Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Hastings-on-Hudson
Gate parts and welding in Hastings-on-Hudson usually come down to one of three jobs: a hinge post that has heaved out of its footing, a weld that has rusted through at the joint, or a period gate that needs a repair matched to its original hardware. Most of these calls we can reach the same day from our scheduling office in New York City, with a crew that knows the hillside streets above the Hudson. Call (877) 610-2993 and you’ll get Hal or one of his crew on the line, not a recording.
What separates a lasting gate repair in this village from a temporary patch is understanding what the river does to steel. Hastings-on-Hudson sits right on the Hudson’s east bank, and the combination of persistent humidity, salt air, and hard freeze-thaw cycling each winter attacks gate hardware faster than almost anywhere else in Westchester. We have been fixing gates here long enough to know which failures repeat and which fixes hold.
Why Gatewood Fence & Gate Is Hastings-on-Hudson’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and his name is still on the door and on every invoice. That matters to homeowners in Hastings-on-Hudson who have been burned by a national outfit that quoted one number over the phone and handed them another at the driveway. When we quote a price, that is the price. You agree to it before any work starts, and the 90-Day Done Right Promise is written on the paperwork, not buried in fine print.
We answer the phone with a live person 24 hours a day, seven days a week. No voicemail tree, no call center three states over. If a gate is stuck open or jammed shut in the middle of the night, someone picks up and someone comes out. For Hastings-on-Hudson homeowners, that means a crew that already knows the difference between a grade problem on a hillside off Farragut Avenue and a simple hinge swap down near the waterfront.
Our reputation in this village is built on repair-first work. We weld on site, in your driveway, rather than hauling the gate away for a week. We fix what is actually broken and do not swap parts that still have years left in them. The Gate Parts & Welding team carries steel stock, stainless fasteners, and hinge blanks on the truck, so most jobs finish the same day we start.
Our Gate Parts & Welding Services in Hastings-on-Hudson
If you live in Hastings-on-Hudson, the gate at the top of your driveway is not just an entrance. It is a moving structure bolted to a hillside, and the hillside moves. Here are the four jobs we handle most often in the 10706 zip code.
Hinge Replacement
Hinges on hillside gates in Hastings-on-Hudson carry more weight than hinges on flat ground ever do. A gate that swings on a grade pulls against its top hinge constantly, and when the post starts to lean from frost heave, the hinge takes the punishment. We replace worn hinge pins and barrels with heavier stainless stock, then set the gate so it swings clear of the grade through its full arc. If the hinge post itself has moved, a new hinge alone will not save it, and we will tell you that before we do the work.
Post Replacement
This is the most common structural repair we do in Hastings-on-Hudson, and the one flat-terrain contractors miss. A gate post set in a shallow concrete footing will heave out of the ground after a few Hudson River winters. We cut out the old footing, dig deeper, set the new post on a proper gravel base, and pour the concrete to grade. Then we weld a new hinge bracket and realign the gate. In this village, post replacement often solves the problem that three hinge repairs could not.
Rail Repair
Wrought iron and steel gate rails rust from the inside out, especially near the river. The bottom rail on a swing gate sits closest to damp ground and salt spray, and it is usually the first section to fail. We cut out the rotted section, weld in new steel matched to the original profile, and then treat the whole rail so the repair does not become the next weak point. For period gates, we match the repair to the existing design rather than patching it with whatever is on the truck.
Custom Welding
Many of the Victorian and Edwardian homes in Hastings-on-Hudson have gates that were made by a blacksmith who is no longer around. When a scroll breaks or a latch bracket tears loose, there is no off-the-shelf replacement. We weld custom brackets, repair ornate scrollwork, and fabricate new pieces to match what is already there. The work happens in your driveway, and the repair is finished and painted before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hastings-on-Hudson
For automatic gates, we service and repair the brands most common in Hastings-on-Hudson, including FAAC, BFT, and Linear. We keep mounting brackets, capacitor kits, and control board components for these units on hand, which means a cheaper fix and a faster one. If your gate operator was installed years ago and the manufacturer no longer supports it, we can usually adapt current parts to the existing frame. That beats ripping out a working operator because a plastic gear wore down.
Common Gate Parts & Welding Problems We See in Hastings-on-Hudson Homes
After more than two decades working on gates in this village, here are the failures we see over and over:
- Frost-heaved hinge posts. Hudson River moisture seeps into concrete footings, freezes, and lifts the post. The gate then drags on the driveway or binds against the latch post. This is the number one call we get on the hillside streets above the old Anaconda Wire plant site.
- Rusted weld joints at the hinge post. Salt air and persistent humidity eat through galvanized steel at the exact point where the gate’s weight concentrates. The weld fails long before the rest of the frame shows wear, and the gate drops suddenly.
- Operator mounting brackets losing alignment. On cantilever and V-track systems set on steep grades, the brackets flex and corrode. That causes rack and pinion misalignment and false safety photocell trips, which leaves the gate stuck partway open.
- Period hardware with no replacements available. Latch assemblies and hinge barrels on original wrought-iron gates from the early 1900s are not in production. We fabricate or repair them rather than telling you to replace a 100-year-old gate with an aluminum panel.
Pricing for Gate Parts & Welding in Hastings-on-Hudson, NY
You will know the price before we start, and that price will not change when the job is done. Here are the ranges we see for common work in Hastings-on-Hudson:
- Hinge replacement on a standard swing gate: $240-$480, depending on hinge size and whether the post needs realignment.
- Post replacement with new footing, hinge bracket, and gate realignment: $750-$1,400, with steeper grades and deeper frost lines at the upper end.
- Rail repair with welded steel section and corrosion treatment: $320-$700.
- Custom welding for period scrollwork or latch brackets: $200-$600 per repair point.
These are not quotes, they are what we typically charge in this market. Your exact price gets written down and agreed to before we touch the gate. Standing offers apply to every job: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a precise quote. Estimates are free, and a second opinion on any written estimate from another company is also free.
We Also Serve Cities Near Hastings-on-Hudson
Our crews cover the surrounding area as well, including Dobbs Ferry, Tuckahoe, Scarsdale, and Yonkers. Each has its own quirks, but hillside gate work follows the same rules whether the driveway drops toward the Saw Mill River or climbs off Broadway. If you are nearby and need gate parts or welding, call the same number and we will head your way.
Serving Hastings-on-Hudson, NY - Our Local Coverage Area
We’re based in the Hastings-on-Hudson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Hastings-on-Hudson
Because the hinge post keeps moving, not because the hinges are weak. Hudson River moisture gets into the concrete footing, freezes in winter, and heaves the post a fraction of an inch each year. That constant movement overloads the hinge barrels, especially the top hinge on a sloped driveway. We replace the hinges with heavier stainless stock, but the real fix is resetting the post on a deeper footing. If you only replace the hinge, you will replace it again in two years. Call (877) 610-2993 and we will check the post before we sell you a hinge.
Yes. We keep blank hinge stock and can fabricate a hinge that matches the original profile on late-Victorian and Edwardian gates, including the decorative finials and strap details. The weld is done on site, ground smooth, and painted to match the existing finish. This is common work for us in the hillside neighborhoods where original ironwork is still on the house. Send a photo or have us stop by, and we will tell you what is feasible and what it costs before we start.
It is almost always a post problem. Frost heave lifts the hinge post out of its footing, and the gate drops just enough to scrape the driveway on the low side. A hinge repair might clear it for a few months, but the post will keep moving until it is reset. On steep properties above the Hudson, we dig deeper than the original footing, set the post on compacted gravel, and weld a new hinge bracket so the gate clears the grade through the full swing. That fix lasts. Call (877) 610-2993 for a free assessment.
When we weld on a gate frame or replace a post on a sloped driveway, the gate’s geometry changes slightly. The photocell beam that detects a car or a person in the gate’s path can fall out of alignment, causing false stops or, worse, failing to detect anything at all. Since the repair involves heat and realignment, the safety photocell needs to be rechecked and repositioned so the gate closes safely. We do that as part of the repair, not as an add-on.
For cantilever and V-track systems on grades like the ones in Hastings-on-Hudson, we recommend stainless steel mounting brackets over the plated mild steel that comes standard with many FAAC, BFT, and Linear operators. The plated brackets corrode within a few years this close to the river, and once corrosion starts, the rack and pinion drift out of alignment. Stainless costs more up front but holds alignment far longer, and we stock them for the brands we service. Call (877) 610-2993 and Hal will give you a straight answer on what your driveway actually needs.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hastings-on-Hudson since 2001. The name is on the shop, and the shop is down the road, which is the oldest accountability there is.