Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across El Granada
Gate repair in El Granada usually runs $180-$650 depending on whether we’re replacing hinges, welding a rusted frame, or rebuilding an operator board that salt fog has chewed through. Most jobs are done in one visit because we weld on site and carry marine-grade hardware in the truck. If your gate is sagging, jamming, or the motor just hums and won’t move, call (877) 610-2993 and you’ll get a live person who can usually have a crew at your place the same day.
We know El Granada’s streets and driveways, from the beach cottages off Avenue Alhambra to the newer builds climbing the hills above the harbor. This isn’t San Bruno or Redwood City. The salt air here changes how a gate fails, and that changes how we fix it.
Why Gatewood Fence & Gate Is El Granada’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and his name is still on the invoices. That matters in a place like El Granada, where the fog rolls in most mornings and the ocean sits close enough to hear. Gates here fail differently than they do twenty miles inland, and a company that doesn’t work the coast weekly won’t spot the difference until they’ve quoted you for the wrong repair.
Our Gate Repair team has pulled hundreds of corroded hinge posts and seized operators out of El Granada driveways. We know the 94018 housing stock: mid-century beach cottages with original wood gates, 1970s ornamental iron that was never spec’d for oceanfront exposure, and newer automatic gates that people assumed would be maintenance-free. They aren’t, especially here.
When you call, a live person answers around the clock. No phone tree. No call back tomorrow. Hal or someone from his crew will show up in the window we gave you and explain what actually failed, then quote the price before any work begins. Every repair carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back.
Key takeaways:
- El Granada’s salt-laden marine air corrodes gate hinges, posts, and operator boards years faster than inland Peninsula locations.
- We weld on site, so your gate stays in your driveway instead of being hauled off to some shop.
- Upfront pricing, quoted and agreed before we start. Free estimates. No trip charge inside the county.
- Live person answers 24/7 at (877) 610-2993.
Our Gate Repair Services in El Granada
Electric Gate Repair
Electric gate repair in El Granada typically runs $220-$480. The marine layer here doesn’t just wet the outside of your operator; it condenses inside the control board and photocells. We regularly open operators that look dry on the outside and find the board pitted with corrosion from months of internal condensation. We service Linear, Viking, Ghost Controls, and DoorKing swing and slide operators across El Granada, replacing boards, wiring, safety photocells, and limit switches with Gate Access Control - El Granada components that hold up better in coastal conditions.
Automatic Gate Repair
When an automatic gate in El Granada stops mid-swing or reverses for no reason, the cause is almost always environmental. Salt aerosols settle into the motor housing and limit switches, and that persistent moisture plays havoc with sensitive electronics. We test the full loop: motor, board, edges, photocells, and the physical gate movement, because fixing the board without addressing a corroded hinge post means you’ll call us again in eight months. Automatic gate repair here runs $250-$600 depending on components.
Hinge & Post Repair
This is the repair we do most in El Granada. Hinge and post repair costs $180-$420 depending on whether we’re replacing hardware or digging out and welding in a new post footing. A gate sags in the hinge post, not in the middle. On the coast, the post fails first, and on west-facing gates the failure is always worse on the windward side. We replace galvanized posts with stainless, swap steel hinges for 316 stainless, and reinforce the footing so the next decade of ocean wind doesn’t lean the whole assembly out of plumb.
Gate Realignment
Gate realignment in El Granada runs $150-$350. Constant damp shrinks and swells wood gate frames, and salt corrosion gradually shifts the geometry of metal frames. An adjustment alone is rarely enough here; we correct the alignment and then address why it went out, whether that’s a post pulling loose, wood swelling in the fog, or hinges that have worn oblong from years of wind load.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in El Granada
We service the El Granada Gate Motor & Opener brands you’re most likely to find on local properties: Linear and DoorKing on older installs, Viking and Ghost Controls on newer automatic gates. Because we’re certified across those brands and stock the common coastal-failure parts locally, we can usually rebuild a controller or replace a safety edge the same day instead of ordering from a distributor and making you wait a week with a gate that won’t close. For El Granada specifically, we stock stainless hinge hardware and marine-rated fasteners because we go through them at a rate no inland shop could plan for.
Common Gate Repair Problems We See in El Granada Homes
- Windward-face hinge and latch corrosion. Gates facing west or southwest directly into the ocean wind rot on the salt side while the leeward side looks fine. Homeowners only notice after the gate jams or the latch snaps, and by then the hinge barrels are usually gone too.
- Galvanized posts perforating at the footing. Constant salt saturation from the marine layer eats galvanized post footings within about 24 months. We see posts that look solid above ground but have rusted through right at the concrete line on the load-bearing side.
- Operator board and photocell failure from fog condensation. El Granada’s fog often doesn’t fully burn off, and that means operators run in damp conditions all year. Internal condensation shorts boards and fogs photocell lenses until the safety circuit refuses to close.
- Original mid-century wood gates rotting at the joints. A lot of the 1950s-1970s beach cottages around El Granada still have their original wood gates, and after decades of salt and fog the joints and hinge mount areas swell, splinter, and pull away from the hardware.
Pricing for Gate Repair in El Granada, CA
Here are the ranges we quote most for gate repair in El Granada:
- Hinge and post repair: $180-$420 depending on whether we’re replacing hardware or welding in a new post footing.
- Electric gate and opener repair: $220-$480 for board, wiring, photocell, or limit switch work.
- Automatic gate repair (full system): $250-$600 when the motor and safety circuit both need attention.
- Gate realignment: $150-$350 for mechanical correction and frame adjustment.
- Weld and rust repair: $180-$550 depending on how much frame steel needs cutting out and replacing.
The quote you get is the price you pay, agreed before we start work. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near El Granada
Our El Granada crew regularly works up and down the coast and over the hill. We cover Half Moon Bay, Hillsborough, Millbrae, and Burlingame with the same owner-operated model and the same 90-Day Done Right Promise. If you’re in one of those cities and your gate is failing, we’ll give you the same straight answer and upfront pricing.
Serving El Granada, CA - Our Local Coverage Area
We’re based in the El Granada area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in El Granada
Your gate rusts on one side because El Granada’s prevailing ocean wind drives salt spray directly against the windward face of the gate while shielding the leeward side. The west- and southwest-facing sides take direct salt aerosol year-round, so the hinges, latches, and post hardware on that face corrode through long before the protected side shows any wear. If one side of your gate is rusting and the other looks fine, the hardware is already close to failure. Call (877) 610-2993 and we’ll replace the windward hardware with 316 stainless before the gate jams.
In El Granada you should lubricate gate hinges every two to three months, which is about three times more often than inland San Mateo County requires. The salt-laden marine layer strips standard lubricants fast and pushes salt into the hinge barrels. For coastal gates we recommend a marine-grade lubricant, and we check hinge bores for corrosion during every service visit so the lube isn’t hiding a deeper problem.
In most cases we can repair your original El Granada beach cottage gate, especially if the damage is at the hinge mounts or the lower frame rails where moisture collects. We weld new steel into rusted frames with our Gate Parts & Welding in El Granada, replace rotten wood sections, and rebuild hinge points rather than tearing out a gate that’s been on your house since the Coastside was platted. Replacement only becomes necessary when the frame has lost structural integrity across more than a third of its length, and we’ll show you exactly why before recommending it. Call (877) 610-2993 for a free assessment.
The operators that survive El Granada’s fog are ones with sealed, conformal-coated boards and marine-rated enclosures built for constant humidity, not just occasional rain. We’ve pulled two-year-old operators off beach cottages that were pitted internally from condensation while the outside looked fine. If you’re replacing an operator, we spec units rated for coastal humidity and we wire the connections with sealed connectors. The extra cost is small compared to replacing a board every two years.
Yes, your slide gate in El Granada needs significantly more attention to the track and rollers than the same gate would inland. Salt settles into the track, mixes with fog moisture, and grinds the roller bearings. Inside the steel V-track it corrodes from the base up, which is why we see slide gates here binding not because the track is dirty, but because it’s rusting from the salt load. We recommend cleaning and treating the track quarterly and checking the rollers for pitting every six months. For slide gate repair or a maintenance plan, call (877) 610-2993.
Call Gatewood Fence & Gate for Gate Repair in El Granada
If your gate is sagging, jamming, or the opener has stopped responding, call us at (877) 610-2993. You’ll talk to a live person, get a straight answer, and we’ll schedule a free estimate at a time that works for you. Every repair is quoted and agreed before we start, and every job carries the 90-Day Done Right Promise. We’ve been doing this since 2001, and we’re not going anywhere. The name is on the shop.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving El Granada since 2001.