Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Enterprise
Gate parts and welding in Enterprise, NV is not a one-size-fits-all job. The gates here were built in a very specific window, and they fail in very specific ways. Most calls we take from the 89139 zip code involve mid-2000s builder-grade operators that were undersized the day they went in, or manual swing gates now getting automation retrofits the original post footings were never meant to carry. We stock the parts, we weld on site, and we know what an HOA appearance review is going to ask before the board does. Call (877) 610-2993 and a live person picks up, any hour.
Why Gatewood Fence & Gate Is Enterprise’s Preferred Gate Parts & Welding Company
Hal Gatewood has been owner-operating this shop since 2001, and the name on the truck is the name on every invoice. Enterprise customers don’t get a rotating cast of strangers. They get Hal or his crew, background-checked and uniformed, showing up with a welder in the truck and the parts that actually match what was installed fifteen or twenty years ago. The local reputation here was built one HOA entrance at a time. Strong reviews from Enterprise homeowners mention the same two things over and over: the price quoted is the price paid, and the person who shows up can actually diagnose the problem instead of selling a full replacement.
Enterprise sits in a strange spot for service coverage. It’s not far from the Las Vegas metro office, but the traffic patterns on I-15 and St. Rose Parkway can turn a short map distance into a long dispatch. We know those routes and we plan around them. Same-day response to Enterprise is common on repair work, not something we promise and then quietly miss. And because the 90-Day Done Right Promise is in writing on every job, if a weld cracks or a roller binds inside that window, one call brings us back without a runaround.
Our Gate Parts & Welding Services in Enterprise
We focus on repair-first work. If a gate can be rebuilt in place, that’s what we do. Here are the four services Enterprise calls us for most:
Hinge Replacement
Enterprise homes from the 2000s often have ornamental iron gates hung on hinges that were never rated for the gate’s actual weight. Over 15 to 20 years the hinge barrels elongate, the gate sags, and the latch no longer lines up. We cut out the old hinge, weld in a heavier-gauge barrel or a commercial ball-bearing hinge, and realign the gate so it swings level. The post is usually the root cause though, not the hinge itself, and we’ll tell you that before we touch anything.
Post Replacement
This is the big one in Enterprise, especially on stucco homes where a manual gate is being automated for the first time. The original post footings from the mid-2000s were poured for a gate that a person pushed open by hand. Put a Gatecrafters or Ghost Controls arm on that post without addressing the footing and you’ll get deflection within a year. We cut the slab, re-pour a proper footer with rebar, weld in the new post, and only then bracket the operator. It’s slower than the guy who just bolts on an opener and leaves. It’s also the only way the gate stays true for another twenty years.
Rail Repair
Slide gates in Enterprise, especially the commercial-grade units on HOA perimeter entrances, get eaten by two things: the weight of the gate itself and the caliche dust that packs into the track and rack. We see rail sections that have worn thin at the roller path, rack teeth that are half-stripped from pinion grind, and guide rollers that have been run flat on one side. We straighten, weld, and sleeve worn rail sections in place rather than hauling the whole gate to a shop. The gate stays in your driveway or your community entrance where it belongs.
Custom Welding
Sometimes the part doesn’t exist anymore. A 2006 gate from a builder whose original fabricator is long gone means you can’t order a replacement picket or a matching post cap. That’s what the welder is for. We fabricate pickets, stiffeners, post caps, latch plates, and hinge reinforcement brackets on site, matched to the existing profile and finish. Enterprise homeowners also bring us smaller jobs: a bent gate frame from a wind gust, a broken decorative scrolled piece, a cracked top rail on a double swing gate. If it’s steel or aluminum and it can be welded, we’ll do it in the driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Other Gate Parts We Keep On Hand for Enterprise
Beyond the big four, we routinely handle gate rollers, latch and lock replacement, and post stiffening plates. Rollers are a constant in Enterprise because of the dust load. The fine alkaline caliche blowing off still-graded lots in the southern end of the zip code works its way into every exposed bearing surface on a slide gate. We clean and re-lube tracks on nearly every service call here, and we keep sealed rollers in stock for that exact reason. Latches and locks on HOA perimeter gates get upgraded to magnetic locks or keypad-compatible releases when the community wants access control added to a gate that started life as a simple swing unit. For a full picture of our Gate Parts & Welding work, that page covers the broader service area and repair philosophy.
Trusted Brands We Service in Enterprise
We’re certified to work on nine major gate brands, and three of them show up constantly in Enterprise: LiftMaster on residential swing gates, Elite on HOA slide gates, and FAAC on the larger commercial perimeter entrances. We also service Viking, Ghost Controls, DoorKing, Linear, BFT, and Mighty Mule. Because we know which boards and which operator models were installed in Enterprise during the 2000s boom, we keep the common failure parts on the truck rather than having to order everything from a distributor. That means less downtime on a community entrance that two hundred cars pass through every morning.
Common Gate Parts & Welding Problems We See in Enterprise Homes
- Builder-grade operator boards burning out in the 115°F heat. Mid-2000s Enterprise builders frequently installed LiftMaster or Elite units that were sized for light residential use but ended up cycling dozens of times per day on busy HOA entrances. Under that load, and with summer temperatures regularly exceeding 115°F, circuit boards fail years earlier than manufacturer ratings suggest.
- Hinge post deflection on automated manual gates. A 2000s stucco home with a decorative iron swing gate almost always has an undersized post footing. Add an operator arm and the post starts to lean within months. We inspect the post before recommending automation, and we’re honest when the slab needs cutting and re-pouring first.
- Missing conduit and power runs forcing retrofits. Original construction in many Enterprise subdivisions didn’t include conduit from the house to the gate, so adding an operator means either trenching, surface-mounting wire in weatherproof raceway, or going solar. The caliche dust coats exposed wiring and photocell lenses quickly, which means those installations need more regular cleaning than they would in an older, fully built-out part of the valley.
- Rack-and-pinion wear from caliche dust, not just from use. On slide gates, the problem isn’t always the motor. Enterprise’s fine alkaline dust packs into the rack teeth and the pinion housing, grinding both down and causing the gate to jump the rack under load. Clearing the teeth and replacing the pinion gear usually fixes the jumping without replacing the whole operator.
Pricing for Gate Parts & Welding in Enterprise, NV
Here’s what you should expect to pay in Enterprise’s market. Hinge replacement on a residential swing gate typically runs between $180 and $420 depending on hinge type and whether the post needs reinforcement. Post replacement with a re-poured footing is a larger job: $600 to $1,800 depending on post size, gate weight, and access. Rail repair, including welding and sleeving worn sections, usually lands between $250 and $800. Custom welding jobs are quoted by the piece, commonly $120 to $400 for gate frame repairs, picket replacement, or latch plate fabrication. Every quote is written and agreed to before any work starts, and we don’t add charges at the door. Call (877) 610-2993 for a free estimate. We also offer $40 off any repair over $200, and seniors and veterans get a permanent 10% discount.
We Also Serve Cities Near Enterprise
Our service area for Enterprise reaches into the surrounding valley. We cover Spring Valley, Paradise, Winchester, and Las Vegas with the same local response and the same written 90-Day Done Right Promise. Whether you’re in Enterprise or one of the communities next door, the phone number is the same and a live person answers it.
Serving Enterprise, NV - Our Local Coverage Area
We’re based in the Enterprise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Enterprise
The fine dust blows off still-graded lots and packs into the rack teeth and pinion housing, where it grinds the gear surfaces and causes the gate to jump the rack under load. The fix is clearing the teeth, replacing worn pinion gears with sealed units, and adding a schedule of regular track and housing cleaning. Call (877) 610-2993 and we’ll clean it, lube it, and quote any parts it actually needs, free of charge to assess.
Usually yes, and often the operator is not even the real problem. The rack, rollers, and post footings have their own wear, and replacing the operator without addressing those just burns through another board. We’ll rebuild the mechanicals, re-weld any cracked post footings, and install a new board only if the old one is genuinely dead. Rebuilding a 2006 unit often costs less than half of a full operator replacement. Call (877) 610-2993 for an on-site look.
Sometimes yes, but only after we check the post footing. Many Enterprise manual gates from that era were mounted on posts with footings too shallow for the added force of an operator arm. If the footing is sound and the post is plumb, we can bracket an operator directly. If not, we’ll quote a post replacement and re-pour first so the operator doesn’t tear the post out inside a year. Estimates are free, and the price is agreed before any work starts.
Top rail cracks at the mid-span, especially on long double swing gates where one panel gets caught by wind. The heat softens aluminum over time, and the repeated stress of the gate being pushed past its normal arc cracks the rail at the weld joint. We weld in a reinforcing sleeve or a full replacement rail section and match the finish so the repair doesn’t stand out. Call (877) 610-2993 and we’ll quote it before we touch a single weld.
Almost certainly yes, and we’ll help you navigate it. Most Enterprise HOAs require board or architectural review before any exterior gate work on community property or on private lots with appearance standards. We know what those committees look for, we can provide written specs and material callouts for the application, and we’ll schedule the work around the approval timeline. Same number, same live answer: (877) 610-2993.
Call Gatewood Fence & Gate for Gate Parts & Welding in Enterprise
If you’ve got a gate that’s sagging, jumping its rack, or the post has started to lean, call (877) 610-2993. Hal will tell you straight what needs welding, what needs parts, and what doesn’t need touching at all. We’ve been doing this since 2001, we answer the phone with a live person 24/7, and every job in Enterprise carries the 90-Day Done Right Promise in writing. Free estimates, upfront pricing, and no trip charge inside the county. The name is on the shop, and the shop is down the road, that’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Enterprise since opening our doors in 2001.