Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hastings-on-Hudson
Gate repair in Hastings-on-Hudson usually costs between $185 and $650 depending on whether we’re talking about a welded hinge, a sagging panel, or a full operator replacement, and most jobs are done in one visit. Hal Gatewood has been fixing gates since 2001, and the crews know these hillside streets well enough to tell you what’s actually wrong before they even park the truck. Call (877) 610-2993 and a live person answers, day or night, not a recording.
What matters here isn’t just the repair. It’s the grade. Hastings-on-Hudson’s elevation drops roughly 350 feet from the Saw Mill River Parkway ridge down to the Hudson River in less than a mile, so a high share of driveway gates are installed on slopes steeper than 15%. Standard flat-ground swing gates bind or dig in after their first winter here. We account for that from the first bolt.
You can drive to the shop and look Hal in the eye, or he’ll be there himself. The name is on the shop, and the shop is down the road, which is the oldest accountability there is.
Why Gatewood Fence & Gate Is Hastings-on-Hudson’s Preferred Gate Repair Company
Homeowners in Hastings-on-Hudson call us because we repair gates other companies want to replace. If your ornamental iron gate has original hardware from the 1920s, we fix the hardware. We don’t haul the gate off and come back with an aluminum panel that looks wrong on a hillside Victorian. Our Gate Repair team welds on site, in your driveway, so the gate stays where it belongs.
Response time to Hastings-on-Hudson is typically same-day for repair calls, and since we coordinate scheduling from our New York City office with crews serving the village locally, you’re not waiting on someone from three counties away. Every call is answered by a live person, 24/7. No voicemail tree, no call center. You get Hal or someone who works directly with him.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings him back. No runaround, no “we’ll see what we can do.” That’s stated plainly because we mean it plainly.
Our Gate Repair Services in Hastings-on-Hudson
Electric Gate Repair
Electric gate operators around Hastings-on-Hudson work harder than they should have to. When a gate binds on a sloped driveway, the motor pulls more amps, trips its thermal breaker, and eventually burns out. We diagnose whether the operator failed on its own or was killed by a hinge post that shifted, and we fix the root cause. Replacing a motor without fixing the binding is a repair you’ll pay for twice.
Automatic Gate Repair
Automatic gates here face two local enemies: frost heave and river air. On Euclid Avenue, where the hillside slopes toward the old Anaconda site, we serviced a LiftMaster swing gate that had pulled its post footing forward after two winters of frost heave. The safety photocell kept re-tripping because the gate edge dragged on the uphill concrete. Our crew reset the post in a deeper footing, added stainless steel wedge anchors, and changed the hinge geometry with a tapered bottom pivot so the panel clears the grade through the full open arc. That’s slope-compensation work, and it’s what separates a lasting repair from a repeat visit.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. In Hastings-on-Hudson, iron and steel posts set in concrete footings heave and shift through the freeze-thaw cycles that come off the Hudson. We reset posts, replace corroded pins, cut out rusted sections of post and weld in new stock, and bed everything deeper than the original installer bothered to go. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Gates on sloped approaches, the kind you find throughout the hillside neighborhoods above the old Anaconda Wire plant site, need geometry that accounts for the grade. A swing gate that drags on the uphill side, binds at the lower hinge post, or won’t stay latched usually has a grade-compensation problem, not a panel problem. We re-work hinge pivots, adjust leaf alignment, and sometimes re-arch the bottom rail so the gate clears the driveway through its full arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hastings-on-Hudson
We’re certified to service nine major gate brands, and in Hastings-on-Hudson we work most often on FAAC, BFT, and LiftMaster operators, along with Linear and Viking on smaller systems. Since we’re local to the metro area, we can usually have the right parts in hand the same day, which means less time with your gate stuck open or closed. We don’t push brand replacements when a repair is the right call. If your FAAC board can be rebuilt or your Viking arm adjusted, that’s what we recommend.
Common Gate Repair Problems We See in Hastings-on-Hudson Homes
- Frost-heaved post footings on hillside driveways that shift the hinge post out of plumb, throwing the gate off level and overloading the operator. We see this most on the steep streets where the original concrete wasn’t poured below the frost line.
- River-air rust at welded joints and bracket mounts that looks like surface corrosion but hides pinholing underneath. Proximity to the Hudson adds persistent ambient moisture, and painted steel frames near welds are usually the first place it shows.
- Loop detector failures from water intrusion in driveway saw cuts that weren’t properly drained. During the wet winter cycles, water seeps into the cut, shorts the coil, and leaves the gate stuck in position. We re-cut, reseal, and replace the loop so it holds through the next rainy season.
- Original hardware on Edwardian and Victorian gates that’s no longer manufactured and needs period-matched repair rather than modern replacement. In this village, owners don’t want the character swapped for a big-box panel, and we agree with them.
Pricing for Gate Repair in Hastings-on-Hudson, NY
Here’s what to expect. Hinge and post repair in Hastings-on-Hudson typically runs $185 to $420, depending on whether it’s a reset or a full replacement with new concrete. Gate realignment on a sloped driveway is usually $225 to $480. Weld and rust repair runs $150 to $350 per section, and a full electric operator replacement lands between $550 and $1,800 including labor, depending on the brand and the weight of the gate. The price is quoted and agreed before any work starts. No one shows up and pads the invoice at the door.
You’ll get a written estimate first, and since we don’t charge a trip fee inside the county, you’re not out anything for the visit. We also offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a number before we touch a wrench.
We Also Serve Cities Near Hastings-on-Hudson
Our crews regularly work in Dobbs Ferry, Tuckahoe, Scarsdale, and Yonkers, so if you’re just outside the village line, you’re still in our service area. For more detail on our full coverage and what Gate Repair in Hastings-on-Hudson includes when it comes to local response and scheduling, give us a call. We know these streets.
Serving Hastings-on-Hudson, NY - Our Local Coverage Area
We’re based in the Hastings-on-Hudson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Hastings-on-Hudson
Frost heave lifts the outer corner of the gate, which shifts the lower hinge post out of plumb and pulls the panel down toward the driveway surface. When the ground freezes and thaws through the winter, the footing moves enough to bind the gate on the high side. We fix it by resetting the post in a deeper footing, using stainless steel wedge anchors, and reworking the hinge geometry so the panel clears the grade through the full arc. Call (877) 610-2993 and we’ll take a look before the next freeze.
On grades steeper than 15%, you want cantilever hardware, V-track rollers, or a swing gate with a tapered bottom pivot and arched bottom rail, depending on the gate style and weight. Standard flat-ground hinges and posts fail here because they don’t account for the ground movement. We spec hardware based on the actual slope of your driveway, not what fits on paper.
Most of the time, it’s fixable. Surface rust near welded joints is normal on iron gates close to the Hudson, but the real question is whether pinholes have formed through the steel. We grind back the rust, inspect the metal thickness, and weld in new stock where needed before refinishing. If the original hardware is still sound, we restore it. You rarely need a new gate unless the frame has rotted through.
Repetitive operator burnout in Hastings-on-Hudson is almost always a binding gate, not a bad motor. When frost heave shifts the hinge post, the operator pulls more amps to move the panel, trips its thermal breaker, and eventually burns out. We fix the gate’s movement first, then rebuild or replace the operator. A new motor on a binding gate is a repair you’ll be paying for again next year.
Yes. We repair original hinges by removing the rust, assessing the pin wear, and rebuilding what’s salvageable. If a section has cracked or sheared, we weld in matching new stock and work it to match the period look. Most village homeowners with Edwardian or late-Victorian gates want the hardware kept, and we do that. Call (877) 610-2993 and Hal will come look at what’s there before anyone recommends a replacement.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hastings-on-Hudson since 2001.