Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Gardena
A new driveway gate in Gardena typically runs $1,800-$5,200 installed, depending on whether it’s a single swing gate for a 1950s tract home or a heavy slide gate for a 90248 warehouse entrance. We work throughout 90247, 90248, and 90249, and Hal Gatewood still walks most Gardena job sites himself. If you’re calling from a block off Rosecrans or Vermont, we’re close by and can usually have someone out to measure within a day or two. Call (877) 610-2993 and you’ll get a person, not a recording.
Why Gatewood Fence & Gate Is Gardena’s Preferred Gate Installation Company
We’ve been owner-operated since 2001, and our name is on the shop. That matters in a city like Gardena, where half the residential blocks are postwar tract homes with aging wrought iron, and the other half is industrial yards that need a different class of gate entirely. We understand both, because we work both every week. The person who quotes your gate is likely the person who welds it, and Hal Gatewood’s cell number is on the invoice. Customers around Alondra Park and West Athens tell us the same thing: it’s hard to find a gate company that doesn’t outsource the work to a sub who’s never been to the neighborhood.
Our 90-Day Done Right Promise is in writing on every job. If something isn’t right, one call brings us back. No runaround, no “we’ll put you on the schedule.” We answer the phone 24/7 with a live person, not a voicemail or a dispatch queue three states away. Gardena homeowners and warehouse operators both seem to appreciate that, because around here a gate that stops latching isn’t a small thing. It’s how a driveway turns into an insurance claim.
Our Gate Installation Services in Gardena
Driveway Gate Installation
Most driveway gates we install in Gardena’s 90247 and 90249 neighborhoods are swing gates on homes built between the late 1940s and mid-1960s. Those original posts were rarely engineered for an electric opener, so the job usually starts with the footing, not the gate panel. We pour new footings, set steel posts correctly, and then hang a gate that won’t sag in the hinge post six months later. The Gate Installation team handles everything from single-leaf residential gates to estate-style double gates.
Pedestrian Gate Installation
Side-yard gates in Gardena take real abuse from the marine layer. Salt-laden fog settles on hardware nearly every night of the year, and cheap zinc hinges rust through in two or three seasons. We install pedestrian gates with galvanized or powder-coated hardware sized for coastal air, not big-box bargain packs. On 1950s homes with narrow side setbacks between Rosecrans and Marine, we’re used to working in tight conditions where a gate has to swing without clipping a gas meter or garage wall.
Sliding Gate Installation
Sliding gates are the right answer for a lot of Gardena properties, especially in 90248, where driveways and industrial aprons need a gate that doesn’t swing across a sidewalk or into a neighbor’s right-of-way. A cantilever slide gate with a proper track and gear rack handles daily tow-truck traffic far better than a residential-duty kit. We’ve replaced more than a few stripped rack-and-pinion systems in that corridor, and we spec the gate so it doesn’t trip entrapment protection under load. This is our bread and butter for Gate Installation in Gardena work in the industrial strip.
Swing Gate Installation
Double swing gates still make sense for wide residential driveways and older homes with a traditional look. The catch in Gardena is the original hinge post. If it’s a 60-year-old wrought iron post set in a 12-inch footing, the gate will bind, sag, and eventually refuse to close. We fix the post first or install a new engineered post before hanging anything on it. That’s the difference between a gate that lasts 20 years and one that needs a service call by spring.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Gardena
We’re certified to service nine major gate brands, and for Gardena jobs we lean on three most often: Linear for residential slide and swing operators, Viking for heavy commercial slide gates in the 90248 corridor, and Ghost Controls for 1950s tract homes where we’re retrofitting an opener onto a gate that never had one. Because we stock local parts and do our own welding on site, a replacement operator doesn’t turn into a two-week parts wait. Hal’s crew welds in your driveway, not at some far-away shop.
Common Gate Installation Problems We See in Gardena Homes
- New gate on an original 1950s hinge post. The post was never sized for an electric operator, and within months the gate sags and binds. We’ll tell you if your existing post can be reinforced, or if it needs to go. A gate sags in the hinge post, not in the middle, and that is where we start.
- Shared driveway rights-of-way. On blocks where two neighbors share a fence line or a narrow driveway, a swing gate that swings left can block the neighbor’s pedestrian access. We coordinate with the neighbor’s property line and often recommend a slide gate so both properties keep working.
- Residential-duty slide gate kits on commercial bi-parting gates in 90248. The under-spec track and gear rack wear out under daily tow-truck traffic, then trip the entrapment protection constantly. We replace the whole assembly with correctly sized components and UL 325 compliant sensors.
- Marine-layer corrosion on new hardware. Gardena sits squarely in the South Bay marine-layer belt, so coastal fog settles on gate hardware nearly every night. Standard steel fasteners rot. We use coated or galvanized hardware as standard on every Gardena job, not as an upsell.
Pricing for Gate Installation in Gardena, CA
A single driveway swing gate in Gardena typically runs $1,800-$3,400 including new posts, hinges, and basic opener wiring, but without the operator. A pedestrian side gate runs $600-$1,500. Double swing gates come in around $3,000-$5,200 for a standard 12-to-16-foot opening. For a commercial slide gate in 90248, expect $4,500-$9,000 depending on gate width, operator class, and whether we’re adding loop detectors and photocells for code compliance. The price is quoted and agreed before any work starts. We don’t show up with one number and leave with another. Call (877) 610-2993 for a free measure and a written estimate, and seniors and veterans take 10% off every job.
We Also Serve Cities Near Gardena
Our crews work every day in West Rancho Dominguez, Alondra Park, West Athens, and Lawndale. If your property sits just over the Gardena line on the Lawndale side or near Alondra Park, you’re still inside our normal service area with the same no-trip-charge policy for measurements across the county.
Serving Gardena, CA - Our Local Coverage Area
We’re based in the Gardena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Gardena
Yes. On tight Gardena lots where two driveways meet at a shared fence line, a cantilever slide gate or a single-leaf exterior slide gate is usually the right fix because it travels parallel to the fence instead of swinging across the neighbor’s side. We verify the setbacks along the property line before we quote, and we handle the footing, the track, and the operator as one job. Call (877) 610-2993 and we’ll come look at your specific line.
The most common answer for those postwar tract homes in 90247 is a compact linear arm operator mounted on the post, or a Ghost Controls kit with a short arm that fits tight setbacks. You don’t always need to rip out the original gate. If the post is sound, we reinforce the footing and mount the operator without taking down the ironwork. If the post is not sound, we tell you before we quote anything.
Yes, Gardena’s municipal code requires UL-listed entrapment protection devices on any automated gate, including in the industrial corridor. That means photocells, safety edges, or loop detectors depending on the setup, and the gate has to pass inspection. We handle the code side for you on commercial jobs in 90248, including replacing jury-rigged gates with compliant systems. This is a demand we see far more in Gardena than in Hawthorne or Torrance.
Yes. Gardena sits inland from the coast but squarely in the South Bay marine-layer zone, so salt-laden fog settles on hardware nearly every night. Standard steel hinges, spring pins, and gear tracks corrode visibly within a few seasons. We use galvanized or powder-coated hardware as standard on Gardena jobs and we weld with materials chosen for coastal air. It is a bigger problem here than in Compton or Carson, and we plan for it on every install.
Yes. On a shared driveway, we stage the work so one leaf or one access point stays operable while we work. For example, just off Rosecrans Avenue in 90248, our tech took over a bi-parting slide gate at an auto-dismantling yard where the original rack and pinion had been stripped to bare steel and the hinge posts were rocking in their footings. We re-poured the footings, installed a Viking operator with new safety photocells and loop detectors, and kept one leaf manually operable while we worked so flatbeds could still get in. That gate has been passing safety inspections since. We plan the sequence with you before we start.
If you have a gate that needs replacing in Gardena, call (877) 610-2993. We’ll send someone to measure, give you a written price, and answer your questions without the runaround. Hal Gatewood’s name is on the shop and on the invoice. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Gardena and the South Bay since 2001.