate typically runs $180 to $340, including the new hinges and labor. Post replacement is the bigger job. In Joshua, where we often have to dig deeper and add drainage, plan on $450 to $900 per post, depending on whether it’s a simple pipe post or a larger ornamental iron column. Rail repair ranges from $150 to $400. Custom welding jobs, like re-welding a cracked frame or adding a cross-brace, usually land between $200 and $650. The price is quoted and agreed before any work starts, so there’s no surprise invoice at the door. You’ll also get $40 off any repair over $200, and seniors and veterans always get 10% off. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Joshua
Our Gate Parts & Welding crew covers Joshua and the surrounding area. If you’re in Joshua, we’re already nearby. We also serve Keene, Burleson, Crowley, and Cleburne, so if you live just outside the city limits, give us a call and we’ll head your way.
Serving Joshua, TX - Our Local Coverage Area
We’re based in the Joshua area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Joshua
Because the Blackland Prairie clay under Joshua swells dramatically when saturated, and that swelling pushes your gate post sideways into the gate’s swing path. The gate was fine in March, the rains came, the clay expanded, and by May the post has moved enough to bind the gate at the latch or the swing arm. The fix is re-plumbing the post on a deeper footing with drainage, not just adjusting the hinges. Call (877) 610-2993 and we’ll explain what we’re seeing and schedule a look.
Yes, and the difference matters in Joshua’s clay soil. Galvanized posts resist the moisture and soil contact that eats painted steel from below ground upward. We specify galvanized stock for anything that will be in direct contact with Joshua’s clay, especially new post installations. Painted steel is fine for above-ground rails and panels, but the part in the ground should be galvanized or set in concrete with a moisture barrier.
Usually, yes. A gate sags in the hinge post, not in the middle, and that’s where we start. If the panel itself isn’t cracked or rusted through, re-plumbing the post and replacing the hinge fixes the sag. If the frame is cracked at a weld joint, we weld it on site. We only recommend replacing a whole panel when the steel itself has failed, and we’ll show you exactly why before quoting that work.
We do on-site MIG welding for mild steel ranch gates and pipe gates, which covers nearly everything found on the older acreage homesteads around Joshua. For ornamental iron subdivision gates, we weld the steel frame joints and repair broken cast-iron details where possible. After welding, we grind, prime, and paint to match the existing finish. The gate stays in your driveway the whole time.
If your automatic gate starts closing but reverses before it reaches the closed position, or if it won’t close at all after a storm, the safety photocells are usually the first thing to check. They get knocked out of alignment when a gate post moves, especially after Joshua’s wet springs shift the footing. We re-align or replace photocells as part of regular opener service, and we check them on every gate repair call because a misaligned photocell is the most common reason a Joshua gate refuses to close.
Most gate parts and welding calls in Joshua are scheduled within 24 to 48 hours. If your gate won’t close and you can’t secure your property, tell us when you call, and we’ll treat it as a priority. A live person answers (877) 610-2993 around the clock, so don’t wait until morning if the gate is stuck open tonight.
Call Gatewood Fence & Gate for Gate Parts & Welding in Joshua
If your gate is sagging, binding, cracked, or just not closing right, call Hal at (877) 610-2993. We’ll give you a straight answer, a written price, and a 90-Day Done Right Promise on every job. You can call now, or you can wait until the next rain pushes that post out a little further. Either way, we’ll be here.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Joshua and the surrounding DFW communities since 2001.