Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Covina
Gate repair in Covina typically runs between $85 and $900 depending on whether we’re welding a rusted hinge, realigning a sagging leaf, or replacing a dead operator from the 1990s. Most hinge and post repairs are done same-day. If your wrought-iron driveway gate is dragging on the concrete or refusing to close after the Santa Anas, call us at (877) 610-2993 and a live person will answer, day or night.
We work in all three Covina ZIP codes: 91722, 91723, and 91724, from the flat grid of ranch homes near Cypress Street up to the foothill lots off Badillo where RV gates run 10 to 12 feet wide. Covina’s housing stock is mostly post-WWII tract homes built between 1955 and 1975, which means the gates we repair are often older than the people answering the door. That’s the work we came for. We’re scheduled out of our Los Angeles office, but the crews that show up in your Covina driveway know this city’s gates, posts, and soil conditions from years of work right here.
Key Takeaways:
- Same-day hinge and post repair across Covina, with a live person answering calls 24/7
- On-site welding: your gate stays in your driveway, we fix it where it hangs
- Free estimate before any work starts; price is agreed upfront, in writing
- 90-Day Done Right Promise on every job, stamped on the invoice
Why Gatewood Fence & Gate Is Covina’s Preferred Gate Repair Company
Hal Gatewood started this shop in 2001, and his name is on the truck, the invoice, and the door. That’s not marketing. It’s the oldest accountability there is. When we say we’ll be at your Covina home in a certain window, the person who shows up is either Hal or someone from his crew, background-checked and uniformed, not a rotating cast of subcontracted techs.
Covina homeowners call us because we fix gates other companies want to replace. A 1964 double swing gate off Hollenbeck Avenue shouldn’t end up in a scrap pile just because its hinge post rotted at the base. And that’s the thing about this city: the gates are original, the ironwork is thick and worth saving, and the failure is almost always in the post, the hinge, or the weld - not the gate itself. That’s exactly the repair-first Gate Repair approach we build this business on.
We hold a published address and a license number anyone can look up. Our calls are answered by a live person around the clock, not a voicemail or a queue. And every repair in Covina carries the 90-Day Done Right Promise: if it’s not done right, one call brings us back. No runaround.
Our Gate Repair Services in Covina
Electric Gate Repair
Older Covina homes often still run their original Covina Gate Motor & Opener swing-arm units from the 1980s and 90s. When those systems fail, it’s usually the control board, the capacitor, or the travel limit settings - not the motor itself. We service nine major brands including DoorKing, Ghost Controls, and Elite, and we’ll tell you honestly when a $180 board swap beats a $1,400 replacement. Electric gate repair in Covina runs roughly $150 to $650 depending on the fault.
Automatic Gate Repair
Automatic gates in Covina take a beating from the heat. When summer temperatures push past 100°F, metal frames expand, alignment shifts, and operators that were working fine in March suddenly bind or throw error codes. We diagnose in place, adjust travel limits, replace worn rack or chain components, and get the system closing reliably again. Most automatic gate repairs here run $140 to $600.
Hinge & Post Repair
This is the core of what we do in Covina. A gate sags because the post has moved or rusted out at the base, not because the gate got tired. In the 91724 ZIP near the San Jose Hills, we constantly find 10-foot and 12-foot RV gates pulling their original 3-inch posts out of plumb. We pull the old post, pour a new concrete footing, refabricate hinge tabs with our Gate Parts & Welding in Covina, and reset the gate within a quarter-inch. Hinge and post repair typically runs $250 to $850 here, depending on post size and whether welding is needed.
Gate Realignment
Santa Ana wind events funnel hard through the San Gabriel Valley every fall. Unlatched or spring-weakened gates slam against their stops, bending hinge posts and shifting the entire leaf. Realignment means straightening or replacing bent hardware, re-hanging the gate, and resetting the latch so it catches true. In Covina, expect $100 to $350 for a standard single-leaf realignment; double-leaf iron gates with heavy posts run higher.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Covina
We’re certified to work on nine major gate brands, and for Covina customers we stock local parts for the ones we see most often on 1960s and 70s wrought-iron systems: DoorKing, Ghost Controls, Elite, and Viking. That means less waiting on a board shipped from a warehouse, and more same-day fixes. If your operator is obsolete - and plenty of Covina’s original units are - we’ll tell you what can be retrofitted and what genuinely needs replacing. We won’t sell you parts you don’t need.
Common Gate Repair Problems We See in Covina Homes
- Irrigation rust on iron hinges and welds. Hard, mineral-heavy water from the San Gabriel Valley groundwater basin hits gates via lawn sprinkler overspray. By year 15 or 20, hinges are seized, weld joints are flaking, and the gate starts groaning instead of swinging.
- Heat-warped tubular steel frames. Covina’s 100°F+ summers cause steel gate frames to expand and contract daily. Weld points crack, automatic operators lose alignment, and gates that closed fine in the morning bind by late afternoon.
- Santa Ana post lean. When fall winds slam spring-weakened swing gates, the hinge post takes the hit. We see bent posts and stripped rack-and-pinion teeth on slide gates every year right after the first big wind event.
- Failed 1980s-90s automatic openers. The secondary wave of Covina housing brought tubular steel driveway gates and early-generation swing-arm openers. Those units are now at end-of-life, and most can be economically repaired with a new board or limit switch rather than a full replacement.
Pricing for Gate Repair in Covina, CA
Here’s what Covina homeowners can expect to pay. Hinge and post repair: $250 to $850. Gate realignment: $100 to $350. Electric and automatic opener repair: $140 to $650. Weld and rust repair: $150 to $500 depending on how much iron needs to be cut out and rebuilt. Full replacement of a rotted post with new footing: $400 to $900. Every price is quoted and agreed in writing before we start, and the number we give you is the number on the invoice. Standing offers: $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate you’ve received from another company. Seniors and veterans get a permanent 10% discount.
Call (877) 610-2993 for an exact quote. Estimates are free.
Covina’s Older Gates Need a Repairer, Not a Sales Pitch
Walk through any Covina tract built between 1955 and 1975 and you’ll see the same thing: original ornamental wrought-iron driveway and side-yard gates, 50 to 70 years old, hanging on posts set before modern safety requirements and without the footings today’s code demands. These gates leak into the ground from irrigation overspray, bake in one of the hottest pockets of the San Gabriel Valley, and get battered by Santa Ana winds every fall. What happens is predictable: rust at the hinge barrel, a post that’s turned soft at grade, a weld that cracked clean through. Gate repair in Covina is largely a ‘rescue the original ironwork’ market, not a new-installation market. And that suits us fine.
In the 91724 ZIP along the San Jose Hills foothill edge, homes built in the 1960s and 70s often have those wide 10-to-12-foot RV side gates. The original 3-inch posts holding them up were never sized for a leaf that heavy, especially in soil that dries and swells with the seasons. We see those posts failing at a rate that newer Valley cities simply don’t see. Fix the panel without the post and you’ll fix it twice. We start at the post.
We Also Serve Cities Near Covina
Our crews regularly handle Gate Repair calls in Vincent, Charter Oak, Azusa, and Citrus, often on the same trip as Covina jobs. If you’re right at the edge of 91723 or 91724 and not sure whether we cover your street, call and ask. We’ll tell you straight.
Serving Covina, CA - Our Local Coverage Area
We’re based in the Covina area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Covina
Welding a caster wheel under the latch side is a temporary fix that eventually ruins the gate’s geometry and the hinge post. The sag is almost always coming from the post leaning or rusting out at the base. We’ll inspect the post, the footing, and the hinge alignment, then tell you what actually needs to happen. On Covina’s older homes with original 3-inch posts, a new footing is usually the real fix. Call (877) 610-2993 and we’ll come look, free estimate included.
Probably not. What you’re describing is thermal expansion: the metal frame grows in 100°F+ heat, the leaves move, and the operator’s travel limits no longer match the gate’s actual swing. We re-set the limits, adjust the hinges, and in most cases the operator keeps working for years. The operator only needs replacing if the board has failed or the motor windings are burned. We’ll diagnose in place before quoting anything. Call us and we’ll set a time.
We can repair it in most cases. The iron on those 1950s gates is often thicker than anything sold today, and the hinge pins and posts are the weak points, not the gate itself. We weld on-site in your driveway, replace the hinge hardware, treat the rust, and re-hang the gate. Total replacement is only needed when the frame itself is rusted through structurally. If it’s salvageable, we’ll save it. If it’s not, we’ll show you where it failed and why.
Yes, usually. Those wide single-leaf gates were hung on 3-inch posts that are now leaning or rotted below grade. We pull the old post, pour a properly sized concrete footing, refabricate the hinge tabs, and reset the gate square. We’ve done this on ranch homes in the 91724 ZIP many times. The gate itself rarely needs replacing. Call (877) 610-2993 for a free estimate - we’ll tell you exactly what it needs.
Legally, you can repair an existing operator that predates modern UL 325 safety requirements, but we’ll tell you plainly: any automatic gate without photo-eyes or an edge sensor is a crush hazard, especially around kids. We can retrofit photo-eyes and safety edges onto most old DoorKing, Ghost Controls, and Viking units as part of our Gate Access Control - Covina service, and we recommend it on every automatic gate repair we do. If safety retrofits aren’t practical on your particular unit, we’ll say so and give you the cost of the retrofit versus replacement so you can decide with real numbers.
Call Gatewood Fence & Gate for Gate Repair in Covina, CA
If your Covina gate is sagging, binding, rusted, or sitting dead in the driveway after a Santa Ana, call Hal at (877) 610-2993. A live person answers around the clock. We’ll schedule a time, show up when we say we will, and give you a written price before any work starts. The name is on the shop, and the shop is down the road - that’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Covina since 2001.