Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Corinth
Gate repair in Corinth, TX usually costs between $185 and $650 depending on whether we’re fixing a hinge post, replacing an operator, or welding a cracked frame. Most jobs in the 76210 ZIP code can be scheduled same-week, and emergency calls get answered by a live person around the clock. If your gate is sagging, binding, or refusing to open after the last storm, call (877) 610-2993 and we’ll get eyes on it fast.
We’ve worked on gates all over Corinth for years now, from the HOA communities off Corinth Parkway to the older ranchettes near Shady Shores and the newer builds along I-35E. The soil here is different than what you find ten minutes south, and it shows up in how gates fail. That’s not a guess, it’s just what the ground does. Hal Gatewood started this company in 2001, and he still answers his own phone.
Key Takeaways
- Corinth’s Blackland Prairie clay heaves 2-3 inches with seasonal moisture, which tilts gate posts and overloads operator motors.
- The most common “broken opener” call in Corinth is actually a post that has racked out of plumb, not a dead motor.
- Gatewood Fence & Gate welds on site, so your gate stays in your driveway instead of getting hauled to a shop.
- Every job is backed by the 90-Day Done Right Promise in writing, plus upfront pricing before any work begins.
- A live person answers 24/7 at (877) 610-2993. No voicemail, no push-button menus.
Why Gatewood Fence & Gate Is Corinth’s Preferred Gate Repair Company
There’s a reason homeowners in Corinth keep our number saved. We’re not a franchise with a rotating cast of subcontractors. The person who shows up to your driveway is either Hal Gatewood himself or someone trained by him, wearing a uniform and carrying the same clear expectation: fix the gate right the first time, or come back and make it right. That’s the Gate Repair approach we’ve used since 2001.
For Corinth specifically, that means understanding the fight your gate has with the ground underneath it. Blackland clay isn’t a minor detail, it’s the whole story for a lot of gate failures here. When spring rain saturates the soil, the clay swells and lifts the post footing. When drought hits in July, the clay shrinks and the post settles back. Over 20 years, that cycle pushes steel tube posts 2 to 3 inches out of plumb, and a post that far out of line puts a permanent bind on the hinge and the operator motor. A company that only swaps motors will be back in your driveway within a year. We fix the post.
Corinth homeowners also appreciate that we publish our address and license number, and we don’t hide behind a dispatch line. Calls come to a live person, any hour, and the estimate we give is the price you pay. That’s the standard Hal built the business on when he set up shop in Denton County, and it’s the same standard his crew holds to on every Corinth job.
Our Gate Repair Services in Corinth
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. When Blackland clay heaves, the post moves and the hinge carries load it was never designed to hold. We dig down to the footing, repack with gravel and proper concrete, reset the post to plumb, and only then touch the gate leaf. If you fix the panel without the post, you’ll fix it twice. That is as true in Lakewood Hills as it is off Post Oak Drive.
Gate Realignment
Even a half-inch of post drift turns a smooth swing gate into one that drags, binds, or won’t latch. In Corinth, the seasonal moisture cycle slowly racks posts over time, and the gate’s arc changes until the latch misses the receiver by a quarter inch. Our realignment work starts with measuring the post, not just adjusting the hinges. In Lakewood Hills, we reset a racked hinge post on a 20-year-old ornamental swing gate that had bound the LiftMaster operator after heavy spring rain. Our crew dug down to the post footing, repacked with gravel and concrete, realigned the hinge post, and restored full travel without replacing the motor. The motor was fine. The post had simply walked away from it.
Electric Gate Repair
Operators for driveway gates around Corinth take a beating from our weather. Ice events force moisture into seals and housings, then summer storms bring lightning that fries control boards. We service Viking, Ghost Controls, DoorKing, and Elite operators, and we carry common parts on the truck so most electric gate repairs in Corinth happen in one visit. Before we condemn a motor, we check the gate’s mechanical path, because a gate that is hard to move destroys an operator from the inside out.
Weld & Rust Repair
Corinth’s iron and steel tube gates, especially the ornamental ones HOA design standards required in so many subdivisions built between 1995 and 2010, are at the age where rust gets ahead of paint. Freeze-thaw cycles crack the factory finish, spring humidity does the rest, and the bottom rail of the gate rusts from the inside out where water collects. We weld on site, in your driveway, so the gate never leaves the property. No shipping it to a fabrication shop, no week-long wait. Hal has welded since 2001, and he can usually rebuild a rusted bottom rail the same day we see it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Storm and Wind Exposure: What Corinth Gates Go Through
Corinth sits on open, gently rolling land that doesn’t block north winds the way denser suburban tree cover does in places like Flower Mound. Solid infill gates, the kind common on the ornamental iron driveway gates set by Corinth HOA covenants, act like sails in a straight-line wind event. A 60 mph gust can put hundreds of pounds of lateral force on a gate leaf, and every bit of that force eventually lands on the hinge post footing. When the ground is saturated from a north Texas spring storm, the footing starts to move, and the gate starts to lean. We see this pattern constantly after severe weather pushes through Denton County.
When the power drops during a storm, many Corinth homeowners have no idea their automatic gate has a manual release. Most slide gate operators and swing gate arms have a release mechanism, often a keyed or pull-chain release that disengages the operator so the gate can be moved by hand. If you leave the operator engaged and the power is out, the gate stays locked, and you can’t get a vehicle in or out until power returns. Every operator we install or service in Corinth gets a walkthrough of the manual release, because a dead gate during an ice event is a real safety problem, not just an inconvenience. If you don’t know where your release is, call us and we’ll show you. That’s a two-minute favor we’re happy to do on any visit.
Trusted Brands We Service in Corinth
We’re certified to service nine major gate brands, and around Corinth we see a lot of Viking, Ghost Controls, DoorKing, and Elite operators on residential driveway gates. Because we work on these brands daily, we keep the common failure parts on our trucks, which means a Corinth repair usually doesn’t wait on a shipped part from a warehouse. Whether the opener is an older lift-master on a swing gate or a newer DoorKing on a slide gate, we can diagnose it on site and usually fix it on the same visit.
Common Gate Repair Problems We See in Corinth Homes
- Clay heave tilting posts out of plumb. The Blackland Prairie soil under most 76210 post footings expands when wet and contracts when dry, shifting posts season after season. A post that’s moved 2 inches out of plumb puts a permanent bind on hinges and stresses the operator motor.
- Freeze-thaw damage cracking paint and opening rust. Ice events force moisture into the factory finish, then spring storms bring weeks of humidity that accelerate corrosion. Ornamental iron gates from the 1990s and 2000s are now at the age where lower rails rust through from the inside.
- Operator motors overloaded by misaligned gates. Many Corinth repair calls start as “motor won’t run,” but the motor is often fine. The gate’s mechanical path has shifted enough that the motor is fighting too much resistance, and eventually the circuit board or drive gear fails.
- HOA community gates with multiple parties involved. Corinth has a large number of HOA-governed subdivisions with shared community gates. Repairs that touch community property often require clarity on who owns what, the HOA or the homeowner. We help homeowners sort through this before any work starts, and we document everything in writing.
Pricing for Gate Repair in Corinth, TX
A hinge post reset in Corinth typically runs $300 to $550, depending on how much concrete has to be broken out and how far the post has moved. Gate realignment usually falls between $150 and $275. Electric gate repair around Corinth varies by part: a photo-eye sensor replacement runs $85 to $140, a control board $250 to $450, and a full operator replacement on a residential swing gate runs $700 to $1,400 including labor. Weld repair on a rusted bottom rail lands around $225 to $400 depending on how much steel needs replacing.
The price we quote is the price you pay, before any work begins. No trip charge inside Denton County, and no fee for us to come out, look at the gate, and tell you exactly what it needs. We also offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. If another company wrote you an estimate and it doesn’t line up, bring it to us. We’ll look it over and tell you straight what’s actually needed and what isn’t.
We Also Serve Cities Near Corinth
Our crews work Corinth and the surrounding north Denton County communities every week. That includes Lake Dallas, Flower Mound, Highland Village, and Denton. If you’re in one of those cities, the same owner-operated service, 90-Day Done Right Promise, and live-answer phone number apply. Call (877) 610-2993 and we’ll get you on the schedule.
Serving Corinth, TX - Our Local Coverage Area
We’re based in the Corinth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Corinth
Your post keeps leaning because it’s set in Blackland Prairie clay that expands dramatically when saturated and contracts when dry. The soil heaves 2 to 3 inches with seasonal moisture swings, pushing the post footing upward and outward. Each cycle moves the post a little farther out of plumb, and the leaning gate eventually binds the hinges and stresses the operator motor. The permanent fix is resetting the post footing with proper gravel drainage and concrete that isolates it from the clay movement. Call (877) 610-2993 and we’ll dig it out and do it right.
Freeze-thaw cycles force moisture into the operator housing seals, into the control board compartment, and into every micro-crack in the paint on your iron gate. When the ice thaws, the moisture stays, corroding terminals and circuit boards from the inside. Then spring storms bring high humidity that accelerates the rust. An operator that’s been through several Corinth winters without a seal inspection is at high risk for a sudden failure during a storm. We check seals on every electric gate repair.
It depends on the HOA’s governing documents and who owns the gate. In most Corinth subdivisions, the community entry gate is HOA common property, which means the HOA is responsible for repairs. But a driveway gate on your own lot is usually your responsibility even if HOA rules dictate its style and materials. We’ve handled both situations across Corinth and we’ll help you figure out who’s responsible before any work starts, including providing documentation for your HOA if needed.
First, find your operator’s manual release. Most swing and slide gate operators have a keyed release or pull-chain mechanism on the side of the operator housing. Pulling it disengages the drive so the gate can be moved by hand. If the gate is a sliding type, the release usually decouples the drive gear from the rack. If you don’t know where your release is, call us before an emergency and we’ll walk you through it. During an actual weather emergency, don’t force a gate that won’t release manually because forcing it can damage the gearbox or the gate frame, and keep clear of the gate’s arc while moving it by hand.
Step back and look at the gate’s vertical lines. If the post is out of plumb, if the gap at the hinge side is uneven, or if the gate leaf visibly sags from the hinge side, the problem is in the post, not the motor. A motor that’s been run against a binding gate for long enough will eventually fail, but replacing the motor without fixing the post means you’ll get a callback within one wet season. Show me the gate closing on its own and I’ll show you where it’s failing. We’ll diagnose the whole system, post to operator, before we recommend anything.
Call Gatewood Fence & Gate for Gate Repair in Corinth
If your gate is sagging, binding, or refusing to open, call (877) 610-2993 and talk to a live person. We’ll schedule a Corinth visit, give you a free estimate with upfront pricing, and do the work with a written 90-Day Done Right Promise behind it. Hal Gatewood’s name is on the shop and on every invoice, and he’s been at this since 2001. You’ll see him again at the hardware store. That’s how repair work is supposed to work.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Corinth since 2001.