Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Hubbard
Gate parts and welding in Hubbard, OH usually means one of two things: a gate that sagged over the winter and won’t latch, or a hinge that finally let go after sixty years of Trumbull County frost cycles. Most jobs we see in the 44425 zip code run $180 to $480 for hinge and latch work, and $350 to $900 when a post needs to be reset in a deeper footing. We’re Gate Parts & Welding specialists who weld on site in your driveway, not in some shop across the county. Call us at (877) 610-2993 and a live person picks up, day or night.
Hubbard isn’t a place where you can afford to guess about a gate. These yards were built for steelworkers, and the gates that came with them were built to last about four decades. Most have now seen six or seven. That’s exactly the kind of Gate Installation - Hubbard work we do, and we’ve been at it since 2001.
Why Gatewood Fence & Gate Is Hubbard’s Preferred Gate Parts & Welding Company
Hal Gatewood started this business in 2001 with a welder in his truck and a simple rule: fix the gate in the driveway, and stand behind the work in writing. That’s still how we run things in Hubbard. The name is on the shop, and if you want to drive up and look Hal in the eye before you hire us, you can. Not many gate companies around the Mahoning Valley can say that anymore.
We answer our own phone. Every call, every hour. You won’t get a voicemail tree or a person reading a script in another time zone. The person who answers is someone who works on gates, and when you call about a sagging swing gate on a 1950s ranch off Route 62, we know what those post footings look like before we even pull into the driveway.
Every job we do in Hubbard carries our 90-Day Done Right Promise, written on the invoice. If something isn’t right, one call brings us back. That’s not a warranty buried in fine print. It’s a promise from a guy whose name is on the truck.
Our Gate Parts & Welding Services in Hubbard
Hinge Replacement
Hinges on Hubbard gates take a beating. Lake-effect snow piled against the post all winter, then thirty or more freeze-thaw cycles work the metal until it seizes or snaps. We replace old cast hinges with heavy-duty barrel or weld-on hinges, and we always check the post before we hang a new hinge on it. A new hinge on a post that’s leaning three inches out of plumb is a waste of your money.
Post Replacement
This is the job Hubbard homes need more than any other. Gate posts set in the 1950s and 60s usually sit in shallow concrete, maybe eighteen inches deep. Enough for a decade or two. After sixty years of Trumbull County frost heave, that post has shifted. In Hubbard, hinge replacement often becomes post replacement once we dig down and see what’s really holding the gate. We set new posts in deeper footings and weld the hinge brackets on true.
Rail Repair
Chain-link gates get their strength from the top rail and the tension wire. When a rail kinks or the tension band pops, the whole gate flexes and the latch stops lining up. We straighten or replace rails, re-tension the fabric, and check the frame for cracks that started at the weld points. Most rail repairs in Hubbard run $120 to $280, and they usually extend the life of the gate by years.
Custom Welding
Some gates can’t be fixed with off-the-shelf parts. Ornamental iron gates from the 1940s and 50s have scrollwork and brackets that nobody stocks anymore. We weld custom replacements on site, fabricate brackets to match the original design, and repair cracked frames without hauling your gate away. Hubbard homeowners call us when the local hardware store says the part doesn’t exist. We make it exist.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hubbard
We service and retrofit Hubbard Gate Motor & Opener systems from FAAC, BFT, Linear, and Viking, plus five other major gate brands. If your 1980s operator has a control board that’s no longer supported, we’ll tell you straight whether it can be retrofitted with modern safety photocells or whether you’re better off putting that money toward a new unit. We keep common parts for these brands on the truck, which means fewer trips back and forth and a gate that works the same day it broke.
Common Gate Parts & Welding Problems We See in Hubbard Homes
- Frost-jacked hinge posts. Hubbard’s older neighborhoods are full of posts set shallow in the 1950s and 60s. Every spring, those posts heave a little more, and the latch side of your gate drops until the bolt won’t line up. A hinge replacement alone won’t fix it because the post itself has moved.
- Seized cast hinges on original steel hardware. Rust gets into the barrel of an old hinge and welds it solid. The gate still moves, but only because it’s twisting the post or bending the frame. By the time it’s visibly sagging, you’re looking at frame work, not just a hinge swap.
- Obsolete control boards with no replacement parts. Pre-entrapment-era operators from the 1980s and 90s fail, and the board that died is no longer made. Sometimes we can retrofit safety components. Sometimes the honest answer is a new operator, and we’ll tell you which one before anyone spends a dollar.
- Latch misalignment after freeze-thaw cycling. Hubbard gets 30 or more freeze-thaw cycles a year, and each one nudges posts, gates, and latches a fraction of an inch. By March, latches that worked in November won’t close. That’s why spring is our busiest season in Hubbard.
Pricing for Gate Parts & Welding in Hubbard, OH
Here are honest numbers for the Hubbard market. Hinge replacement on a chain-link or ornamental gate runs $180 to $340. Post replacement runs $350 to $900 depending on footing work and whether we’re digging through frozen or rocky ground. Rail repair runs $120 to $280. Custom welding runs $95 to $180 per hour, and small fabrication jobs usually land between $150 and $450. Operators get priced by the brand and the safety features, but a new operator with photocells and a loop detector starts around $1,100 installed.
You’ll get a written quote before we start, and that’s the price. Not an estimate that grows. We also take $40 off any repair over $200, and there’s no trip charge inside the county. Seniors and veterans get 10% off permanently. If another company gave you a written estimate, bring it in and we’ll give you a free second opinion on it.
We Also Serve Cities Near Hubbard
Our crews work throughout Trumbull and Mahoning counties. You’ll find us in Gate Parts & Welding jobs in Campbell, Girard, Struthers, and Youngstown any given week. If you’re in a neighboring town and your gate quit, the same crew that handles Hubbard will come take a look. Same pricing, same written promise.
Serving Hubbard, OH - Our Local Coverage Area
We’re based in the Hubbard area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Hubbard
The gate is sagging because the hinge post is moving, not because the hinges are worn. Hubbard’s older homes sit on posts set in shallow 1950s and 60s footings, and Trumbull County’s 30+ freeze-thaw cycles heave those posts a little further out of plumb every winter. You can put new hinges on a post like that, but the post will keep moving and the gate will keep sagging. The real fix is resetting the post in a deeper footing, then hanging new hinges on a post that’s actually standing straight. Call (877) 610-2993 and we’ll come check the post before anyone sells you a hinge.]
Usually yes, if the control board still works and accepts external entrapment protection inputs. We retrofit FAAC, BFT, Linear, and Viking operators regularly. If your board is one of the obsolete ones with no current replacement support, we’ll tell you that too, and show you what a new, safer unit costs. There’s no charge for an honest answer.
Look at the post, not the gate. If the post is visibly leaning, if the concrete at the base is cracked and lifting, or if the gate used to latch fine and now misses the latch by an inch or more, the post has moved. Dig down six inches and you’ll usually find the old shallow footing that caused it. A post that’s moved will keep moving. Replacement is the honest answer. Call us at (877) 610-2993 for a free look.]
We weld in place whenever possible. That means your ornamental gate stays in your Hubbard driveway, and we work around it. For major frame reconstruction or scrollwork fabrication, we may need to lay the gate down on sawhorses in your yard, but it doesn’t leave your property. Hauling a gate to a shop adds time and cost, and we’d rather not do that to you.
We set a new cantilever or track-system post, frame the gate for slide operation, and install a roller carriage with Gate Access Control in Hubbard matched to the gate’s weight and width. Most conversions in Hubbard run $1,500 to $3,200 depending on gate size and whether we’re reusing your existing chain-link fabric or building new. We’ll give you a written price before anything starts, and the 90-Day Done Right Promise covers the whole job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hubbard since 2001.