Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Covina
Gate parts and welding in Covina usually comes down to one of two jobs: rescuing a 60-year-old wrought-iron gate that’s sagging on its original posts, or re-welding a cracked hinge before the whole panel drops. Most of the work we do here is repair-first, because Covina is full of 1955-1975 tract homes with original ornamental ironwork worth saving. We’re on the phone at (877) 610-2993 and we’ll give you a straight answer, a real price, and a time we’ll actually show up. Hal Gatewood’s name is on the shop.
Why Gatewood Fence & Gate Is Covina’s Preferred Gate Parts & Welding Company
We’ve been owner-operated since 2001, and the person who answers the phone is the person who knows gates, not a call center reading a script. Covina homeowners call us after a national outfit told them the gate was “beyond repair” and quoted a full replacement. More than half the time, the gate just needs a new hinge post, a re-weld at the rail, or a set of rollers that actually fit. That’s what our Gate Parts & Welding team does: we fix what’s there before we talk about swapping it.
Every job carries our 90-Day Done Right Promise in writing. If something’s not right, one call brings Hal back. No runaround, no “that’s not covered.” That promise matters in Covina, where a lot of the ironwork is original to the house and can’t be matched off-the-shelf anymore. We also answer our phones 24/7 with a live person, because a gate stuck open at midnight on a property off Cypress Street is not something that can wait until Monday.
We’re licensed and insured, and our crew is background-checked and uniformed. If you’d rather look someone in the eye before hiring, the shop is down the road, and Hal’s name is on every invoice. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in Covina
Here’s what we actually do on Covina gates, week in and week out. These four jobs cover most of the failures we see from the 1955-1975 tract homes to the wider foothill lots in 91724.
Post Replacement
This is the big one in Covina. The original 3-inch posts under those 1960s and 70s wrought-iron gates were fine for a five-foot walk gate, but a lot of Covina lots got 10-12 ft RV side gates hanging on those same posts. Add decades of irrigation overspray from San Gabriel Valley groundwater, and the post rots at the footing while the panel looks fine. We cut out the old post, pour a new footing, weld in a properly sized replacement, and rehang the gate. The panel stays. The sag goes away.
Hinge Replacement
A gate sags in the hinge post, not in the middle. When Covina homeowners call about a gate dragging on the driveway, the top hinge is usually tearing free from the rail, and the post has started leaning. We weld in heavy-duty hinges sized for the panel’s actual weight and span, which is the repair most quote-happy companies skip. On those wide RV gates in the 91724 foothill area, we regularly upsize from the original stamped hinges to barrel hinges that can carry 300-plus pounds.
Rail Repair
Santa Ana wind events funnel through the San Gabriel Valley and slam un-latched gates hard. The failure we see after every big wind season in Covina is a crack at the weld point where the rail meets the hinge post. Sometimes it’s a clean break at the mid-rail from metal fatigue. We grind out the old weld, re-weld the joint with proper penetration, and add a gusset where the design allows. You don’t get this with a bolt-on bracket kit.
Custom Welding
Not every Covina gate parts job is a repair. When a section of scrollwork is missing, or a homeowner wants a custom reinforcement plate, or a pedestrian gate needs to match a 1960s driveway gate, we do the welding on site, in your driveway. We don’t haul the gate to a shop across the county. On-site welding means the fit is exact, the finish matches, and you watch the person doing the work. Hal has been welding gates since 2001, and the person who shows up knows what an original Covina tract-home gate should look like.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Covina
Parts availability matters in Covina, where a lot of automatic openers date to the 1990s and early 2000s. We service and stock parts for the brands most common on Covina lots: FAAC, BFT, Linear, and Viking, among others. If you’ve got an older swing-arm opener that’s grinding or a Viking operator that won’t hold a limit, we can usually source the part same-week and install it correctly the first time. No blaming the brand. No “you should just replace the whole system” unless that’s genuinely true.
Common Gate Parts & Welding Problems We See in Covina Homes
- Hinge post failure on original wrought-iron gates: The 1955-1975 tract homes across 91722, 91723, and 91724 still hold a lot of original ornamental iron. Mineral-heavy irrigation overspray accelerates rust at the footing, so the post fails before the panel shows damage.
- Sagging 10-12 ft RV side gates in 91724: The wider lots near the San Jose Hills foothill edge got era-specific RV gates that now hang heavy on undersized 3-inch posts. Weld cracks at the hinge post and rail junction are the predictable result.
- Santa Ana wind damage every fall: Un-latched or spring-weakened swing gates get slammed by Santa Ana winds funneling through the San Gabriel Valley. Hinge failure and post lean spike every October through December in Covina.
- Seized hinges from mineral-heavy water: Covina’s groundwater is hard, and sprinkler overspray hits side-yard gates constantly. Hinges seize, the gate gets forced, and the top hinge tears from the rail. We replace with sealed-bearing hinges where the original design allows.
Pricing for Gate Parts & Welding in Covina, CA
Here are real numbers for Covina, not “call for a quote” placeholders. Hinge replacement on a standard walk gate typically runs $85-$150 per hinge installed. Post replacement, which includes cutting out the old post, pouring a new footing, and welding a new post, runs $350-$750 depending on post size and gate weight. Rail repair with re-welding runs $150-$400 per rail. Custom welding jobs like gusset plates or scrollwork repair run $95-$250 per hour of welding time. On those wide 91724 RV gates, the job is heavier and the range shifts up accordingly. The price is quoted and agreed before we start. You’ll also get $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote, and remember: estimates are free.
We Also Serve Cities Near Covina
Our Covina crew regularly runs jobs in Vincent, Charter Oak, Azusa, and Citrus. If you’re a few minutes outside Covina proper, the same pricing, the same promise, and the same live person on the phone apply. You don’t need to be in a specific ZIP code to get Hal on a gate that’s giving you trouble.
Serving Covina, CA - Our Local Coverage Area
We’re based in the Covina area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Covina
Because the post is what takes the load, and in Covina the post is what sits in irrigation overspray for 30 years. Wrought-iron panels from the 1955-1975 tract-home era are thick enough to last decades. The 3-inch posts under them were never sized for the weight, and mineral-heavy San Gabriel Valley water rusts the base from the outside in. The panel looks fine, but the top hinge tears out of the post and the whole gate leans. Fix the post and you fix the gate. Call (877) 610-2993 and we’ll tell you if your post is salvageable before anyone starts cutting.
Yes, and that’s most of what we do in that part of Covina. The gate itself is usually solid 1960s or 70s iron. The problem is the original 3-inch post underneath it. We cut out the old post, pour a new footing, weld in a heavier replacement post, and rehang the gate with heavy-duty hinges. The original panel stays in your driveway, matched to your house, with no replacement cost for ironwork you already own.
Yes, and for a lot of Covina’s larger foothill and side-yard lots it’s the cleaner option, especially where running conduit to a gate hundreds of feet from the house is impractical. Covina gets strong sun, and modern solar openers from brands like FAAC and BFT handle single swing gates up to 16 feet and 600 pounds. We’ll size the panel and battery for your actual gate weight and usage, not a one-size-fits-all kit.
Yes, every time. If we’re touching an automated gate in Covina, we check the photocells, the edge sensors if present, and the force settings before we leave. UL 325 entrapment protection isn’t optional, and a gate that reverses when it shouldn’t is a lawsuit waiting to happen. We test it, and if a sensor is missing or failed, we tell you what it costs to fix before you decide. Call (877) 610-2993 if you’re not sure your gate is safe.
Santa Ana winds in Covina slam un-latched swing gates with gusts that funnel through the San Gabriel Valley. A gate that’s left un-latched or has a weak spring becomes a sail: the top hinge tears, the post leans, and the latch frame bends. The fix is threefold: positive latching hardware rated for the panel’s weight, sealed-bearing hinges, and a drop-rod or cane bolt on wide gates so the wind load doesn’t hang entirely on the hinges. Every fall, we see the same failures in the same neighborhoods. It’s predictable, and it’s preventable.
If your gate is sagging, cracked, or dragging in Covina, call (877) 610-2993 now for a free estimate on gate parts and welding. A live person answers, the price is quoted before work starts, and every job carries the 90-Day Done Right Promise in writing. Sidelines don’t fix themselves.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Covina since 2001.