Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hyattsville
Gate repair in Hyattsville usually costs between $185 and $425 for common hinge, latch, and realignment work, while automatic gate operator repairs typically run $295 to $680. Most jobs are completed the same day we arrive, and the price is agreed in writing before any tool leaves the truck. If your gate is sagging, stuck, or refusing to open after a storm, call (877) 610-2993 and you’ll get Hal or a member of his crew on the phone – a real person, not a menu.
We work the older blocks along Baltimore Avenue, the side streets of Ward 2, and the postwar neighborhoods behind Hyattsville Middle School regularly. Those rear-alley gates from the 1940s and 50s fail in predictable ways around here, and we know exactly what to look for before we quote a number.
Why Gatewood Fence & Gate Is Hyattsville’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and the shop is down the road from Hyattsville – not three states away. Our Gate Repair crew serves Hyattsville from the 20782, 20783, 20784, and 20785 zip codes every week. We answer the phone around the clock and you’re welcome to drive over and look Hal in the eye before he ever steps onto your property. The name is on the shop, and the shop is published – that’s the oldest accountability there is.
Hyattsville homeowners keep calling us back because we fix what other companies want to replace. A gate sags in the hinge post, not in the middle – and that’s where we start. We weld on site, in your driveway or alley, so the gate never leaves your property. Every job comes with the 90-Day Done Right Promise in writing: if it’s not right, one call brings us back.
Standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside Prince George’s County, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. That’s it. No games on the phone and no surprise line items at the door.
Our Gate Repair Services in Hyattsville
Electric Gate Repair
Electric gate operators in Hyattsville take a beating from summer squalls that knock out power and cook control boards in the humidity. When an operator near University Park or West Hyattsville stops responding after a storm, we check the power feed, the limit cams, and the safety edges before we quote anything. We service Linear, Viking, Ghost Controls, and DoorKing operators, and we stock common boards and remotes locally so turnaround stays fast.
Automatic Gate Repair
Automatic gate repair in Hyattsville often comes down to a geared rack that someone forced by hand during an outage and sheared. The manual-release procedure is there for a reason – pull the release first, then move the gate. If it’s too late and the rack and pinion are stripped, we can replace the drive components without swapping the whole operator. Most automatic gate jobs in the 20783 and 20785 area are done same-day when the parts are on the truck.
Hinge & Post Repair
This is the one we see constantly in Hyattsville’s older blocks. The rear-alley gate posts behind the Cape Cods and bungalows along Baltimore Avenue were set in the 1940s and 50s by pouring concrete directly into Prince George’s County clay with no gravel bed. Decades of freeze-thaw cycles have cracked those footings and pulled the posts off-plumb. Fix the panel without the post and you’ll fix it twice. We core out the old footing, set a new post in gravel-drained concrete, and weld or realign the frame so the gate closes square.
Gate Realignment
When a gate scrapes the ground or the latch bar drops out of alignment every winter, the problem is almost never the latch itself. It’s the post the gate hangs from. We realign the welded frame, reset the pins, and shim the hinges so the gate swings freely again. In Hyattsville’s humid summers, we also address rust at the hinge knuckles while we’re there – it’s the same labor while the gate is already open.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hyattsville
We service nine major gate brands, including Linear, Viking, Ghost Controls, and DoorKing operators found throughout Hyattsville’s newer townhome communities near the Prince George’s Plaza Metro corridor and in the older single-family blocks alike. Our techs carry common circuit boards, remote transmitters, and safety sensors for these brands on the truck, so a service call to Hyattsville is usually one trip, not three. If your operator’s a brand we don’t recognize, we’ll tell you straight on the phone rather than pretending.
Common Gate Repair Problems We See in Hyattsville Homes
- Storm wind twisting solid infill panels. Solid wood or metal gates catch nor’easter wind like a sail, twisting the panel and pulling hinge posts out of saturated clay after heavy storms. We see this after every serious weather system that rolls through the 20782 and 20784 zip codes.
- Freeze-thaw heave binding latches every winter. PG County clay heaves post footings sideways through the cold months, which drops latch bars out of alignment year after year. The fix is footing work, not a bigger latch.
- Dead operators after summer outages. Power cuts from squall lines leave automatic gate operators dead. Homeowners who force a geared operator by hand strip the rack and pinion and shear the limit cams – an expensive misstep that’s easy to avoid with the manual release.
- Rust-through on 1950s iron alley gates. Humid summers strip paint and rust bare steel fast around here. We regularly see original iron gates along the rear alleys of Ward 2 with hinges rusted through but a perfectly salvageable panel – and we weld those panels back to life rather than trashing them.
Pricing for Gate Repair in Hyattsville, MD
A typical hinge or latch repair in Hyattsville runs $185-$325. Gate realignment on a sagging alley gate costs $240-$475, depending on how far the post has moved. Automatic gate operator repair – boards, limit cams, rack and pinion – lands between $295 and $680. Weld and rust repair on broken pickets or rusted hinges runs $150-$400, based on how much steel work the panel needs.
What moves the number is almost always the post footing. If the post has heaved or cracked, the job becomes a footing re-pour plus the gate work, and Hyattsville’s older clay-set posts make that more likely than in the newer subdivisions. Every quote is written down and agreed to before we start. There is no version of this where you answer the door to a bigger number. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Hyattsville
Our Gate Repair in Hyattsville crew also covers Riverdale Park, East Riverdale, Bladensburg, and Cheverly. If you’re just outside the city line, chances are we’ve already got a job on your block this week – call and ask.
Serving Hyattsville, MD - Our Local Coverage Area
We’re based in the Hyattsville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Hyattsville
The sag isn’t coming from the hinges – it’s coming from the post. In Hyattsville’s pre-1960 rear-alley housing stock, gate posts were set directly in Prince George’s County’s expansive clay with no gravel bed. Freeze-thaw cycles heave that clay, cracking the footing and pulling the post off-plumb. Bending hinges back without fixing the footing is like straightening a picture frame on a leaning wall. The real fix is coring out the cracked footing, setting a new post in gravel-drained concrete, and realigning the frame. Call (877) 610-2993 and we’ll tell you if your post is the problem before anyone quotes a hinge job.
Yes, usually the same day. Power outages near the University Park area often leave control boards fried or limit cams sheared, especially if the gate was forced by hand while the power was out. We carry boards, remotes, and drive components for Linear, Viking, Ghost Controls, and DoorKing operators on the truck, so most automatic gate repairs in the 20782 and 20784 zips are done in one visit. Before you touch a dead operator, pull the manual release – forcing a geared motor by hand is how sheared racks happen. Then call us at (877) 610-2993.
Worth repairing, almost always. Hyattsville’s humid summers strip paint and rust bare steel, but the panel itself is usually still solid – the hinges and latch plate are what fail first. We weld new hinge barrels and latch hardware onto your existing gate, treat the rust, and get it closing square again. It’s real repair work, not a parts-swap, and it’s why we’re the people homeowners call when a national outfit told them to buy a whole new gate. Call (877) 610-2993 for an honest read on what’s salvageable.
Yes – the post comes out and a new one goes in, but the fence panels stay put. We core out the old footing, set a new post in gravel-drained concrete, and re-hang the gate. No fence-line teardown, no dragged-out demo. In Hyattsville’s clay soil, we always bed the new post with drainage gravel so the freeze-thaw cycles stop heaving it. A job that looks like gate work is really footing work – and we’re set up for it. Call (877) 610-2993 and we’ll come look at the post plumb before quoting anything.
For most operator replacements on existing gates, no permit is required in Hyattsville – it’s a repair or replacement of existing hardware, not new construction. The exception is when you’re adding a new gate structure or changing the footprint of the opening, which may trigger city review. We’ve done enough work along the alley lots of Ward 2 and near the 20783 corridor to tell you straight whether your specific job needs paperwork, and we’ll never tell you to skip a permit if one’s required. Call (877) 610-2993 and ask us about your specific gate.
Call Gatewood Fence & Gate for Gate Repair in Hyattsville
Show me the gate closing on its own and I’ll show you where it’s failing. That’s how we look at every job in Hyattsville – the storm-twisted panel, the heaved post, the dead operator after the last squall. We’ll come out, find the actual problem, write you a number, and fix it right. The 90-Day Done Right Promise is in writing on every job. Call (877) 610-2993 now and you’ll get Hal or a member of his crew, not a machine. Free estimates, no trip charge in Prince George’s County, and the name on the shop is the name that stands behind the work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hyattsville since 2001.