Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Hernando
Gate parts and welding in Hernando means dealing with a specific enemy: DeSoto County’s shrink-swell clay. When a powder-coated steel gate that closed perfectly in October starts dragging the driveway apron by March, the problem is almost never the gate itself. It’s the post underneath it, heaved out of plumb by a winter of wet clay expanding and shifting. Hal Gatewood has been fixing exactly this failure pattern since 2001, and he does the welding right in your driveway so the gate never leaves your property. Call (877) 610-2993 and you’ll get a live person, day or night.
If you live off McIngvale Road, in a subdivision near Getwell, or on one of the estate lots east of I-55, you’ve probably noticed that gates in Hernando fail on a timetable. Ice-storm season stresses the weld points. Spring heave drops the posts. Humidity does the rest. We know what to look for because we’ve wrenched on hundreds of these gates across 38632, and we bring the welding rig, the replacement hinges, the rollers, and the post-hole digger with us. No hauling your gate to some shop across the county line.
Why Gatewood Fence & Gate Is Hernando’s Preferred Gate Parts & Welding Company
The name on the shop is Hal Gatewood’s name, and the shop is close enough that you can drive there and look him in the eye if you ever want to. That’s the oldest accountability there is, and it matters even more in a place like Hernando, where word travels fast through the subdivisions and a bad gate weld gets talked about at the hardware store. We are Gate Parts & Welding specialists who repair first and replace only when it’s truly necessary, because we know the difference between a hinge that can be welded back to true and one that’s past saving.
Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print. We answer the phone with a live person 24 hours a day, seven days a week, and the person who shows up to your Hernando driveway is background-checked, uniformed, and works for the guy whose name is on the invoice. That matters when you’re letting a stranger with a welding torch near a gate that cost more than some cars.
We also know Hernando’s housing stock. The large-lot estate homes built from the mid-90s through the 2010s commonly have ornamental aluminum or powder-coated steel automatic driveway gates, and a lot of those gates were installed when the house went up. That means they’re aging into their first major repair cycle all at once, right now. The older homes around the courthouse square have a different set of problems, mostly vintage wrought iron and traditional wooden privacy gates that don’t have modern openers but still need careful welding work done right.
Our pricing is quoted up front and agreed before any work starts. We don’t change the number at the door. We offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. If you’ve got another company’s written estimate, we’ll give you a free second opinion. Your gate deserves a straight answer, and so do you.
Our Gate Parts & Welding Services in Hernando
Hinge Replacement
Most swing gates in Hernando sag because the hinge post has moved, not because the hinge itself wore out. We see it constantly on the clay-heavy lots off McIngvale Road and throughout the subdivisions that line the I-55 corridor. A Midwest clay soil that shrinks and swells through the wet winters and dry summers will push a post out of plumb by an inch or more, and that inch is all it takes for a 400-pound gate to start dragging. We remove the old hinges, weld in new tabs or full hinge assemblies, and set the post back to true before re-hanging the gate. If the post is beyond saving, we replace it and reset it with a deeper footing so it doesn’t heave the same way next winter.
Post Replacement
When clay heave has split a footing or driven a post so far out of alignment that no weld will hold it true, the post has to come out. We dig it, break out the old concrete, and set a new post with a footing deep enough to survive DeSoto County’s shrink-swell cycle. This is not a quick concrete pour and walk-away job. We re-weld the hinge tabs at the correct height, re-hang the gate, and test it through full open-close cycles while it’s still under load. A post replaced properly in Hernando means a gate that stays latched through the next winter and the one after that.
Rail Repair
Rails crack and split for two reasons in this climate: ice-storm shock and heat-expansion stress. The January ice that builds up on ornamental steel gates near Hernando adds sudden mechanical load to rail weld points that have been stressed all summer by expansion and contraction. When we repair a cracked rail, we grind back to clean metal, weld the break, and then reinforce the joint so it doesn’t fail in the same spot next season. For ornamental steel with scrollwork, we match the pattern as closely as the steel allows, because a big ugly bead across a decorative rail ruins the look you paid for when the gate went in.
Custom Welding
Some gates were custom-built when the house was new, and the scrollwork, finials, and frame geometry don’t match anything you can buy off a shelf. That’s what our welding rig is for. We fabricate replacement sections, repair broken ornamental work, and build the brackets or tabs that don’t exist as a catalog part. The goal is a repair that looks original, not a patch that advertises itself. Hal has been welding since 2001, and his crew has built and repaired enough custom gates around Hernando to know that the difference between a good weld and a shameful one is about two extra minutes of prep work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hernando
We’re certified to service nine major gate brands, and around Hernando we see a lot of FAAC, BFT, and Linear openers on the estate gates up and down the I-55 corridor. That matters because a gate that binds on a misaligned rail will chew through an opener motor in months, and if we’re repairing the gate side we also know how to test and adjust the operator so everything runs together. We stock common replacement parts for the brands we service, and we can get anything unusual fast. If your Viking or FAAC operator is running but the gate itself jerks and binds, that’s usually a mechanical problem, not an electrical one, and we can sort it out.
Common Gate Parts & Welding Problems We See in Hernando Homes
- Spring heave from DeSoto County clay. Hinge posts rise during wet winters and drop unevenly in spring, leaving gates that drag the driveway apron or spring open by mid-March. We fix the post, not just the panel, because fixing the panel without the post means you’ll fix it twice.
- Ice-storm weld fractures. Hernando sits in the ice-storm corridor running south from Memphis, and glazing ice adds sudden shock to weld points already stressed by summer heat expansion. We see the resulting cracks most often on ornamental steel frames and rail joints.
- Humidity-driven rust and paint failure. A humid subtropical climate accelerates oxidation on iron and steel gates across 38632. When paint fails and exposes a weld, that weld becomes the next thing to crack. We grind, treat, weld, and seal so the repair outlasts the surrounding steel.
- Rollers that bind on misaligned rails. When a post shifts, the rail shifts with it, and the roller assembly starts fighting the track. That’s not a roller replacement job. It’s a post and rail alignment job, and we do the welding work in place so everything lines up when we’re done.
Pricing for Gate Parts & Welding in Hernando, MS
Here’s what gate parts and welding actually cost in Hernando, based on the work we’ve done across 38632. Hinge replacement on a residential swing gate typically runs $240 to $480 per hinge, including the weld work and re-alignment. Post replacement runs $380 to $850 depending on post size, footing depth, and how much old concrete has to come out. A rail repair on ornamental steel is usually $180 to $400, depending on the length of the crack and the amount of scrollwork involved. Custom welding work is quoted by the hour at $95 to $135, and most custom jobs fall between $200 and $600. Rollers and latch hardware run $60 to $160 installed. Every price is quoted up front and agreed before we start, and the quote is the quote. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Hernando
Our Gate Parts & Welding in Hernando crew also covers Horn Lake, Southaven, and Olive Branch. If you’re on the north side of the county line or out near the state border, the same 90-Day Done Right Promise applies. Same owner, same crew, same phone number.
Serving Hernando, MS - Our Local Coverage Area
We’re based in the Hernando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Hernando
The clay under your hinge post is the culprit. Hernando’s shrink-swell clay absorbs water all winter, heaving the post upward, then dries out in spring and drops it unevenly. That cycle leaves the post out of plumb and the gate dragging the driveway apron or springing open by March. The fix is resetting the post with a deeper footing and re-welding the hinge tabs at the correct height, not just adjusting the latch. We do this work every spring across Hernando. Call (877) 610-2993 and we’ll come out and take a look.
Yes. We weld replacement sections in place and match the scrollwork pattern as closely as the existing steel allows. A rail repair on ornamental steel doesn’t have to look like a patch job, and Hal prides himself on work that doesn’t advertise itself. We grind back to clean metal, weld the break, and reinforce the joint before re-painting. If you’ve got a custom gate with matched finials or a specific curve profile, call (877) 610-2993 and describe what you’re seeing, and we’ll tell you honestly whether it can be welded or needs a fabricated replacement section.
For heavy gates on Hernando’s expansive clay, we recommend weld-on steel hinges with adjustable or replaceable bushings, set into a post with a footing at least 36 inches deep. The hinge itself needs to be able to tolerate a little post movement without binding, because even a properly set post will shift a fraction of an inch over a wet winter. We weld the tabs at the correct height and re-align the gate after the post is set, then test the full open-close cycle under load. If your current hinges are the weak link, we’ll tell you that too.
Usually yes, and it’s usually the rail alignment, not the operator. When a post shifts on Hernando clay, the rail moves with it, and the rollers start fighting the track. The operator motor keeps running, so it looks like an electrical problem, but the real issue is mechanical: a misaligned rail or a post that’s moved out of plumb. We identify where the binding is, weld or re-align the rail as needed, and reset the post if that’s the source. The opener won’t have to work against the gate anymore. Call (877) 610-2993 and describe the jerking motion, and we’ll tell you what we think before we even come out.
Yes, and those jobs are some of our favorites. The older homes around the historic courthouse square have wrought iron and traditional wooden gates that predate modern openers, and the metal work often has hand-forged details you can’t buy anymore. We repair the original iron when we can, weld in discreet replacement sections when we can’t, and take care to match the joinery style of the original blacksmith. A vintage gate shouldn’t be replaced just because it’s old. It should be welded by someone who respects the age of it. For a free evaluation, call (877) 610-2993.
If your Hernando gate is sagging, cracked, or dragging and you want a straight answer from someone who welds on site and stands behind the work, call (877) 610-2993. The quote is free, the price is up front, and the work carries a 90-Day Done Right Promise in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hernando and DeSoto County since 2001.