Gate Repair in Farmers Branch - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Farmers Branch

Gate repair in Farmers Branch costs anywhere from $145 for a simple hinge replacement up to $4,200 for a commercial slide-gate operator swap in the Valwood Industrial Park. Most residential calls we run in 75234 land between $180 and $650, and we can usually be at your driveway the same day you call. Hal Gatewood has been fixing gates since 2001, and the shop answers the phone with a live person at (877) 610-2993 around the clock. No voicemail trees, no call center three states away, no chatbot.

Call (877) 610-2993

Farmers Branch is a different kind of gate repair market than anywhere else in the Metroplex. You’ve got one of the densest collections of light-industrial and warehouse properties in DFW packed into about 12 square miles, sitting right next to 1960s and 1970s ranch neighborhoods where original wrought-iron driveway gates are now 40 to 60 years old. That means the work we do here splits into two distinct worlds: high-cycle commercial slide gates and aging residential ironwork. The soil, the housing stock, and the cycle counts all push different failure modes. We’ll get into that below.

Why Gatewood Fence & Gate Is Farmers Branch’s Preferred Gate Repair Company

We’re locally owned and owner-operated. Hal’s name is on the shop, his address is published, and his license number is there for anyone who wants to check. That’s the oldest accountability there is. When you call, a live person answers. When the job’s done, you get the 90-Day Done Right Promise in writing. If it’s not done right, one call brings him back. No runaround, no fine print.

We hear the same story from Farmers Branch homeowners a lot: a national outfit quoted one price on the phone and charged another at the door. Someone promised a two-hour window and showed up six hours late. A gate that got “fixed” six months ago is sagging again because the post was never addressed. That’s not how we operate. The price is quoted and agreed before any work starts. The person who shows up is background-checked and uniformed. And if the fix doesn’t hold, you’ve got it in writing that we’ll make it right.

Our Gate Repair in Farmers Branch work pulls from the metro office, but the crew that comes out is local to the DFW area and knows the neighborhoods off Belt Line Road, Valwood Parkway, and Josey Lane. That matters when the problem is a post that shifted because the black clay under your driveway expanded after a week of rain. A technician who’s never worked this soil might swap a hinge and call it fixed. We know to look at the footing.

Our Gate Repair Services in Farmers Branch

Electric Gate Repair

Electric gate repair in Farmers Branch runs $165 to $850 depending on whether we’re fixing a control board, replacing a limit switch, rewiring a keypad, or swapping out a motor with our Gate Motor & Opener in Farmers Branch. In the residential neighborhoods north of Belt Line Road, most electric gates are retrofit systems on old wrought-iron frames, which means the operator and the gate itself are often fighting each other. If the gate binds because a post moved, the motor works harder and burns out faster. We fix the operator and the alignment together. That’s the point most repairs miss.

We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We’re certified for all nine. If you call at 9 p.m. on a Saturday because your gate won’t open and your car is trapped behind it, a live person picks up at (877) 610-2993 and we treat it as the emergency it is.

Automatic Gate Repair

Automatic gate repair in Farmers Branch usually runs $195 to $1,100 for residential systems and $850 to $4,200 for commercial slide gates in the Valwood corridor, where Gate Access Control in Farmers Branch handles the heavy cycle counts. The gap exists because industrial park gates run 50 to 100 cycles per day from delivery trucks, and that level of duty cycles through motors, chain drives, and loop detectors at a rate residential hardware never sees. We stock common parts locally so turnaround is fast, and we carry loop detector testers, rack-and-pinion components, and chain-drive sprockets on the truck.

If your automatic gate is stopping halfway, reversing for no reason, or failing to sense a vehicle, call us before you force it. Forcing a gate that’s fighting the operator causes mechanical damage that turns a $300 control repair into a $900 hardware job.

Hinge & Post Repair

Hinge and post repair in Farmers Branch runs $145 to $700. This is the repair we do more than any other in this city, and it’s the one that actually solves the problem instead of masking it. A gate sags in the hinge post, not in the middle. When the expansive black clay under North Texas heaves and shrinks between wet winters and baking summers, hinge posts shift. The gate goes out of plumb. The hinges bind. The frame twists. Every spring, after the soil re-wets and swells, we see a surge of out-of-plumb gates all over 75234.

We weld on site. We dig out the old footing, pour a deeper and wider base when the soil demands it, and rehang the gate with proper hinges. Your gate stays in your driveway the whole time. We don’t haul it off or swap parts that don’t need swapping.

Gate Realignment

Gate realignment in Farmers Branch runs $180 to $550. When a swing gate scrapes the driveway or a slide gate jumps its track, the fix starts with figuring out why it moved. In this city, the answer is usually the clay. Seasonal soil movement tilts posts and shifts the entire frame, so realigning means more than adjusting hinges. It means re-plumbed posts, rebuilt pivot points, and operators recalibrated to the new geometry.

Last spring we reset a tilted hinge post on a ranch-style home off Belt Line Road where the black clay had heaved two inches after heavy rains. The swing gate was binding so badly the LiftMaster operator stalled twice a day. We dug out the old footing, poured a deeper, wider base, rehung the gate with new FAAC hinges, and realigned the safety photocells. Now it cycles clean without tripping the entrapment protection. That’s the fix that holds. Swap the hinge on a leaning post and you’ll fix it twice.

Trusted Brands We Service in Farmers Branch

We’re certified to service nine major gate brands, and in Farmers Branch we work most often with Linear, Viking, and DoorKing equipment. Linears show up all over the 1960s-era residential retrofits. DoorKings and Vikings are common in the Valwood commercial slide-gate applications. We stock parts for all three locally, which keeps turnaround short when a control board fails or a receiver stops talking to a remote. If your gate runs something else, odds are we service that too: LiftMaster, FAAC, BFT, Ghost Controls, Elite, and Mighty Mule are all in our wheelhouse. Tell us the brand and model when you call and we’ll tell you whether parts are on the truck or a day out.

Common Gate Repair Problems We See in Farmers Branch Homes

• Hinge posts leaning from expansive clay. North Texas sits on Vertisols, a black clay that swells when wet and shrinks when dry. Farmers Branch neighborhoods north of Belt Line Road feel it worst because the 1960s and ’70s ranch homes were built with shallower post footings than modern code requires. Every spring, after the soil re-wets, posts shift and swing gates go out of plumb. The fix is a deeper, wider footing, not a bigger hinge.
• Wrought-iron gates with corroded hinges and cracked welds. Those ornamental driveway gates were installed as original or early-era upgrades 40 to 60 years ago. Decades of Texas sun, rain, and humidity have eaten through paint and started rust inside the joints. We grind down the corrosion, weld on site, and re-paint so the repair blends in. If the gate is sagging and scraping the driveway, it’s almost always repairable, not a replacement job.
• Chain-drive slide gate operators failing in Valwood Industrial Park. Many of those operators date to the 1990s and now see 50 to 100 delivery truck cycles per day. Motors burn out. Loop detectors start missing trucks. Chain stretches and sprockets wear. We replace operators, tune chain tension, and wire in new detection loops so your fleet yard doesn’t lose an hour every morning waiting for a gate that won’t open.
• Safety photocells misaligned after any post or hinge work. Once a gate moves, even a quarter inch, the entrapment protection can trip and stop the gate mid-cycle. Anyone who fixed your gate without rechecking the photocells left the job half done. We realign and test them on every service call, because a gate that reverses unpredictably is a liability.

Pricing for Gate Repair in Farmers Branch, TX

We Also Serve Cities Near Farmers Branch

We run calls throughout the northwest Metroplex. If you’re in Addison, Carrollton, Irving, or Coppell, our Gate Repair crew covers you too. Carrollton and Addison skew more residential, so the work there is different from the commercial-heavy slate we handle in Farmers Branch. Same team, same 90-Day Done Right Promise.

FAQs - Gate Repair in Farmers Branch