Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Federal Heights
Gate repair in Federal Heights usually costs between $160 and $480 depending on whether we’re replacing a hinge, re-setting a heaved post, or welding a cracked frame. Most jobs in the 80221 area are done the same day we look at them, and you’ll get a written price before any work starts. If you live off Federal Boulevard or in the older ranch neighborhoods around Saulsbury Street, you already know the pattern: gates that sagged over the winter, hinges that snapped, operators that quit after a cold snap. Call (877) 610-2993 and you’ll reach a live person who can tell you what’s wrong and what it’ll cost to fix.
Why Gatewood Fence & Gate Is Federal Heights’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop. That matters in Federal Heights, where most of the homes still have their original 1950s-to-1970s galvanized chain-link gates and the hardware is just plain worn out. We’re not a national outfit that swaps parts sight unseen. We come out, look at the gate in your driveway, and fix what’s actually broken. If a hinge post has heaved, we re-set it. If a weld cracked, we weld it on site. You get a 90-Day Done Right Promise in writing, and if it’s not right, one call brings us back. No runaround, no voicemail, no call center three states away.
Federal Heights customers call us because they want someone who knows the difference between a gate that’s sagging from a tired hinge and one that’s sagging because the post moved in the clay. We’ve been in enough backyards off Tejon Street and along the numbered streets near 84th Avenue to know exactly what freezes, what binds, and what needs replacing before it fails. Every caller gets a live person, 24/7. Not a chatbot. Not a menu tree. A person who can schedule a visit to Federal Heights, usually the same day.
Our Gate Repair Services in Federal Heights
Hinge & Post Repair
This is the most common call we get in Federal Heights, and it’s almost never about the gate itself. A gate sags in the hinge post, not in the middle. The city’s clay-heavy soil heaves with every freeze-thaw cycle, and 100-plus of them a year will slowly push a post out of plumb. We dig out the old footing, re-set the post with fresh concrete, and replace the corroded barrel hinges that original 1940s-1970s gates always have. Then we hang the gate square and it latches like it’s supposed to.
Gate Realignment
By early March, a lot of Federal Heights gates stop latching. The post shifted half an inch over the winter, or the top rail bowed, or the latch bar no longer lines up with the post striker. We can usually realign without replacing the gate. We adjust hinges, re-set posts where needed, and weld a brace at the top rail when the frame is twisting. If your gate drags in the grass off Shaw Heights or won’t catch the latch off West 92nd, we’ll fix the alignment, not sell you a new gate.
Weld & Rust Repair
Galvanized steel from the 1960s doesn’t last forever. We see rust-through at the hinge stiles, cracks at weld points, and bottom rails that have corroded from decades of sprinkler splash. We grind it back, weld in a new section, and put a rust-converting primer on before we’re done. The weld is done in your driveway, with the gate still on its hinges when that’s practical. Hal doesn’t haul your gate off to a shop and leave you without a fence for a week.
Electric Gate Repair & Automatic Gate Repair
Older automatic gates in Federal Heights run on control boards that are now obsolete. When a legacy LiftMaster or Linear board dies after a cold snap, we can often retrofit a modern board and add entrapment protection that meets current safety standards. If the operator itself is too far gone, we’ll tell you honestly and quote a replacement that fits the existing gate. We service ten major brands, and we keep common boards and sensors on the truck so we’re not ordering parts and coming back a week later.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Federal Heights
We’re certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Federal Heights, we see a lot of old Viking and Ghost Controls units on residential swing gates and DoorKing operators on the commercial sliders along Federal Boulevard. We stock boards, sensors, and remotes for these brands locally, which means faster turnaround for 80221 customers. Whether it’s a 20-year-old Viking that’s still humming along or a Ghost Controls opener that stopped after a power surge, we can fix it or tell you honestly when it’s cheaper to replace.
Common Gate Repair Problems We See in Federal Heights Homes
- Posts heaved out of alignment by Front Range freeze-thaw cycles. The clay-heavy soil under Federal Heights expands and contracts all winter, and by spring, gate posts have moved enough that the gate won’t latch or drags against the ground.
- Corroded and metal-fatigued hinges on original galvanized gates. Gates hung in the 1950s and 1960s have barrel hinges that were never designed to last 60 years. They snap at the hinge post under repeated stress, and the gate drops.
- Bent bottom rollers and twisted frames on commercial sliders. Along Federal Boulevard, the north-south wind channels straight down the strip and hits sliding security gates broadside. Rollers bend, frames twist, and the gate starts jumping the track.
- Obsolete control boards that fail without warning. Legacy operators from the 1980s and 1990s often can’t be retrofitted with modern entrapment protection. When the board dies, you’re replacing it or risking a gate that closes when it shouldn’t.
These are not generic problems. They’re what happens when 70-year-old gate hardware meets Colorado’s aggressive freeze-thaw cycles and Federal Heights’s specific soil conditions. A company that doesn’t know the difference will sell you a new gate. We’ll fix the post first, because that’s what’s actually wrong.
Pricing for Gate Repair in Federal Heights, CO
A typical gate repair in Federal Heights runs $160 to $480. A simple hinge replacement with a few welded gussets might be under $200. Re-setting a heaved post with new concrete and hardware usually runs $280 to $450. A full realignment with welded bracing and latch adjustment lands around $220 to $380. If we’re retrofitting an old operator’s control board, you’re looking at $350 to $600 parts and labor, and we’ll quote it in writing before we start. $40 off any repair over $200, no trip charge inside the county, and seniors and veterans always get 10% off. The price you’re quoted is the price you pay. That’s not a footnote. It’s how we’ve worked since 2001.
Call (877) 610-2993 for a free estimate, and we’ll give you a number you can hold us to.
We Also Serve Cities Near Federal Heights
Our crews serve Federal Heights and the surrounding north-metro communities, including Sherrelwood, Welby, Shaw Heights, and Westminster. If you’re just outside the city line and need Gate Repair, give us a call and we’ll get you scheduled. We’re holding the same schedule for Gate Repair in Federal Heights all week.
Serving Federal Heights, CO - Our Local Coverage Area
We’re based in the Federal Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Federal Heights
Gates in Federal Heights sag after winter because the clay-heavy soil heaves with every freeze-thaw cycle, and we get over 100 of those cycles each year. The post shifts, the gate drops, and by early spring it won’t latch. Realignment usually costs $220 to $380, and we can do it in one visit. Call (877) 610-2993 and we’ll get you on the schedule before the spring rush fills it up.
In most cases, yes, you can retrofit entrapment protection onto an older gate. We add photocell sensors and current-sensing edges to existing operators when the board supports them. If the board is too obsolete to run the safety circuits, we replace the board before we’d recommend replacing the gate. Call (877) 610-2993 and we’ll tell you what your specific setup can handle.
Cold snaps kill capacitors and solder joints in ageing control boards, and Federal Heights gets hard freezes every winter. The board loses its memory or refuses to send the open/close signal, and the operator just sits there. We can usually replace the board same-day and get your gate moving again. Call (877) 610-2993 for a diagnosis and a written quote before we touch anything.
Yes. Federal Boulevard runs north-south and channels steady wind directly against the face of sliding gates along that strip. The rollers take side load they were never sized for, and they bend. We replace them with heavier-duty rollers and add a mid-span guide to stop the frame from twisting. Call (877) 610-2993 and we’ll take a look at the whole track.
We dig out the old footing, pull the post back to plumb, re-set it with new concrete, and replace the hinges before re-hanging the gate. Mudsill repair like this is the only real fix; just bending the gate back doesn’t help because the post will heave again. This runs $280 to $450 in Federal Heights, and we’ll quote it before we dig. Call (877) 610-2993 for a free estimate.
We had a homeowner on Saulsbury Street in 80221 with an original 1962 chain-link swing gate whose galvanized tube frame had finally fatigued at the hinge post. After seeing the post itself had heaved over an inch, we dug out and re-set the post footing with extra concrete, replaced the corroded barrel hinges, and performed sag correction by welding a brace at the top rail. The gate now swings square and latches without dragging, and we recommended a safety photocell retrofit for the old operator they were still using.
That’s the kind of work Federal Heights gates need. Not a new gate. The right repair, done in the driveway, with a name behind it. Hal Gatewood has been at it since 2001, and the shop is down the road. Call (877) 610-2993 and you’ll get a live person, a straight answer, and a price you can verify before the work begins. We’re licensed, insured, and we stand behind every job with our 90-Day Done Right Promise in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Federal Heights since 2001.