Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across El Granada
If your gate is sagging, rusting, or stuck halfway open in El Granada, the fix usually comes down to the right parts and a welder who actually works on site. We replace hinges, posts, rails, rollers, and latches, and we weld in your driveway so the gate never leaves your property. Gatewood Fence & Gate has been owner-operated since 2001, and Hal Gatewood still answers the phone himself. Call (877) 610-2993 for a free estimate on gate parts and welding in El Granada, including 94018 and the surrounding Coastside.
El Granada is not like working in Redwood City or San Mateo. The salt fog here eats hardware alive. We know that because we work these streets every week, from Avenue Alhambra to the older pockets near the harbor. A hinge that looks fine from the leeward side can be rusted nearly through on the ocean side. That’s the kind of thing you only learn by fixing gates in this specific town, not by reading a parts catalog.
Why Gatewood Fence & Gate Is El Granada’s Preferred Gate Parts & Welding Company
We are the repair-first shop. Other companies want to sell you a whole new gate when a hinge post rots or a rail cracks. We weld the frame back solid, hang new stainless hinges, and send you a bill for a repair, not a replacement. Hal Gatewood’s name is on the shop, the shop is down the road, and that is the oldest accountability there is. Our Gate Parts & Welding crew has been fixing gates on the San Mateo County coast long enough to know which brands hold up in salt air and which ones don’t.
When you call Gatewood Fence & Gate, a live person answers. Not a voicemail. Not a menu. Not a call center three states away. And when we say we’ll be there in a certain window, the person who shows up is someone whose work you can check against our published address and license number. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No fine print, no runaround.
We’re certified to service FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. For El Granada customers that matters more than it might elsewhere, because the marine layer here tests every brand’s limits. A control board that lasts fifteen years in Hillsborough can fault out in eight years here. We stock the parts that actually fail in this environment, so we’re not waiting a week on a board while your gate sits open.
Our Gate Parts & Welding Services in El Granada
Hinge Replacement
In El Granada, hinge replacement is rarely a simple swap. The windward hinge post takes the brunt of the salt-laden marine air, and we regularly find the hinge itself rusted through while the matching hinge on the other side still turns freely. We replace gate hinges with marine-grade or stainless components spec’d for coastal exposure, not the zinc-plated hardware that fails within eighteen months out here. A typical hinge replacement in El Granada runs $140-$260 per pair, including alignment and re-hanging the gate leaf.
Post Replacement
A gate sags in the post, not in the middle, and that is where we start. El Granada’s older beach cottages often still have original wood hinge posts set in soil that stays damp nine months of the year. The post rots below grade, the gate leans, and no amount of hinge adjustment fixes it. We pull the old post, set a new one in concrete, and weld the hinge plates back on plumb. Post replacement in El Granada typically runs $380-$720 per post, depending on depth, access, and whether we need to match existing fencing.
Rail Repair
Welded steel rails on ornamental gates crack at the welds after years of wind loading and corrosion. On mid-century El Granada properties, we see a lot of lightweight iron gates with rails that were never built for direct ocean exposure. We cut out the bad section, weld in new steel, and repaint so the repair blends with the original. Rail repair runs $180-$420 per rail section, and we do the work on site so you’re not hauling a gate panel across the hill to a shop.
Custom Welding
When a gate can’t be repaired with off-the-shelf parts, we fabricate what’s needed. That might mean rebuilding a corroded gate frame, welding a new hinge plate onto an existing post, or extending a gate to close a gap after a fence repair. Our welder brings the rig to your driveway in El Granada, and the work is done there. Custom welding is quoted by the job, but most El Granada projects land between $250 and $800 depending on materials and complexity. You get the price before we strike an arc, and it doesn’t change at the door.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in El Granada
We service and carry parts for the operators that show up most often on El Granada properties. That includes FAAC hydraulic and electromechanical operators, BFT slide gate motors, Linear swing gate openers, and Viking residential and light commercial units. We keep common control boards, photo-eyes, limit switches, and capacitor kits on the truck for these brands, which means we can usually complete the repair in one trip instead of ordering a part and leaving your gate hanging. For older operators that the manufacturer no longer supports, we can often identify a compatible retrofit or rebuild the failed component rather than condemning a perfectly good motor.
Common Gate Parts & Welding Problems We See in El Granada Homes
- Windward-face corrosion on hinges and latches. West- and southwest-facing gates take the full force of the Pacific wind, and the salt aerosol penetrates deep into the hinge knuckles. We regularly find hinges rusted nearly through on the ocean side while the leeward hardware still shines. Full hardware replacement is the fix, not lubrication.
- Obsolete control boards on legacy operators. Gates installed in the 1980s and 1990s around El Granada often have control boards that predate current UL 325 entrapment standards. Years of salt-air exposure corrode the board’s connections, and the gate faults mid-travel or refuses to close. Retrofitting a photo-eye pair and replacing the board is frequently cheaper than a new operator.
- Rotted wooden hinge posts on mid-century beach cottages. The original 1950s through 1970s homes here were built on wet ground with wood posts that were never treated for constant moisture. The post rots at ground level, the gate leans, and the panel starts dragging on the driveway. We replace the post and re-hang the gate square.
- Failed gate rollers and track hardware on slide gates. Rack and pinion slide gates near the ocean accumulate salt grit in the roller bearings and track, and the rollers bind up. If ignored, the gate motor burns out trying to push a gate that won’t move. Replacing rollers and cleaning the track is a $160-$380 job, far cheaper than a new motor.
Pricing for Gate Parts & Welding in El Granada, CA
Here is what gate repair and welding work actually costs in El Granada.
- Hinge replacement: $140-$260 per pair
- Post replacement: $380-$720 per post
- Rail repair or welding: $180-$420 per section
- Custom welding or fabrication: $250-$800 per project
- Gate roller replacement: $160-$380 per set
- Latch and lock replacement: $95-$240 installed
- Operator control board replacement: $280-$650 installed
Those are the ranges we quote most weeks for El Granada work. Coastal corrosion and access conditions can push a job toward the higher end, but you will know the exact price before we start, and the price we quote is the price you pay. We also run a standing $40 discount on any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a number you can count on.
Key Takeaways: Gate Parts & Welding in El Granada
- El Granada’s salt-laden marine air corrodes standard gate hardware one to two years instead of a decade inland. Marine-grade and stainless components are not optional out here.
- We repair-first. Hinge replacement, post replacement, rail repair, and custom welding are handled on site, in your driveway.
- Legacy operators from the 1980s and 1990s can often be retrofitted with modern safety photocells instead of replaced outright, saving you hundreds.
- Every job carries the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop and on every invoice.
- Pricing is quoted and agreed before any work starts. $40 off any repair over $200. Seniors and veterans always save 10%.
Town by Town: Gate Parts & Welding Service Across the Coastside and Peninsula
Most of our days are spent in El Granada and the neighboring towns along the San Mateo County coast and peninsula. We also run regular calls in Half Moon Bay and Hillsborough, and we cross the hill for work in Millbrae and Burlingame. Same crew, same repair-first approach, same 90-Day Done Right Promise on every job.
Serving El Granada, CA - Our Local Coverage Area
We’re based in the El Granada area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in El Granada
If you can see rust bloom on the hinge barrel or the knuckle, lubrication won’t save it. El Granada’s marine air works its way inside the hinge mechanism, and once the internal surfaces are pitted, the hinge seizes up again within weeks no matter how much grease you pack in. We replace rusted coastal hinges with marine-grade or stainless hardware, which is the only thing that holds up out here. Call (877) 610-2993 and we’ll assess whether your hinges can be serviced or need to be swapped for stainless.
It can usually be retrofitted, and that’s usually the cheaper move. Older FAAC, BFT, and Viking operators often have a motor and gearbox that still work fine, and the missing piece is entrapment protection. We add a photo-eye pair and update the control board to meet current UL 325 standards, and the gate runs safer than it did when it was new. Retrofit runs $350-$800 depending on the operator model, versus $1,200-$2,800 for a full operator replacement. Call us and we’ll tell you honestly which one makes sense for your property.
That’s the windward face. In El Granada, the prevailing wind comes off the Pacific from the west and southwest, and the salt aerosol hits the hinge post on the ocean side with far more force than the leeward side. The hinge on the protected side still looks new while the exposed one is ready to snap. We replace both hinges at once when we see this pattern, because the leeward one has probably taken years off its life too. Call (877) 610-2993 for an inspection and an honest quote.
Most of the time it’s the post. A gate sags in the hinge post, not in the middle, and that is where we start. Wood posts on El Granada’s older beach cottages rot below grade from constant soil moisture, and the post leans just enough to drop the gate an inch at the latch end. We can usually confirm it without even taking the gate off. If the post is sound and the panel is actually bent, we straighten it or weld in a new rail. Either way, the fix starts with a straight post.
The rollers and the rack are the usual failures. Salt grit works its way into the roller bearings, the gate starts binding, and the rack teeth wear unevenly as the motor fights the drag. We replace the rollers and clean or replace the rack sections as needed, then re-align the drive so the motor isn’t working against itself. Typical slide gate roller and rack repair in El Granada runs $220-$600. We quote it before we start, and the price doesn’t change.
Old Gate, New Parts, Same Driveway
We rebuilt a swing gate off Avenue Alhambra after the windward hinge post had corroded nearly through while the leeward side still looked sound, a classic El Granada pattern. The homeowner’s original Viking operator relied on a loop detector but no safety photocell. We installed new stainless hinges, replaced the post footing, and added a retrofitted photo-eye pair so the operator met current UL 325 entrapment protection. The gate stopped sagging, and the operator stopped faulting every foggy morning. That’s the job: the right parts, welded in place, on the gate you already have.
If your gate is hanging wrong, rusting at the hinge, or stopped operating altogether, call (877) 610-2993. We’ll give you an honest assessment and a written price before any work starts. Hal Gatewood has been at this since 2001, and his name is on every invoice. You can look us up. You can drive to the shop. And you can hold us to the 90-Day Done Right Promise, in writing, on every job we do in El Granada.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.