Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Enterprise
Gate repair in Enterprise, NV usually means one of three things: a builder-grade operator finally quitting in the heat, a sagging hinge post on a 15-year-old wrought-iron gate, or an HOA entrance system that has to be fixed before the board notices. We get to Enterprise fast, quote the job before any work starts, and most repairs are finished the same visit. Call (877) 610-2993 and Hal Gatewood will be the one who answers or gets back to you within minutes.
We have been welding, rewiring, and realigning gates in the Las Vegas Valley since 2001, and we know Enterprise’s neighborhoods better than most shops that just pass through on their way to somewhere else.
Why Gatewood Fence & Gate Is Enterprise’s Preferred Gate Repair Company
Enterprise is different from the older parts of the valley. Almost every home here sits in a master-planned community with HOA standards, and the gates were installed in clusters during the 2000s building boom. That means the failures come in waves. When one Southern Highlands entrance gate goes down, three others nearby are usually a few months behind. We know that pattern, and we stock parts for it.
Hal Gatewood started this shop in 2001 and his name is still on the truck, the invoice, and the door. No franchise, no rotating techs from three states away. The person who shows up at your home in the 89139 zip knows Enterprise because he lives nearby and drives these streets every week. Reviews from Enterprise customers consistently mention the same two things: we answer the phone, and we do what we said we would do.
Our Gate Repair team handles everything from single driveway swing gates to multi-unit HOA perimeter systems. And every job carries our 90-Day Done Right Promise in writing. If it is not right, one call brings us back. That is the whole guarantee. That is also why seniors and veterans get a permanent 10% discount, and why we offer $40 off any repair over $200. No haggling, no fine print.
Our Gate Repair Services in Enterprise
Electric Gate Repair
A dead keypad, a board that keeps tripping, or a motor that hums but will not move, those are the calls we get most from Enterprise homeowners. The 115°F summers bake control boards inside the operator housing, and we carry replacements and repair boards for LiftMaster, Viking, and DoorKing so we can usually fix it in one trip instead of ordering parts and coming back next week.
Automatic Gate Repair
Enterprise’s 2000s-era homes were often built with builder-grade automatic openers that were undersized for the gate they were asked to move. Fifteen to twenty years later, those motors are failing all at once. We replace them with properly rated operators and, where your HOA requires it, match the housing and finish to the community’s appearance standard. We also retrofit manual gates that were never automated, which is a big chunk of our work in the newer subdivisions going up along the south edge of the 89139 zip.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. In Enterprise, the alkaline desert dust gets into the hinge pins and accelerates wear, and the heat warps aluminum frames just enough to throw the whole gate out of plane. We weld on site, rebuild the post if it is rotted or cracked, and hang the gate so it closes square. Fix the panel without the post and you will fix it twice.
Gate Realignment
Slide gates in Enterprise bind because caliche dust works into the track rollers and the rack-and-pinion drive. We clean and re-lube the track, true the rollers, and re-set the travel limits so the gate does not slam or stall. On swing gates, realignment means re-hanging the leaf so the latch catches and the operator does not fight the load. Most realignments are same-day work, and the price is quoted before we pick up a tool.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Enterprise
We are certified to service nine major gate brands, and in Enterprise we see a lot of Viking, Ghost Controls, and Elite units on the residential side, with DoorKing and LiftMaster on HOA perimeter systems. We stock local parts for those brands specifically, which shortens turnaround when your community entrance gate goes down on a Friday afternoon. If we do not have the board or the gearbox on the truck, we can usually have it in hand the next morning.
Common Gate Repair Problems We See in Enterprise Homes
- Builder-grade operator failures from the 2000s boom. Homes built between 2003 and 2008 in Enterprise got whatever opener the developer could buy in bulk. Those capacitors are swelling and those boards are overheating right now, all over the 89139 zip.
- Gates installed manual during initial construction. A lot of newer Enterprise homes were built with a nice wrought-iron or aluminum gate but no power run to it. Automating it later means trenching through caliche-heavy soil and running surface-mounted conduit that the HOA will inspect. We do it to UL 325 standards, with entrapment protection included.
- Alkaline caliche dust killing slide-gate tracks. Enterprise still has active grading on undeveloped lots, and that fine, gritty dust gets into track rollers and operator gearboxes faster than anywhere else in the valley. It binds, it wears, and it shortens the life of the drive gears.
- HOA entrance gate synchronization. Multi-unit perimeter gates that serve whole communities in Enterprise fail in clusters because they were installed at the same time and are aging at the same rate. When one goes down, the board usually asks us to inspect the others while we are there.
Pricing for Gate Repair in Enterprise, NV
A typical electric gate repair in Enterprise runs $180 to $340, depending on whether we are replacing a board, a capacitor, or a limit switch. Automatic gate operator replacement, including the new motor and programming, usually lands between $850 and $1,600 for a residential swing gate in the 89139 zip. Hinge and post repair runs $250 to $600, and a full gate realignment is typically $150 to $350. If you have a written estimate from another company, we will give you a free second opinion on it. Every price is quoted and agreed before we start, and that quoted number is what you pay. The $40 off any repair over $200 and the 10% senior and veteran discount apply to most jobs. Call (877) 610-2993 and we will give you a real number over the phone, not a range with fine print attached.
We Also Serve Cities Near Enterprise
Our crews are in the south valley every day, so when we finish an Enterprise job we are often a short drive from Spring Valley, Paradise, Winchester, and Las Vegas. If you own property near the Enterprise border or manage a gate in a nearby community, the same crew and the same 90-Day Done Right Promise apply. Learn more about Gate Repair in Enterprise or call us directly, we cover the whole area without a trip charge inside the county.
Serving Enterprise, NV - Our Local Coverage Area
We’re based in the Enterprise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Enterprise
Enterprise’s HOA entrance gates fail in clusters because they were installed during the same mid-2000s construction boom and are now hitting their 15-to-20-year service life simultaneously. The original operators were builder-grade, often undersized for daily use, and the boards overheat in the 115°F summers while alkaline dust lingers in the housing. Call (877) 610-2993 and we can inspect your community’s remaining gates before the next one goes down.
Yes, we automate manual gates in Enterprise regularly, and the work is more involved here because most lots sat over caliche-heavy soil and were not pre-wired for a power run. We trench the conduit, surface-mount where the HOA prefers it, install a properly rated operator, and add UL 325 entrapment protection like a safety photocell before the board does its walkthrough. Estimates are free and the price never changes after you approve it.
In Enterprise, the dominant slide-gate issue is caliche dust binding the track rollers and wearing the rack-and-pinion drive, while Summerlin’s older gates more often need structural hinge and post work. The desert dust load in Enterprise is heavier because grading is still active on undeveloped lots, and we clean and re-lube tracks on nearly every service call here.
Yes, most Enterprise HOAs, including communities in Southern Highlands, require architectural review for any changes to a gate that is visible from the street, including operator replacement and conduit runs. We coordinate with board standards and appearance requirements before work begins, and we match finishes and housing styles so the repair does not get flagged in the next community walkthrough.
Gate hinges fail in the Las Vegas heat because sustained 115°F temperatures cause aluminum and steel components to expand and contract daily, while alkaline dust accelerates wear on the hinge pins. In Enterprise, that is compounded by the dust load from ongoing grading, which is why we inspect, clean, and re-lube hinges on every realignment call, not just when a hinge has already cracked.
Call Gatewood Fence & Gate for Enterprise Gate Repair
If your gate is sagging, stalling, or dead at the keypad, call (877) 610-2993 right now. A live person answers, day or night, and Hal will tell you straight what it will take to fix it and what it will cost. You get a price before we start, a written 90-Day Done Right Promise on every job, and a name you can verify. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Enterprise since 2001.