Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Farmers Branch
Gate parts and welding in Farmers Branch usually breaks down to one question: can the hinge post be saved, or does it need to be cut out and reset? Hal Gatewood and our crew fix the gate in your driveway, weld on site, and quote the price before any work begins. We know the black clay off Belt Line Road, the 1970s ironwork in the ranch neighborhoods, and the slide gates out in Valwood Industrial Park that run 50 times a day. Call (877) 610-2993 and a live person answers. Not a voicemail. Not a call center. The name is on the shop, and the shop is down the road.
Why Gatewood Fence & Gate Is Farmers Branch’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and he still answers the phone himself more nights than not. Serving Farmers Branch means understanding two very different worlds: the 1960s and 1970s ranch homes south of 635 that still have their original ornamental iron driveway gates, and the Valwood corridor where a slide gate sees more cycles in one week than a residential gate sees in a year. We send someone who knows both.
Farmers Branch customers call us because the last company quoted one number on the phone and a different number at the door. That doesn’t happen here. The price is written down and agreed before any welding starts. Every job comes with the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no arguing about whose fault it was.
Our Gate Parts & Welding team stocks hinges, posts, rollers, rack and pinion, loop detectors, and weld plate for the brands most common in this city. We’re background-checked and uniformed. But more important than that, Hal’s address is published and his license number is on every invoice. You can drive to the shop and look him in the eye.
Our Gate Parts & Welding Services in Farmers Branch
Hinge Replacement
Hinges on 40-60 year old iron gates in Farmers Branch don’t just squeak. They corrode from the inside out, crack at the weld, and let the gate sag until it drags pavement. We cut out the bad hinge, clean the post, weld a new heavy-duty hinge or pivot plate in place, and get the gate swinging level again. If the post itself is rotten or rusted through, we’ll tell you before we touch the hinge. Fix the hinge without fixing the post and you’ll fix it twice.
Post Replacement
The expansive black clay under Farmers Branch heaves and shrinks with the seasons, and the first thing to move is a gate post. A post that was plumb in October can be out by two inches in April. We dig out the old footing, set the new post, and re-weld the gate to it. On our more involved post work, we use deeper footings than the original 1970s installers bothered with. The gate stays put. The next spring heave doesn’t win.
Rail Repair
Bottom rails on old iron gates collect water and rust from the inside. We see it constantly in the ranch-style neighborhoods north of Belt Line Road. The rail gets thin, the welds crack at the pickets, and the whole gate flexes when the opener pushes it. We weld in new solid rail sections, reinforce stress points, and match the work to the existing design so it doesn’t look like a patch job. It’s repair, not replacement, whenever the steel is still sound.
Custom Welding
For a commercial slide gate in Valwood or a driveway swing gate that needs an extra few inches of clearance, we weld on site. We fabricate plate brackets, reinforce cracked frames, modify gate widths, and build up worn hinge surfaces without hauling the gate back to some shop across the metro. The gate stays in your driveway. You watch it get fixed. That’s the whole idea.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Farmers Branch
We service operators and hardware from DoorKing, Linear, and Viking, which covers most of what’s installed across Farmers Branch, and we also offer our Gate Motor & Opener in Farmers Branch solutions. The old DoorKing units out near Valwood run chain-drive operators with loop detectors that have been dying for years. We keep replacement boards, loops, and rack sections on hand or sourced same-week for Farmers Branch clients. If your opener is a brand we don’t stock parts for, we’ll be honest about it and order it. We don’t pad the markup.
Common Gate Parts & Welding Problems We See in Farmers Branch Homes
- Posts out of plumb every spring. The clay under the city swells after wet winters and drops in the summer bake. Gates that bind in March were fine in December. We reset the post and weld the gate back level.
- Corroded iron hinges on 1970s driveway gates. The original hinges on those ranch-home gates are close to 50 years old. They crack at the weld and let the gate drop. We replace the hinge, not the whole gate.
- Cracked welds at the bottom rail and pickets. Moisture sits in the rail and rots the steel from inside. The weld cracks first. We grind it clean and weld in a solid replacement section.
- High-cycle Valwood slide gates eating rack and pinion teeth. A gate that opens 60 times a day wears out rack sections and strips teeth fast. We stock replacement rack and weld new sections in before the opener starts slipping.
Pricing for Gate Parts & Welding in Farmers Branch, TX
A hinge replacement on a residential iron gate in Farmers Branch typically runs $180-$340 depending on the hinge type and how much welding is needed. Post replacement with a new footing usually starts around $350 and goes up to $800 or more if the clay has shifted the post badly and we have to re-hang and re-align the gate. Custom welding and rail repair fall between $150 and $500 depending on the length of the section and how much fabrication we’re doing. A full gate replacement is a bigger number, but often the cheaper answer in the long run if the post and rail are both gone. We’ll tell you which one makes sense before we spend your money. No trip charge inside Dallas County, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll walk you through the price. The quote is free and the estimate we give you is the price you pay. Always.
We Also Serve Cities Near Farmers Branch
If you’re in Farmers Branch today, we’re probably close by. We also run calls to Addison, Carrollton, Irving, and Coppell. Most of the time we can be at a Farmers Branch gate the same day, especially when the gate is stuck open or stuck shut.
Serving Farmers Branch, TX - Our Local Coverage Area
We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Farmers Branch
The North Texas black clay under the city expands when it soaks up winter rain and contracts in the summer heat. That movement pushes gate posts out of plumb, and the post pulls the gate with it. We reset the post and weld the gate back to it each spring for homeowners across Farmers Branch. Call (877) 610-2993 if your gate is scraping or binding. It won’t fix itself.
Yes, in most cases. We cut out the bad post section, weld in a new heavy-duty post or sleeve, and re-hang the original gate. It’s faster and cheaper than a full replacement, and your gate stays in your driveway the whole time. If the gate itself is rusted past saving, we’ll say so before any work starts.
Chain-drive operators fail first, followed by loop detectors and rack and pinion teeth. The constant cycling strains the motor, stretches the chain, and burns out safety edges. We service these high-cycle gates regularly and keep rack sections and loop replacement parts ready for Valwood Industrial Park customers. Call (877) 610-2993 for a preventive maintenance check. It’s cheaper than a downed delivery gate.
No. A cracked weld means the gate is already moving in ways it wasn’t designed to. It will get worse, and a heavy iron gate that separates from its post is dangerous. Shut it manually if you can and call us. We’ll weld it back solid and check the rest of the frame. In Farmers Branch, we see this regularly on original gates from the 1960s and 1970s era around Belt Line Road.
Yes. Older DoorKing and Linear units often lack modern safety photocells. We install and align them as part of our Gate Access Control in Farmers Branch services, and make sure everything is UL 325 compliant before we leave. It’s not optional. If a gate can close on a car, a kid, or a delivery truck, it needs working sensors. Call (877) 610-2993 and we’ll set it up.
Call Gatewood Fence & Gate for Gate Parts & Welding in Farmers Branch
If your gate is sagging, stuck, or splitting at the weld, or you need Gate Installation - Farmers Branch service, call us at (877) 610-2993. Hal Gatewood or one of his crew will answer. We’ll get to Farmers Branch, look at the gate, and give you a real price before we touch a wrench. Free estimate, written 90-Day Done Right Promise, no trip charge inside Dallas County. The name is on the shop. That’s the oldest guarantee there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Farmers Branch with Gate Parts & Welding since 2001.