Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Gardena, CA
Gate repair in Gardena usually costs between $95 and $650 for common residential fixes, with full operator replacements running $900 to $1,800. What makes Gardena different is the housing stock: most homes in the 90247 and 90249 neighborhoods were built in the 1950s and 60s, and their original wrought-iron gates were never engineered for electric openers. Add the salt-laden marine fog that settles on hardware nearly every night, and you get hinge pins corroding from the inside out and posts snapping at the footing. We fix both, same day in most cases. Call (877) 610-2993 and you’ll talk to a person who knows gates, not a menu.
Why Gardena Homes Are Different
Gardena packs two completely different gate-repair markets into roughly two square miles. The residential streets of 90247 and 90249 are full of postwar tract homes with original wrought-iron swing gates on concrete posts poured 60 to 70 years ago. Those posts were never sized to carry the torque of an electric opener, and the hinges were never spec’d to resist the salt fog that rolls in off the Pacific most nights, eight to ten miles inland. Then you cross Western Avenue into 90248, and the calls change entirely: wide cantilever slide gates and bi-parting vehicle gates serving auto-dismantlers, logistics yards, and metal fabricators along the I-405 corridor. A residential-only shop can’t handle those. A commercial-only shop doesn’t understand the older hardware on a 1958 ranch home off Rosecrans. We do both every week, and the salt air doesn’t discriminate between a driveway swing gate and a 30-foot slide gate at a dismantling yard.
Gate Repair in Gardena
Gate repair in Gardena starts with figuring out whether the problem is the gate, the post, or the operator. In the residential neighborhoods of 90247 and 90249, it’s usually the post or the hinge pin. In the 90248 industrial corridor, it’s more often a slide gate binding on a rail or a motor fighting a gearbox that’s been corroding for years. We fix most gate problems the same visit, and we come with parts in the truck. This is what we do all day, every day, and a live person answers at (877) 610-2993 around the clock. If you want a deeper look at the full scope of what we repair, see our Gate Repair page.
Electric Gate Repair
Most electric gate failures in Gardena start with the operator, not the gate itself. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In older Gardena neighborhoods, a common job is retrofitting an electric opener onto a 1950s-era swing gate that was never engineered for one. That takes measuring, a mounted receiver, and a welder who knows how to reinforce the frame without ruining the look. Electric gate repair in Gardena’s market averages $250 to $650 for diagnostics, limit switch or photocell replacement, and opener adjustment.
Automatic Gate Repair
When a gate on a Gardena driveway opens halfway and stops, or reverses before it latches, the cause is usually a limit switch, a photocell, or a failing gear track. We also see corrosion inside operators from the salt-laden marine layer that settles in every night across the South Bay. If you’re off Marine Avenue or Redondo Beach Boulevard and the gate creeps or stalls, we’ll diagnose it on-site and fix what’s actually broken. Full operator replacement with a new motor and arm, installed, typically falls between $900 and $1,800.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. Gardena’s postwar tract homes often still have original 60-year-old wrought-iron gates on deteriorated concrete posts. We cut out the old hinge hardware, weld in new plate steel, and re-set posts in fresh concrete when needed. Fix the panel without the post and you’ll fix it twice. A hinge or post repair on a residential driveway gate in Gardena typically runs $180 to $420, depending on whether the post needs excavation and re-setting.
Gate Realignment
Worn hinges and settled posts leave a gate dragging on the driveway or latching out of square. Near Gardena High School and Moneta Gardens, we see a lot of tubular-steel side gates that pull on their top hinges until the latch no longer meets the strike. Realigning means lifting the gate, resetting hinges, and sometimes cutting down a low corner. We’ll also tell you honestly if the frame itself is too far gone to make the gate worth saving. Gate realignment usually lands between $150 and $300.
Lock Repair
Gate locks in Gardena take a beating from salt air and from warehouse-area vibration. We replace broken latch mechanisms, re-key locks to match your house keys, and install heavy-duty slide bolts on gates that need to actually stay closed. No lock is too small a job; a driveway gate that won’t latch is a security hole. Lock replacement and latch repair runs $95 to $250.
Weld & Rust Repair
Rust is the quiet killer in a marine-layer town. That’s why we grind down, treat, and re-weld rusted gate frames instead of slapping paint over it. Gardena’s auto-dismantling yards and fabricators along the 90248 corridor call us constantly for cracked hinge plates and rusted-out cantilever rails. We weld on-site so the gate never leaves your property.
How fast can you get to Gardena for a gate repair?
Same-day service in Gardena is available in most cases, especially for emergency repairs where the gate is stuck open or won’t close. We schedule by corridor and neighborhood, and a live person confirms the window when you call (877) 610-2993. If it’s before noon, we can usually get to 90247 or 90249 before evening.
Do you cover all Gardena neighborhoods and zip codes?
Yes, we cover 90247, 90248, and 90249, from Alondra Park and Moneta Gardens to the industrial areas off Vermont and Western Avenues. No trip charge inside the county, and we don’t run a minimum for most repairs. Call and we’ll tell you exactly when we can show up.
Gate Installation in Gardena
Gate installation in Gardena usually costs between $1,400 and $6,800 depending on the gate style, material, and whether we’re automating it. Most residential swing and slide gate installs in the 90247 and 90249 neighborhoods take one to two days, with the opener wired and tested before we leave. Commercial cantilever and double-leaf slide gates in the 90248 industrial corridor run higher because the posts, track, and safety systems are heavier. For a full breakdown of what goes into a new gate, see our Gate Installation page.
Driveway Gate Installation
Most Gardena driveway gates are either swing gates on 1950s-60s tract homes or slide gates on wider lots along Rosecrans and Redondo Beach Boulevard. We build both, but we start by looking at what you’ve got. If your original wrought-iron gate is straight and the hinges are good, we can often mount a new operator on it and save you the cost of a full replacement. A brand-new steel driveway gate in Gardena typically runs $2,200 to $4,800 installed, depending on width and automation.
Pedestrian Gate Installation
Side gates and walk gates in Gardena’s residential neighborhoods often sit on narrow side yards between houses, sometimes no wider than 36 inches. We measure to the inch and build gates that clear fences, garages, and the neighbor’s wall without binding. Pedestrian gate installation runs $600 to $1,600 for a standard steel or aluminum walk gate, including new posts and hardware.
Sliding Gate Installation
On tight shared driveways and narrow front setbacks, a swing gate simply won’t fit. That’s where sliding gates earn their keep. Gardena’s older tract homes frequently have short driveway runs, and a cantilever or track-style slide gate keeps the vehicle path clear without swinging out into the street. We install and automate sliding gates regularly in the 90248 corridor, where widths run 12 to 30 feet for tow trucks and delivery rigs. Most residential slide gate installs in Gardena land between $3,000 and $6,800.
Swing Gate Installation
Swing gates are the classic Gardena look, especially the ornamental wrought-iron double gates on the older ranch homes south of Rosecrans. The headaches come from the posts. On 60-year-old tract homes, the original hinge posts were undersized to begin with, and decades of use have worked them loose. We sink new posts in concrete at least 24 inches deep and set them plumb before hanging the gate, because a gate sags in the post, not in the middle. Single swing gate installs start around $1,400; double swing gates generally run $3,500 to $6,000 with automation.
Can you install an automatic opener on the original wrought-iron swing gate of my 1950s Gardena tract home, or do I have to replace the whole gate?
In most cases we can keep the original gate and mount a new opener on it, provided the iron is straight and the hinge posts are sound. Gardena’s postwar tract homes often have original wrought-iron gates that are still perfectly good steel; the failure is almost always the post underneath. We replace or reset the posts, correct the sag at the hinge point, and then mount the opener.
My Gardena home has a shared driveway with a common center post for both neighbors’ gates. Can you install a new gate for just my side?
Yes. That’s one of the most common jobs we do in Gardena’s tract neighborhoods. The trick is that the common center post usually carries hinges for both gates, so we coordinate with the neighbor, cut loose only your side, reset the post footing with new concrete so it bears both loads, and hang your new gate without disturbing theirs.
Gate Motor & Opener in Gardena
A gate motor that grinds, stalls, or won’t respond usually means one of two things in Gardena: either the salt-laden marine fog has finally eaten through a circuit board or gear track, or an older swing gate on a 1950s tract home was never properly reinforced for an opener in the first place. We fix both, same day in most cases. The trucks that roll through Gardena carry the parts and a live person answers at (877) 610-2993 any hour. For a deeper dive into operator work, see our Gate Motor & Opener page.
Motor Installation
Retrofitting an automatic opener onto a gate built in 1959 is not a bolt-on job. Many Gardena homes have their original wrought-iron driveway gates, and those hinge posts were set in concrete long before anyone imagined hanging a 30-pound motor on them. We check the post, reinforce where needed, and install the motor so it doesn’t tear itself loose after six months. A typical motor installation in Gardena runs $850 to $1,400 depending on gate weight, post condition, and whether we’re running new conduit to the house.
Motor Repair
Marine-layer corrosion is the silent killer here. We open up motors in Gardena that look clean on the outside but have rusty gear tracks and corroded limit-switch contacts inside from years of nightly coastal fog. Most motor repairs run $180 to $340, and we walk you through the exact issue before touching anything. If the repair is over $200, we knock $40 off. That’s automatic, not a negotiation.
Linear Motor
Linear arm motors are common on the long driveway gates you see in the roomier lots of western Gardena. These openers use a screw-driven piston rather than a chain, and the number-one failure we see is a bent or stripped piston from a gate that binds on its hinges. The hinge is always the root cause. We fix the piston and the hinge together so you’re not calling us again in four months. Linear motor swaps and rebuilds generally run $450 to $900 installed.
Slide Motor
In the 90248 industrial stretch, slide motors do real work every day. Tow trucks, flatbeds, delivery vans. A slide gate that jerks or stalls mid-travel is usually losing a gear tooth or fighting a bogged-down wheel truck. We carry chains, sprockets, and gearboxes for the major brands and can often get a Gardena slide gate running same day. Expect $600 to $1,200 for a slide motor replacement depending on gate length and whether the chain and track need attention too.
Do you cover all Gardena neighborhoods and ZIP codes for motor work?
Yes. We cover all of Gardena including the residential neighborhoods of 90247 and 90249, the industrial and warehouse corridors of 90248, and the areas bordering Rosecrans, Marine, and Vermont Avenues. Whether you’re near Freeman Park, just off Western, or tucked back behind El Camino College, we know the streets and we’ll find you.
Can you handle a gate motor emergency at night or on the weekend in Gardena?
Yes. A live person answers our phone 24 hours a day, 7 days a week. If your gate motor fails at 2 a.m. and your car is stuck or your property is unsecured, we’ll get someone out to Gardena. Emergency calls on weekends and nights carry no after-hours surcharge. The quote is the quote, whether it’s Tuesday at noon or Saturday night.
Gate Access Control in Gardena
Gate access control in Gardena typically costs $850 to $2,400 for a complete keypad or intercom retrofit, and $350 to $900 for replacing an individual entry component like a card reader or remote receiver. Most jobs in the 90247 and 90249 residential corridors take one visit, and if your existing gate hardware is sound, you won’t need to replace it just to add modern access. The catch in Gardena is that a lot of the gates we’re called out to were built long before anyone planned for electronics. See our Gate Access Control page for the full range of what we install.
Keypad Entry
Keypad entry retrofits are common on Gardena’s older gates because the original hardware never had provisions for electronic access. We see plenty of wrought-iron swing gates on 1950s and 1960s tract homes where a previous owner bolted a cheap wireless keypad to the post and it failed within a year. A proper keypad install runs $450 to $1,200, wired or solar, with the controller housed where marine-layer moisture won’t eat it. We quote that price up front and it doesn’t change at the door.
Remote Control
Remote control systems for Gardena gates wear out faster than they should because the salt-laden fog that settles on hardware near the South Bay marine layer corrodes receiver internals over time. A new receiver and remotes typically runs $350 to $750. We program on-site and we don’t swap out equipment that still works. If the old receiver is fine and the remote was just never reprogrammed after a power bump, that’s what we’ll tell you, and the fix is cheaper.
Phone Entry
Phone entry systems are big in the 90248 corridor, where logistics yards and auto-dismantlers need to buzz in trucks and flatbeds without a guard stationed at the gate. Installs run $900 to $2,000 depending on whether we’re tying into an existing landline, a cellular unit, or a VoIP system. We’ve retrofitted phone entry onto gates that were originally opened by hand chain, and we know Gardena’s commercial gate hardware well enough to make that work without replacing the gate itself.
Card Reader
Card reader access runs $650 to $1,400 for most residential and light-commercial installs. We see a lot of card readers on the industrial side of 90248, where multiple drivers need gate access at different shifts and a keypad code doesn’t provide accountability. Our crew handles the wiring, the mounting, and the programming, and we’ll show you how to add or remove cards yourself before we leave.
Which parts of Gardena do you cover for access control?
We cover all three Gardena ZIP codes: 90247, 90248, and 90249. That includes the residential streets around Rowley Park, the tract-home neighborhoods east of Vermont Avenue, and the industrial corridor along the I-405 spine where the warehouses, auto-dismantlers, and fab shops run their big slide gates.
Do you offer emergency gate access control service in Gardena?
Yes, we answer calls around the clock and treat a gate that won’t open for emergency vehicles or delivery trucks as a priority. If a gate has failed shut and you can’t get a car in or out, call (877) 610-2993 any time. We’ll talk you through what’s happening and get someone out to Gardena fast.
Gate Parts & Welding in Gardena
Gate hardware fails differently in Gardena than it does ten miles inland. The marine layer that rolls over the 405 every evening carries salt that settles into hinge pins, post footings, and welded joints, and it stays there. If you live in 90247 or 90249 and your swing gate sags, binds, or scrapes the driveway, the problem is almost never the visible steel. It’s what the salt fog has been doing underneath for years. For the full scope of what we fabricate and replace, see our Gate Parts & Welding page.
Hinge Replacement
Hinges are the first thing to go on a Gardena gate. Salt-laden fog corrodes galvanized hinge pins within five to seven years, and once the pin is worn, the gate sags and binds even though the panel looks fine. We cut out the old hinges and weld in new ones, typically stainless steel, so the gate hangs true again. A hinge replacement on a residential swing gate typically runs $180 to $340, depending on whether we’re doing one hinge or all three and whether the post needs reinforcement while we’re in there.
Post Replacement
The hinge post is where Gardena gates actually die. Those 1950s-era posts were undersized when they were poured, and decades of gate torque plus salt working into the concrete at the base eventually snap them at the footing. We dig out the old post, pour a new footing, and weld the gate back onto a post that can actually carry it. Post replacement ranges from $450 to $900 for a standard tract-home gate post, including new concrete.
Rail Repair
Rail issues are more common in the 90248 industrial corridor, where cantilever slide gates work hard every day. Corrosion eats roller bearings and rack-and-pinion teeth, and when a slide gate jumps the track, it can jam wide open or slam shut with enough force to hurt someone. We repair the rail, replace the bearings, and weld the rack segments back to spec. A full slide-gate rail repair can run $600 to $1,500 depending on how much rack and bearing hardware has to be replaced.
Custom Welding
Some gates aren’t worth replacing and can’t be fixed with off-the-shelf parts. That’s where our on-site welding comes in. We fabricate brackets, reinforce sagging corners, weld cracked hinges back to solid metal, and build custom mounts for openers on gates that were never designed for them. The gate stays in your driveway. You don’t haul it anywhere. A cracked hinge weld might be $120 to $200, and we quote every custom job in writing before we strike an arc.
Can you replace just the hinge post on my 1960s Gardena swing gate, or do I need a whole new gate?
In most cases, yes, we can replace just the hinge post and keep your existing gate. We’ve done it many times in Gardena’s tract-home neighborhoods. We cut the gate free, dig out the old footing, pour new concrete, set a properly sized post, and weld the gate back on. The gate keeps its character, and the post actually holds it.
Why do slide gates in the 90248 industrial corridor keep jumping the track?
Slide gates in Gardena’s industrial corridor fail because salt corrosion eats the roller bearings and the rack teeth that keep the gate tracking straight. When those bearings wear down, the gate sags just enough to slip off the track under load, and once it’s off, it jams. We replace the bearings, weld the rack back to spec, and reset the gate so it rolls clean.
Brands We Service in Gardena
We’re certified to service nine major gate brands, including Linear, Viking, Ghost Controls, and DoorKing. We stock common parts for these brands in our trucks so most Gardena repairs happen on the first visit. If you’re curious about the full manufacturer list, see our brands.
Pricing for Gate Repair in Gardena, CA
| Service | Typical range in Gardena |
|---|---|
| Lock replacement & latch repair | $95-$250 |
| Gate realignment | $150-$300 |
| Hinge or post repair (residential) | $180-$420 |
| Electric gate repair (diagnostics, limit switch, photocell) | $250-$650 |
| Full operator replacement (motor & arm, installed) | $900-$1,800 |
| Pedestrian walk gate install | $600-$1,600 |
| Single swing driveway gate (manual) | $1,400-$2,800 |
| Sliding gate install (residential, automated) | $3,000-$6,800 |
| Keypad entry install | $450-$1,200 |
| Phone entry system install | $900-$2,000 |
| Hinge replacement (residential swing gate) | $180-$340 |
| Post replacement (standard tract-home post) | $450-$900 |
What pushes a Gardena price up is almost always the condition of the existing post and the amount of salt corrosion we have to cut out before we can weld fresh steel. Every price is agreed in writing before we start, and the number you approve is the number you pay. No changes at the door.
Neighborhoods We Serve in Gardena
We work all over Gardena, from the tract-home streets east of Vermont to the industrial yards hugging the 405. Most residential calls in 90247 and 90249 can be scheduled same day or next morning; the 90248 corridor gets priority when a stuck gate is blocking trucks or leaving a yard unsecured.
- Central Gardena (90247)
- South Gardena (90247)
- Moneta Gardens
- Gardena Industrial Area near I-405 (90248)
- North Gardena (90249)
Service Area - Cities Near Gardena
Most of our work is in Gardena, CA, but we regularly cross into the surrounding communities. We serve West Rancho Dominguez, CA, Alondra Park, CA, West Athens, CA, Lawndale, CA, and Inglewood, CA. No trip charge inside the county, and the same upfront pricing applies wherever the job takes us.
Serving Gardena, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Gardena and the communities around it; dispatch is coordinated from our Los Angeles office. The map shows the Gardena coverage area; if your address is on it, we can help.
Also serving nearby: Gardena, CA, West Rancho Dominguez, CA, Alondra Park, CA, West Athens, CA, Lawndale, CA, Inglewood, CA.
FAQs About Gate Repair in Gardena
Same day in most cases. The Gardena area is dense enough that we’re already in or near the 90247, 90248, or 90249 zip codes on most weekdays. If you call before noon, we can usually be on-site that afternoon. A live person confirms the window when you call (877) 610-2993.
Most residential hinge, post, and opener repairs don’t require a permit. Automated gates in the 90248 industrial corridor do need UL 325-listed entrapment-protection devices, and we bring those into compliance when we’re on-site. We’ll tell you honestly if your job needs paperwork before we start.
You get a real window when you call, not a four-hour swing. We schedule by neighborhood and tell you what’s realistic for that day. And if something changes, the live person who answers can adjust it with you right then.
If your gate is sagging, stuck, or grinding in Gardena, call (877) 610-2993 for a free estimate. A live person answers around the clock, and the quote we give you over the phone is the quote you’ll see in writing before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Gardena Customers Say
"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth