Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Fontana
If your gate has stopped opening, started sagging, or sounds like it’s grinding itself to death, we can help. Gate repair in Fontana usually costs between $180 and $340 for common fixes like hinge replacement, roller swaps, and limit switch calibration. Bigger jobs like operator replacement on an HOA vehicle gate or repairing a bent industrial slide gate run $600 to $1,800. Call (877) 610-2993 and a live person answers, day or night, not a voicemail. We know exactly what Fontana’s winds and warehouse traffic do to gates, because we see it every week.
Why Gatewood Fence & Gate Is Fontana’s Preferred Gate Repair Company
Hal Gatewood started this company in 2001 with one rule: fix what’s broken, don’t sell what isn’t needed. That rule still runs the shop. We repair gates on site in Fontana driveways and commercial yards, which means we weld in the truck, not in some off-site facility. If a gate sags, we fix the post and the hinge, not just the panel. If a motor failed because the limit switch was fighting triple-digit heat and Cajon Pass gusts, we fix the actual cause. And every job, residential or commercial, carries our 90-Day Done Right Promise in writing. If it is not right, one call brings us back.
We answer the phone with a person. Not a recorded menu, not a call center, not a chatbot. Fontana homeowners and facility managers call (877) 610-2993 and get a real answer. You can also drive to the shop and look Hal in the eye if you want to. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Local Knowledge That Actually Matters in Fontana
Fontana sits at the receiving end of the Cajon Pass wind corridor. That makes it one of the windiest spots in the Inland Empire. Sustained gusts routinely bend gate frames, jump rollers off tracks, and burn out automatic operators at rates that neighboring Rancho Cucamonga or Ontario simply do not experience. A technician who learned gate repair in a calm coastal city will misdiagnose a Fontana gate. We learned our trade here. We know what a wind-torqued hinge post looks like. We know the difference between a failed Viking operator and one that’s just been fighting seventy-mile-per-hour gusts for six months. That’s the difference between fixing it once and paying for the same repair twice.
Our Gate Repair Services in Fontana
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. Fontana’s older HOA gates in South Fontana, built out during the 1990s and 2000s housing boom, are now 15 to 25 years old. Their original hinge posts were never set to survive two decades of Cajon Pass wind shear. We cut out rotted or bent posts, set new footings, and weld heavy-gauge hinges back into alignment. In central and west Fontana, where mid-century Kaiser Steel era homes are adding wrought-iron driveway gates as retrofit security, we do the same job on brand-new installs that were never quite plumb. Fix the panel without the post and you’ll fix it twice. We fix the post.
Automatic Gate Repair
Fontana’s master-planned HOA communities are hitting a wave of operator failures all at once. The original automatic gate systems installed during the 2000s building boom are reaching end-of-life. Control boards go obsolete. Safety photocells wear out. Limit switches get knocked out of calibration by thermal expansion during triple-digit summers. We repair or replace operators from DoorKing, Viking, Linear, and Ghost Controls. In most cases we can retrofit a new control board or recalibrate the existing operator for a few hundred dollars instead of selling you a whole new system. Gate Repair starts with an honest diagnosis, not a sales pitch.
Gate Realignment
Show me the gate closing on its own and I’ll show you where it is failing. In Fontana, wind loading is the number one cause of misaligned gates. A single-leaf driveway gate that catches sustained wind slowly torques its hinges until the latch misses the post. A sliding gate on the warehouse corridor near Cherry Avenue or Slover Avenue takes a different beating: semi-truck traffic, constant cycling, and heavy-gauge rollers wearing unevenly. We realign gates by fixing the root cause, whether that means heating and bending a steel frame back to true, replacing worn roller trucks, or resetting the rack and pinion on an industrial slide gate.
Weld & Rust Repair
Fontana’s wind carries dust and grit from the Cajon Pass, and that grit finds every scratch in a powder coat. Rust starts at the welds and spreads. We weld on site, in your driveway or in your yard, repairing cracked frame joints, reinforcing rust-thinned tubing, and rebuilding gate corners that have failed. We have been welding on site since 2001. We do not haul your gate away to a shop across the county. It stays where it belongs, and you see the repair happen in front of you.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fontana
We service the operators Fontana actually has. That means a lot of DoorKing and Viking units on HOA vehicle gates, Linear openers on mid-2000s residential installs, and Ghost Controls on newer retrofit systems. We stock common control boards, limit switches, photocells, and remote receivers for these brands, and we can order anything else fast. If your operator is 20 years old and the manufacturer no longer makes the board, we’ll tell you straight: retrofitting makes sense when the motor and gearbox are still sound, and full replacement is cheaper when they are not. We’ll show you the numbers either way before we start.
Common Gate Repair Problems We See in Fontana Homes
- Wind-torqued hinge posts causing sag. Cajon Pass gusts push on a gate leaf for years, slowly rocking the post in its footing. The gate sags, the latch misses, and the opener strains against misalignment. We reset the post and rebuild the hinge so the frame carries the load again.
- Legacy HOA operators failing in waves. South Fontana’s HOA gates from the 1990s and 2000s boom are all aging out around the same time. Obsolete control boards, worn safety photocells, and limit switches that drift out of calibration from triple-digit heat. We replace the failed component, not the whole system, whenever the motor is still sound.
- Industrial slide gates on the warehouse corridor. Cherry Avenue, Slover Avenue, and the I-10 frontage roads carry heavy semi-truck traffic through sliding chain-link and rolling steel gates. Heavier rollers wear out. Rack and pinion rails bend under wind shear and constant load. A single down gate can halt a distribution shift, so these need repairs that hold up to commercial cycling.
- Wood gate warping in Fontana heat. Triple-digit summer temperatures warp wooden gate boards and throw automatic gate limit switches out of calibration. A gate that closes fine in May may suddenly reverse itself in August. That’s thermal expansion, and it’s a known seasonal failure driver here.
Pricing for Gate Repair in Fontana, CA
We give you the price before we start. Not a range on the phone and a surprise at the door. Here is what Fontana homeowners and facility managers typically pay: hinge and post repair runs $280 to $650, depending on whether we’re resetting one hinge or replacing a post footing. Gate realignment runs $150 to $350. Automatic operator repair, including limit switch calibration and photocell replacement, runs $180 to $420. Full operator replacement on an HOA vehicle gate runs $800 to $1,800 installed. Industrial slide gate repair runs $600 to $2,000 depending on roller and rack replacement. We honor $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. A free second opinion on any written estimate is always available. Call (877) 610-2993 and we’ll quote your exact job over the phone, free.
We Also Serve Cities Near Fontana
Our crews cover Fontana and the surrounding Inland Empire communities. If you’re in Bloomington, Rialto, Glen Avon, or Pedley, we’ll come to you with the same on-site welding and the same 90-Day Done Right Promise. Gate Repair in Fontana is our focus, but good work travels. Call (877) 610-2993 and we’ll tell you exactly when we can be there.
Serving Fontana, CA - Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Fontana
Because those are Fontana’s windiest seasons. The Santa Ana winds and high-wind events coming through the Cajon Pass put sustained mechanical load on automatic operators for hours at a time. The motor fights the wind every time the gate cycles, overheats, and eventually burns out. If your operator has died twice in five years, the fix is not another motor. It is usually a wind-load issue: we check the gate’s wind exposure, reinforce the frame, recalibrate the limit switches, and install the correct operator for the actual load. Call (877) 610-2993 for an exact diagnosis, and estimates are free.
Most of the time, yes. If the motor and gearbox are still sound, we can replace the obsolete control board, install new safety photocells, and recalibrate the limit switches for modern entrapment protection standards. That retrofit typically runs $400 to $800, versus $1,000 to $1,800 for a full operator replacement. The tipping point is the motor itself. Once a 25-year-old motor starts drawing excess current or the gearbox develops play, retrofitting buys you a year or two at most, and replacement is the cheaper answer. We will show you the amp draw and let you decide with real numbers. Call (877) 610-2993 for a free on-site assessment.
It is not normal, but it is common in Fontana. The warehouse corridor along Cherry Avenue, Slover Avenue, and the I-10 frontage roads sees constant semi-truck traffic and heavy wind shear. Rollers wear unevenly, the rack and pinion drifts out of alignment, and the gate picks up enough play to jump the track. Our tech recently rolled out to a distribution center off Slover Avenue where a 24-foot sliding chain-link gate had thrown its rack and pinion alignment after a high-wind event, leaving the gate stalled halfway. We replaced the bent rack, reset the roller trucks on heavy-gauge rail, and recalibrated the Viking operator’s limit switches, then verified the loop detector was still reading semi-truck traffic before the yard reopened for the evening shift. Call (877) 610-2993 and we’ll do the same for your gate.
Look at the hinge post. A gate sags in the post, not in the middle. Fontana’s wind corridor means post footings on older HOA gates and mid-century homes in 92335 have often been torqued loose over the years. If the post wobbles when you push the gate, the footing is failing. If the post is solid but the gate sags, the hinges have worn or the frame has twisted. Both are repairable. The mistake we see is someone tightening the hinges and calling it done. The gate sags again in six months because the post is still loose. We fix the post, the frame, and the alignment in one job, and the 90-Day Done Right Promise backs it up.
Yes. If your gate was installed before the UL 325 entrapment protection standards became standard practice, or if the original safety photocells have stopped working, your gate is a serious safety risk. Modern code requires external entrapment protection devices like photocells or contact edges, plus a properly calibrated force setting on the motor. This is not a suggestion. A gate that reverses too late is dangerous. We can add retrofit photocells, contact edges, and recalibrate the operator on most existing Fontana installs for $200 to $500. Call (877) 610-2993 and we’ll tell you exactly what your gate needs to be safe and compliant.
Call Gatewood Fence & Gate for Gate Repair in Fontana
If your gate is failing, do not wait for the wind to finish the job. Call (877) 610-2993 now. A live person answers, 24 hours a day, seven days a week. We’ll give you an honest diagnosis, a written price before any work starts, and a 90-Day Done Right Promise on every job. Hal Gatewood’s name is on the shop, and he has been fixing gates since 2001. Serving Fontana, Bloomington, Rialto, Glen Avon, and Pedley. Licensed and insured. Free estimates.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fontana since 2001.