Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Hernando, MS
Gate repair in Hernando typically costs $180-$450 for common fixes like hinge replacement, post resetting, and opener troubleshooting, and most jobs can be scheduled within 24 to 48 hours. We’re the local shop that answers the phone with a live person, not a voicemail tree, and the person who shows up knows why your gate dragged the apron last March. If your gate won’t close, sags at one end, or the opener just clicks and hums, call us at (877) 610-2993 and we’ll give you a straight answer on what it needs and what it costs.
Hernando sits at the center of DeSoto County’s Memphis-commuter suburban boom, and most of the housing stock was built between roughly 1993 and 2015 as upper-income Memphis families moved across the state line. Those estate-style subdivisions made automatic driveway gates a near-standard feature, and now thousands of those gates are hitting their first major repair cycle simultaneously. The clay soil here doesn’t forgive shallow footings or sloppy welding, and we’ve been fixing the consequences since 2001.
Why Hernando Homes Are Different
The bulk of Hernando’s housing stock consists of large-lot suburban homes built from roughly 1993 to 2015, and these properties commonly feature ornamental aluminum or powder-coated steel automatic driveway gates. A smaller core of older homes surrounds the historic courthouse square, where traditional wooden privacy gates and vintage wrought iron are more typical. The work we do on a 1998 estate gate off McIngvale Road is different from what we do on a wrought iron walk-through near the square, and we adjust for both.
The real difference maker is the ground itself. North Mississippi’s shrink-swell clay expands through wet winters and contracts in dry summers, and it doesn’t do it evenly. Every spring, we see the same spike: posts that heaved through January and February settle off plumb in March, leaving gates that latched fine in October dragging the driveway apron by April. Hernando’s humid subtropical climate drives rapid oxidation on iron and steel, and the area sits in the winter ice-storm corridor that runs from Memphis southward. Occasional glazing ice events add sudden mechanical shock to hinges, weld points, and automatic openers already stressed by summer heat expansion. A gate repair in Hernando that ignores the soil or the climate is a repair that won’t last.
We work all over the 38632 zip code, from the subdivisions off McIngvale Road and Byhalia Road to the older streets around the historic courthouse square and the properties along Robertson Gin Road. Response time across Hernando is typically same day when called in the morning, and we’ll tell you honestly if the parts need to be ordered before we commit to a time.
Gate Repair in Hernando
Gate repair in Hernando usually starts with the post and the hinge, not the motor. That’s where we begin. The expansive clay-heavy soils throughout this part of north Mississippi shift aggressively between wet winters and dry summers, pushing posts out of plumb and misaligning gate frames in ways that would not occur in the sandier soils of other Mississippi regions. We fix the gate in your driveway rather than hauling it off, and every repair carries our 90-Day Done Right Promise in writing.
Electric Gate Repair
When a driveway gate opener stops responding in Hernando, the first thing we check is whether the control board took a hit from a power surge. DeSoto County gets its share of electrical storms rolling in from the Memphis side, and a spike on the line can scramble a board or pop a capacitor without any visible damage. We troubleshoot the whole circuit, not just the part that’s obviously dead. If it’s a Viking or Ghost Controls board, we’re certified to service it and can usually have parts within a day or two. Electric gate opener repair in Hernando typically runs $250-$600 depending on brand and board availability.
Hinge and Post Repair
Hernando’s clay soil is the hidden culprit behind a lot of hinge work. A gate sags in the hinge post, not in the middle, and that is where we start. When the post has moved even a few degrees out of plumb over a wet winter, the hinges carry extra load and wear faster. We reset posts in concrete, weld cracks in the hinge brackets, and realign the frame so the gate stops dragging and stops wearing out parts prematurely. Post reset or plumb repair in Hernando runs $285-$650 depending on concrete removal and footing depth.
On-Site Weld Repair
After a couple of years of shifting soil in north Mississippi, a gate that once latched cleanly starts hitting the post too early or springing open on its own. Show us a gate closing on its own and we’ll show you where it’s failing. Realignment in Hernando usually means adjusting the hinge plane, squaring the frame, and sometimes cutting and re-welding a sagged picket section. We do it with the gate in your driveway, not hauled off to some shop. On-site weld repair, including rust treatment and paint, runs $150-$400. Gate Repair is what we’ve built this business on, and we still approach every job that way.
How fast can you get to a gate repair in Hernando?
In most Hernando neighborhoods, we can have someone at your gate within 24 to 48 hours for non-emergency repairs, and the phone is answered by a live person around the clock if you’re looking at a gate that won’t close at all. If it’s an emergency and the gate is stuck open or blocking the driveway, tell the person who answers and we’ll work you in sooner. Call (877) 610-2993 for timing.
How much does gate repair cost in Hernando compared to nearby cities?
Hernando pricing runs about the same as Southaven and Olive Branch. You’re looking at $180-$450 for most repairs, and the real cost driver is whether a post has shifted and needs to be reset. A gate off its hinges runs less. A gate whose post has moved with the clay soil runs more. We quote the full price before any work begins, and repairs over $200 get $40 off.
Gate Installation in Hernando
A custom driveway gate in Hernando needs to survive two things: punishing clay soil and a humid climate that eats cheap steel. We’ve been building and installing gates that stand up to both since 2001. The person who looks at your property will be Hal himself or a member of his crew who has done this work in DeSoto County for years, not a subcontractor or a salesman with a tablet.
Driveway Gate Installation
Most of Hernando’s estate-style homes off McIngvale Road and Byhalia Road have wide driveway openings meant for an automatic gate. We fabricate ornamental aluminum and powder-coated steel driveway gates to match the house, then set them on footings deep enough to resist the shrink-swell cycle that tilts shallow posts by March. A basic single swing driveway gate with a powder-coated steel frame typically runs $2,800-$5,500 installed, depending on width and whether we’re reusing your existing opener.
Double Swing Gate Installation
Double swing gates are the signature look in Hernando’s newer estate subdivisions, and for good reason. They frame the driveway the way the house deserves. But a double swing gate is only as good as its hinge posts. We pour footings 42 to 48 inches deep when the soil calls for it, because the clay at 24 inches will heave a 600-pound gate enough to separate the latch points by spring. A double driveway gate in a Hernando estate subdivision runs $5,000-$9,500 installed.
Sliding Gate Installation
On Hernando lots where the driveway slopes toward the street, a swing gate can bind or catch the crown of the road. A sliding gate solves that. We fabricate cantilever and track-style sliding gates, and we spec the operator for the extra load a cold January morning puts on the rack and pinion when ice glazes the track. A sliding gate on a sloping Hernando lot runs $6,000-$11,000 because the track, the cantilever hardware, and the heavier operator all cost more. Gate Installation is scheduled, measured, and built to order, never rushed to fit a same-day timeline.
Why do so many Hernando driveway gates start sagging every March?
Hernando sits on expansive clay soil that swells through the wet winter and shrinks in the early spring dry-out. The posts under your driveway gate get pushed and pulled unevenly through that cycle, and by March the hinge posts have tilted enough that the gate leaves drag and the latch points do not line up. It is not the gate’s fault. It is shallow footings set in reactive soil. We set posts at 42 to 48 inches deep with proper drainage.
Can you install a sliding gate on a Hernando lot where the driveway slopes toward the street?
Yes, and it is often the right answer. On a Hernando driveway that slopes toward the road, a swing gate can bind on the crown or catch the apron. A sliding gate travels along the driveway instead of over it, so the slope matters less as long as the track is set correctly. We build cantilever sliding gates for Hernando lots where the slope complicates things, and we spec heavier operators for ice load.
Gate Motor & Opener in Hernando
When your driveway gate stops opening on a Monday morning in Hernando, the whole day tilts sideways. You’re already running late for the drive up I-55 toward Memphis, and now there’s an automatic gate sitting dead between you and the road. Most Hernando gates that fail on us are between 15 and 30 years old, which lines up with the wave of estate-style subdivisions built across DeSoto County from the early 1990s through the mid-2010s.
Motor Installation
Putting a new motor on an old gate is about more than bolting on a box. The gate has to be plumb, the hinges have to move freely, and the weight has to be balanced before the motor ever takes a load. We install and calibrate motors for single and double swing gates and for slide gates across Hernando, from the larger lots off Byhalia Road to the older residential streets around the square. A typical motor installation in Hernando runs $1,100-$2,800, depending on gate weight, brand, and whether the frame needs realignment first.
Motor Repair
Most motor failures in Hernando follow a pattern: a gate slowly falls out of alignment, so the motor works harder every cycle until a gear strips, a capacitor burns, or the board throws an error code. We trace that chain back to the source before we replace anything. A straightforward motor repair in Hernando runs $180-$500, and we fix more than we replace. The clay soil here means we often find the real problem is in the post, not the motor.
Slide Motor Service
Slide gates carry a lot of weight on a track, and they’re unforgiving when the concrete pad underneath shifts even a quarter inch. Hernando’s clay soil does exactly that. A slide motor that’s suddenly grinding, stopping mid-travel, or tripping its safety sensor is often fighting an alignment problem in the track or the V-wheels, not a motor problem at all. Slide motor repair in Hernando typically falls between $250-$650. Gate Motor & Opener service means we check the full system, not just the box that failed.
Do you fix a gate motor after a power surge or lightning strike?
Yes, we regularly replace fried control boards, transformers, and surge-damaged openers in Hernando. North Mississippi gets its share of spring thunderstorms, and a near miss can cook a board without touching the motor itself. We’ll diagnose what failed and rebuild from there, and we never suggest a full replacement when a board swap or a capacitor does the job. Call (877) 610-2993.
What warranty do you give on gate motor work in Hernando?
Every job carries our 90-Day Done Right Promise in writing. If the motor repair or installation isn’t done right, one call brings us back to Hernando to make it right, no lecture, no invoice. Hal’s name is on the promise, and he still answers the phone.
Gate Access Control in Hernando
Gate access control in Hernando isn’t just about convenience. It’s about what happens when a 2004-era keypad goes dark on a Monday morning and you can’t get your own car out of the driveway. For Hernando homeowners, the most common culprit isn’t the keypad itself. It’s the clay under the gate post. That’s the thing most out-of-town companies miss entirely.
Keypad Entry Systems
A keypad entry system on a Hernando driveway gate has to survive two extremes: July humidity that corrodes circuit traces, and spring clay movement that torques the mounting post just enough to crack the keypad housing. We install keypads rated for outdoor exposure that can handle the freeze-thaw cycle, and we always check the post before we mount anything to it. A keypad entry system replacement in Hernando typically runs $280-$520 including the keypad, wiring check, and programming.
Remote Control Systems
Remote controls for Hernando gate operators fail in predictable ways. The transmitter battery is the cheap fix. The receiver board dying after a hot August is the expensive one. We diagnose the difference in minutes, and we don’t sell people a new operator when the fix is a $40 receiver replacement. Remote control replacement and programming runs $60-$180, depending on the operator and the number of remotes.
Phone Entry and Card Readers
Phone entry systems are common on larger Hernando lots where the gate sits far from the house. The common failure isn’t the phone module itself; it’s the surge that comes from summer thunderstorms rolling through DeSoto County and taking out the low-voltage wiring between the house and the gate. We install surge protection on the phone entry circuit as standard, not as an add-on. A phone entry system install runs $400-$900. Card reader installation runs $350-$750. Gate Access Control is only as reliable as the post it’s mounted on, and we check that first.
Why does my Hernando gate keypad only work in the winter and not the spring?
The keypad itself is probably fine. Hernando sits on expansive clay that absorbs winter moisture and swells, then dries and shrinks in spring. Your gate posts move with it, and the post holding the keypad or the strike has shifted slightly out of alignment. The keypad sends the signal, but the latch can’t physically align to catch. We fix this by resetting the post and realigning the gate frame, not by selling you a new keypad.
Can you retrofit a newer smart access system to my 2004 LiftMaster gate operator?
Usually yes. If the operator itself is still mechanically sound, we can add smart access control that lets you operate the gate from your phone without replacing the whole LiftMaster unit. The 2004-era LiftMaster operators in Hernando are generally built heavy, and many are worth keeping. The weak point is the old control board, which we can update to support modern smart access. We’ll be honest if the operator has reached its end.
Gate Parts & Welding in Hernando
Gate parts and welding in Hernando generally run $180-$650 depending on whether we’re replacing a hinge, rebuilding a post, or fabricating a custom component on site. Most repairs off McIngvale Road, Byhalia Road, or around the historic square are done the same day, because Hal keeps the shop stocked and the welder on the truck. If your gate drags the driveway or the post has gone out of plumb, we fix it where it sits.
Hinge Replacement
Hinge replacement in Hernando typically runs $180-$320 per hinge, and it’s the most common welding repair we do. When clay heave pushes a post out of plumb, the hinges take the load they were never designed to carry. We cut out the old hinge, grind the post clean, and weld a new one at the correct height and angle so the gate swings true.
Post Replacement
A gate sags in the hinge post, not in the middle, and around Hernando that post is usually being shoved around by shrink-swell clay. Post replacement costs $350-$650 depending on depth and gate weight. We remove the old footing, pour a deeper concrete base, and weld or bolt a reinforced post into place. Fix the panel without the post and you’ll fix it twice.
Rail and Custom Welding
Cracked or bowed rails on ornamental steel gates are common in Hernando because our humid winters push rust into the weld points, then ice storms stress the metal. Rail repair runs $150-$400 depending on whether we’re welding a crack, splicing a new section, or reinforcing the frame. Custom welding in Hernando runs $200-$800 depending on scope. We’ve built reinforcement plates, custom latch brackets, and matching rail sections for gates all over Hernando, and the work blends with the original. Gate Parts & Welding is how we save gates that other companies want to haul away.
Why does my gate latch fine in October but drag the driveway by March?
Hernando sits on shrink-swell clay that expands when wet and contracts when dry. Through a wet winter the clay swells and shoves your hinge post out of line; by spring the post has shifted enough that the gate drags or springs open. We fix it by digging out the old footing, pouring a deeper concrete base, and welding a reinforced post into place. Call (877) 610-2993 and we’ll look at it.
My ornamental steel gate is rusting at the weld points - do I need a whole new gate?
Almost never. Weld points rust first because the factory coating was burned off when the gate was originally welded, and Hernando’s humid winters put moisture right into that raw metal. We grind out the rust, weld the crack solid, and seal the repair so it holds. Replacing the whole gate usually isn’t necessary, and we won’t sell you one just to make the truck payment.
Brands We Service in Hernando
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for Viking, Ghost Controls, DoorKing, and Elite locally, which means most Hernando repairs don’t wait on shipping. If we need to order something, we’ll tell you before we schedule. our brands
Pricing for Gate Repair in Hernando, MS
| Service | Typical range in Hernando |
|---|---|
| Hinge replacement and hinge bracket repair | $180-$340 |
| Post reset or plumb repair | $285-$650 |
| Gate realignment and frame square-up | $220-$480 |
| Opener troubleshooting and board replacement | $250-$600 |
| On-site weld repair with rust treatment and paint | $150-$400 |
| Basic single swing driveway gate installed | $2,800-$5,500 |
| Double driveway gate installed | $5,000-$9,500 |
| Custom ornamental aluminum gate installed | $4,000-$8,000 |
| Sliding gate on sloping lot installed | $6,000-$11,000 |
| Motor installation | $1,100-$2,800 |
| Motor repair | $180-$500 |
| Slide motor repair | $250-$650 |
What pushes price up in Hernando specifically: post depth needed for clay soil, ice-storm damage to multiple components, and matching existing ornamental styles on older gates. The price you hear on the phone is the price on the invoice. We quote it, you approve it, and only then does the work start.
Neighborhoods We Serve in Hernando
We work across the 38632 zip code, from the estate subdivisions to the older neighborhoods around the square. Response time is typically same day when you call in the morning, and we don’t charge a trip fee anywhere inside DeSoto County.
- Hernando Hills
- McIngvale Road corridor subdivisions
- Love and Green T Road subdivisions
- Robertson Gin Road corridor
- Historic courthouse square area
Service Area - Cities Near Hernando
We coordinate dispatch and scheduling from our Memphis office, and crews serve Hernando locally every day of the week. We also work regularly in Horn Lake, MS, Southaven, MS, and Olive Branch, MS, so if you’re on the edge of Hernando near any of those lines, you’re still in our normal route. Hernando, MS is our home base for DeSoto County gate work.
Serving Hernando, MS - Our Local Coverage Area
Gatewood Fence & Gate crews serve Hernando and the communities around it; dispatch is coordinated from our Memphis office. The map shows the Hernando coverage area; if your address is on it, we can help.
Also serving nearby: Hernando, MS, Horn Lake, MS, Southaven, MS, Olive Branch, MS.
FAQs About Gate Repair in Hernando
Most gate repairs in Hernando don’t require a permit, but new installations or structural changes to the fence line may need DeSoto County approval depending on your HOA and setback rules. We know the local requirements and will tell you straight if your job needs paperwork before we start. Call (877) 610-2993 and we’ll walk you through it.
For emergency repairs where the gate is stuck open, stuck closed, or blocking vehicle access, we answer live 24/7 and will work you into the schedule the same day if possible. Non-emergency repairs are typically scheduled within 24 to 48 hours. Tell the person who answers exactly what the gate is doing and we’ll give you honest timing.
Yes. We regularly work in the estate-style subdivisions off McIngvale Road, Byhalia Road, and Holly Springs Road, plus the older homes near the historic courthouse square and properties out toward the county line. There’s no trip charge inside DeSoto County, so a gate off I-269 or further out costs the same to get us there.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hernando Customers Say
"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth