Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Glen Burnie
Gate repair in Glen Burnie usually means one of three things: a sagging gate that scrapes the driveway, an operator that stopped responding, or a rusted hinge that finally let go. We handle all three, and we’ve been doing it long enough to know the difference between a gate worth saving and one that should be replaced. If your gate is giving you trouble in Glen Burnie, call (877) 610-2993 and you’ll get a live person, not a voicemail.
We work throughout Glen Burnie, from the older neighborhoods off Crain Highway to the townhome communities near Marley Station and the commercial lots along Ritchie Highway. Hal Gatewood started this company in 2001 and still shows up on job sites. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Key takeaways:
- Most repair calls in Glen Burnie are hinge-post failures, rusted welds, and dead operators, not broken gate panels.
- We repair before we replace. If the fabric is sound, we fix the post and hinge and put the gate back in service.
- Every job carries the 90-Day Done Right Promise in writing.
- Call (877) 610-2993 anytime. A live person answers, 24/7.
Why Gatewood Fence & Gate Is Glen Burnie’s Preferred Gate Repair Company
Glen Burnie homeowners have a specific frustration with gate repair: they call a company, get a quote over the phone, and then a different person shows up and charges a different number. We don’t work that way. Our price is quoted and agreed before any work starts, and the person who gives you the quote is the same person who does the job. Hal Gatewood’s name is on every invoice.
We’ve been operating since 2001, but our presence in Glen Burnie goes beyond the truck. Hal’s published address means you can drive to the shop and look him in the eye. The crew is background-checked and uniformed on every job. And our 90-Day Done Right Promise is stamped in writing, not buried in fine print. If it’s not done right, we make it right. One call brings Hal back, no runaround and no charge. That’s how we’ve kept a strong local reputation in Glen Burnie for over two decades without a single national-brand jingle.
Response time matters when your gate won’t close and your dog is waiting by the fence. We coordinate scheduling from our Baltimore office and serve Glen Burnie locally, so a repair call is measured in days, not weeks. And because we stock brand-specific parts for LiftMaster, Viking, DoorKing, Elite, and others, we don’t have to say “we’ll order it and circle back.” We fix it on the first visit whenever possible.
Our Gate Repair Services in Glen Burnie
Electric Gate Repair
Electric gate troubleshooting in Glen Burnie covers everything from dead remotes to control boards that shorted after a summer storm. We test the photo eyes, the limit switches, the receiver, and the power feed before we ever suggest replacing a motor. Often the operator itself is fine and the problem is a corroded sensor wire or a relay. But when a board from the 1980s is fried and out of production, we’ll tell you straight, and we’ll show you what a retrofit costs versus just swapping the board.
Automatic Gate Repair
Automatic gate operators in Glen Burnie fail for reasons you wouldn’t expect: salt-laden humidity getting into the control box, winter freeze cycles pushing the gate out of alignment, and simply years of open-close cycles on components that had a designed lifespan measured in decades, not forever. We service, diagnose, and repair operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. If the operator can be saved, we save it. If not, we explain why and quote the replacement upfront.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. In Glen Burnie, the most common hinge failure we see is a weld point that has corroded through while the chain-link fabric still looks serviceable. The homeowner tightens the hinge bolts, maybe replaces the latch, and the gate sags again in six months because the post itself is moving or rotted. We dig out the old footing, set the post deeper with better concrete, weld on a new hinge bracket, and realign the gate so it swings clean. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Glen Burnie’s shallow, sandy fill soils heave in winter, and gate posts move with them. A gate that dragged last March may swing straight by June, but it will never be true again without a post reset. We realign gates by addressing the post, not by bending the panel or shimming the hinges. Sometimes the realignment requires cutting and rewelding the hinge bracket; other times we re-set the post in a deeper footing. Either way, we align the gate so it latches without dragging and stays that way through the next thaw.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Glen Burnie
We’re certified to service nine major gate brands, and in Glen Burnie that usually means Vikings and DoorKings on the older residential swing gates, Elites on the newer commercial slides along Ritchie Highway, and LiftMaster operators on townhome access gates. Because we stock common replacement boards, remotes, and safety edges locally, we can usually turn around a repair faster than a company that has to ship parts from a warehouse in another state. If you’re in ZIP codes 21060, 21061, or 21062 and you’ve got a brand we listed, you’re covered. If you’ve got something obscure, call anyway, because Hal has been doing this since 2001 and probably has a part number memorized.
Common Gate Repair Problems We See in Glen Burnie Homes
- Hinge-post welds rusted through while the fabric looks fine. The tidal-air microclimate along Marley Creek and Stoney Creek puts salt-laden humidity on bare steel all year. The first thing to go is the weld at the bottom hinge. Homeowners often call thinking they need a new latch, and that’s exactly what we check first.
- Original 1960s chain-link gates hung on shallow footings. Many mid-century homes in Glen Burnie were built on graded fill, and gate posts were often set in 18 inches of concrete, not the 30-plus inches we recommend now. Winter freeze-thaw heaves the post, the gate sags, and no amount of hinge tightening fixes it. We re-set the post deeper.
- Obsolete gate operators without modern entrapment protection. UL 325 changed the safety standard for automatic gates years ago. Original operators from the 1960s and 1970s don’t have the entrapment protection that’s required today, and replacement boards for those units are often no longer manufactured. If you’ve got a legacy operator in Glen Burnie, we can usually retrofit modern controls and safety edges to meet current standards.
- Rust through the bottom rail on wrought-iron gates near Ritchie Highway. Road salt, tidal air, and age combine on the bottom rail first. In many cases we can cut out the rusted section, weld in a new one, and repaint the repair so it matches. That’s a $200 to $400 repair versus a $1,200 replacement.
We pulled up to a 1960s rancher off Crain Highway whose original swing gate had sagged almost to the ground. Our tech found the hinge post had rotted inside its shallow footing, and the lower hinge weld was rusted through despite the chain-link fabric looking fine. We replaced the post with a deeper concrete footing, welded in a new hinge bracket, and realigned the gate so it swung cleanly again. No new panel needed. That’s the difference between replacing parts and fixing the actual problem.
Pricing for Gate Repair in Glen Burnie, MD
Here’s what we charge in the Glen Burnie area, and remember, the price is always quoted and agreed before any work starts.
- Hinge and post repair: $275-$550, depending on whether the post needs a deeper footing and a new hinge bracket welded in.
- Weld and rust repair: $200-$600, depending on the section and whether we need to grind, cut out, and patch multiple spots.
- Gate realignment: $180-$400 for a swing gate that’s sagging but has a sound post.
- Electric operator troubleshooting: $150-$350 for diagnostics and common repairs like sensor or receiver replacement; full board replacement runs higher.
- Complete operator retrofit: $850-$1,800 installed, depending on operator model and gate length.
We offer $40 off any repair over $200, no trip charge anywhere inside Anne Arundel County, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Glen Burnie
We take Gate Repair calls all over northern Anne Arundel County. If you’re in Glen Burnie or nearby, we cover South Gate, Severna Park, Ferndale, and Pasadena. Same careful diagnosis, same written 90-Day Done Right Promise, same live person on the phone. Call (877) 610-2993 and tell us where you are.
Serving Glen Burnie, MD - Our Local Coverage Area
We’re based in the Glen Burnie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Glen Burnie
The gate is sagging because the hinge post is moving, not because the hinge bolts are loose. In Glen Burnie, shallow footings in sandy fill plus winter freeze-thaw cycles heave the post out of plumb. Tightening the hinges won’t fix a moving post. We re-set the post in a deeper concrete footing and weld a new hinge bracket if the old one is corroded. Call (877) 610-2993 and we’ll diagnose it for free.
Sometimes, but usually not the control board itself. Original 1960s and 1970s boards are often no longer manufactured, and they lack the UL 325 entrapment protection that modern codes require. What we can often do is retrofit modern controls and safety edges into the existing housing, keeping the gate and the look while bringing the safety system up to current standards. That’s frequently cheaper than a full operator replacement. Call (877) 610-2993 for a quote on retrofitting your specific unit.
The best way is to replace steel hinges with galvanized or powder-coated ones and have the weld points treated with a cold-galvanizing compound. Paint alone won’t stop the tidal humidity from Marley Creek eating through bare steel. We can also weld an extra brace if the hinge area is flexing, which accelerates rust by cracking the paint film. We’ll inspect your hinges and tell you what’s actually worth doing.
No, and it’s a serious safety issue if the gate has a history of entrapment. Modern gates are required to reverse when they encounter resistance or when the photo eyes detect something in the path. If your gate keeps pushing, the photo eyes may be misaligned, the ground loop may have failed, or the operator may be old enough that it predates the UL 325 entrapment requirement. Call (877) 610-2993 right away. This is a case where repair should happen immediately.
Signs include the gate dragging more in winter than summer, visible cracks in the concrete around the post base, and the post leaning enough that the latch no longer lines up. In Glen Burnie’s sandy fill soils, freeze-thaw heave is extremely common on original footings from the 1950s through the 1970s. We can check your post with a level and confirm whether the footing is sound or sinking, usually in one visit. If yours is moving, call (877) 610-2993 before it gets worse.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Glen Burnie since 2001.