Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hubbard
Gate repair in Hubbard usually runs $180 to $620 for most residential fixes, and we can get to your house faster than a national outfit because the person answering the phone knows Hubbard’s streets, not a script. If your gate drags on the driveway, a hinge has snapped, or an opener motor just hums without moving, call (877) 610-2993 and you’ll talk to a real person who can tell you what’s wrong and what it’ll cost before we ever roll a truck. Hal Gatewood has been fixing gates since 2001, and the crew that shows up in your driveway works on Hubbard gates week in and week out.
We know the difference between a gate that’s tired after forty Hubbards winters and one that’s actually dangerous to leave for another week. Most calls in 44425 are fixable same visit. No trip charge inside the county. $40 off any repair over $200.
Why Gatewood Fence & Gate Is Hubbard’s Preferred Gate Repair Company
We’re the shop with a published address and a license number you can look up. Hal’s name is on the building and on every invoice, and the phone rings to a live person 24 hours a day, seven days a week. That’s not a policy line for a brochure. It’s just how a one-owner operation runs, because when you’re the name on the door you answer when somebody calls at 7 a.m. with a gate stuck open and a dog that wants out.
Hubbard homeowners tend to call us because they’ve already tried the big-box installer route once and got burned. Quoted one price on the phone, handed a different invoice at the door. We don’t work that way. The price you get quoted is the price on the work order, and we put the 90-Day Done Right Promise in writing on every job. If it’s not right, we come back and make it right. One call. No runaround.
Our crew is background-checked and uniformed. We service nine major gate brands including FAAC, BFT, Linear, and Viking. And when a Hubbard customer needs a part we don’t have on the truck, we don’t disappear for a week waiting on a warehouse an hour away. We weld on site. We repair the gate in your driveway instead of hauling it off and leaving you with a gap in your fence for two weeks.
Our Gate Repair Services in Hubbard
Every gate on a Hubbard street has a story, and most of them start the same way: a post set in shallow concrete during the Eisenhower administration, a winter of freeze-thaw heave, and a panel that suddenly doesn’t line up anymore. Here’s what we fix most often.
Hinge & Post Repair
In Hubbard, the hinge post is where ninety percent of gate problems start. The 1950s and 1960s post footings around town are frequently only 18 to 24 inches deep, and Trumbull County’s thirty-plus freeze-thaw cycles every winter work those posts out of plumb inch by inch. Fixing the hinge without resetting the post means you’ll be calling again by spring. We dig it out, pour a new 36-inch sonotube footing, weld the hinge plate back square, and the gate actually swings true for years instead of months.
Gate Realignment
A gate that drags the driveway or won’t latch isn’t a mystery. The post moved, the panel sagged, or both. On Hubbard’s narrow shared driveways, a misaligned swing gate is more than an annoyance. It blocks the neighbor’s car, scrapes the asphalt, and puts stress on every hinge that’s still holding. We measure, re-set, re-hang, and test the full swing arc before we pack up.
Electric Gate Repair
Electric gate operators on Hubbard properties deal with the same freeze-thaw punishment as the hardware. Motors seize, circuit boards corrode from lake-effect moisture, and swing arms strip gears when the gate’s arc runs into a fence or a parked car. We service and repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators right on site. We stock common boards, arms, and remotes for these brands so we’re not ordering parts on a three-day delay while your gate sits half-open.
Automatic Gate Repair
On Hubbard’s tight lots, automatic gates have to be installed and repaired with real-world clearance in mind. A swing operator that looks fine on paper fails fast when the gate can’t complete its 90-degree arc without kissing a fence or a car bumper. We repair what’s there when we can, and when we can’t, we recommend the fix that actually fits your driveway rather than the one that was installed wrong ten years ago. Safety photocells and proper force settings are part of every automatic gate repair we do. No exceptions.
Lock Repair and Weld & Rust Repair
Rusted-out latch posts, broken lock boxes, hinge welds cracked through from years of freeze-thaw stress. We weld these on site. A chain-link gate that’s rusted through at the hinge post can often be re-welded with a reinforcing plate and live another decade instead of hitting the scrap pile. Hal would rather weld a gate than replace it, and the person who shows up at your house has been doing this work since before the smartphone was invented.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hubbard
We’re certified to service FAAC, BFT, Linear, and Viking operators, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Hubbard customers, that means we carry the common parts for these brands on our trucks, and when we don’t have a board or an arm, we know exactly who has it and how fast we can put hands on it. Most electric gate repairs in Hubbard are completed same visit.
Common Gate Repair Problems We See in Hubbard Homes
Hubbard’s mix of mid-century steelworker housing and lake-effect winters produces a specific set of gate failures. These are the four we see every week across 44425:
- Frost-heaved hinge posts: Posts set in shallow 1950s footings shift a few inches every winter. The gate starts dragging in March, and adjusting hinges fixes it for about three weeks before it sags again. The only real fix is a new deep footing and a square re-hang. We dug into a shared driveway off Hall Avenue last spring where the original footing was 18 inches deep and cracked in three places.
- Rust-weakened rack and pinion on slide gates: Years of lake-effect salt spray and no grease means teeth snap off the rack when a new operator gets bolted on. If you skip the track and rack inspection before replacing a slide motor, you’ll be replacing the new motor’s gearbox next year.
- Operators dying on narrow shared driveways: A swing gate operator on a 9-foot-wide driveway with a shared right-of-way is a blown fuse waiting to happen. If the gate can’t complete its full arc without hitting a fence or a neighbor’s car, the motor strains, strips gears, and fails early. Compact slide operators and properly set open limits fix what adjusting the force settings never will.
- Weld failures at the hinge plates: Iron and steel gates built in the 1940s and 1950s were welded with equipment that’s now seventy years old. Weld lines crack from decades of freeze-thaw expansion and contraction. We see this constantly on Hubbard’s ornamental iron gates near the older streets. The fix is grinding back to clean metal and re-welding with modern rod, usually with a gusset plate for extra support.
Pricing for Gate Repair in Hubbard, OH
Here’s what we actually charge in Hubbard. Hinge and post repair runs $180 to $460 depending on whether we’re resetting one post or two, and how much digging and concrete is involved. Gate realignment is $120 to $260 for a standard residential gate. Electric gate repair in Hubbard runs $200 to $620 for most operator repairs, including boards, arms, motors, and safety edge replacement. Weld repair is $100 to $300 depending on how many inches of cracked weld we’re grinding out and re-laying.
The price you’re quoted on the phone or at the walkthrough is the price on the invoice. No trip charge inside the county. $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. And every job carries the 90-Day Done Right Promise in writing. Call (877) 610-2993. We’ll give you a straight price before any work starts.
We Also Serve Cities Near Hubbard
We work in Hubbard every week and also take calls from homeowners in Campbell, Girard, Struthers, and Youngstown. If you’re in one of those towns, the same crew and the same Gate Repair standards apply. If you’re not sure whether we cover your street, call and ask. The person answering will tell you straight.
Serving Hubbard, OH - Our Local Coverage Area
We’re based in the Hubbard area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Hubbard
Because the post the hinges are bolted to is moving. Hubbard’s frost-heaved post footings, many poured shallow in the 1950s and 1960s, shift a few inches every winter during Trumbull County’s freeze-thaw cycles. Adjusting the hinges re-levels the gate for a few weeks, but unless the post itself is reset on a deeper footing (36 inches is what we pour in Hubbard), the same sag returns every March. Call (877) 610-2993 for a free estimate; we’ll tell you whether the post is the problem before you spend anything.
Yes, in most Hubbard cases we can. Many Hubbard driveways are 9-12 feet wide with shared rights-of-way, so a swing gate that needs a full 90-degree arc doesn’t fit. We usually convert these to slide gates or install a compact swing operator with precisely set open limits and safety photocells so the gate never enters the neighbor’s space. We’ll measure your driveway, the gate’s current arc, and the right-of-way before recommending anything. Estimates are free at (877) 610-2993.
Thirty-six inches minimum. That gets the footing below Trumbull County’s typical frost depth. Most original Hubbard gate posts we dig up are set 18 to 24 inches deep, which is exactly why they heave. We pour a 36-inch sonotube footing with rebar and set the post in it, and on Hubbard’s older chain-link gates we typically replace the post entirely rather than reusing a rusted one.
Often we can weld it, and that’s our preference. We grind back to clean metal, fit a reinforcing plate over the rusted section, and weld the hinge back on. If the post itself is rotted below grade or the frame is too thin to take a weld, replacement is the honest call, and we’ll show you exactly why with the old part in your driveway. Either way, the fix happens on site. Call (877) 610-2993 and we’ll tell you what we’re dealing with after one look.
You need them. Every automatic gate, residential or commercial, should have functioning safety photocells and proper force settings, especially on Hubbard’s narrow shared driveways where a gate can hit a car or a pedestrian if it closes at the wrong moment. We install and calibrate photocells as part of every automatic gate repair we do. If your gate’s photocells are disconnected or bypassed, we’ll fix that before we call the job done.
Call Gatewood Fence & Gate for Gate Repair in Hubbard, OH
When your gate stops working in Hubbard, call (877) 610-2993. A live person answers, day or night. We’ll schedule a visit that works for you, give you a written price before any work starts, and stand behind it with the 90-Day Done Right Promise. Hal Gatewood’s name is on the shop and on every invoice. His crew serves Hubbard every week, and the same workers who answer your questions are the ones who fix your gate. Call now for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hubbard since 2001.