Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Corinth
Gate hinge or post trouble in Corinth usually traces back to two things: age and clay. Most gates in ZIP 76210 went in between the mid-1990s and 2010, which puts their hinge pins, weld joints, and operator motors at the end of their service life all at once. And nearly every post footing in Corinth sits in Blackland Prairie clay that swells after spring rain and shrinks during summer drought, slowly shoving posts out of plumb. We fix the gate at your driveway, on site, without hauling it off. If you need Gate Parts & Welding in Corinth, call (877) 610-2993 and you’ll get a live person, not a voicemail.
Key Takeaways:
- Hinge replacement in Corinth typically runs $180-$340 per hinge, depending on gate weight and access.
- Post replacement with a deeper concrete footing averages $450-$900 per post in ZIP 76210.
- We weld on site, so your HOA’s matching ornamental iron gate never leaves your driveway.
- Every job carries the 90-Day Done Right Promise, in writing, from Hal Gatewood himself.
- Call (877) 610-2993 for a free estimate. The price is quoted and agreed before any work starts.
Why Gatewood Fence & Gate Is Corinth’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and he runs the shop the way a tradesman should: his name is on the business, his address is published, and his license number is there for anyone to check. Corinth homeowners tell us the same thing over and over. They called a national outfit first, got one price on the phone, then a different one at the door. That doesn’t happen here. We quote the job, you agree, and we do the work for that number.
Our Gate Parts & Welding team knows Corinth’s neighborhoods because we work in them every week. The Fairways, Forest Hills, Meadowview, and the subdivisions off Corinth Parkway all have HOA-mandated ornamental iron gates from the late-1990s buildout, and we know exactly how those gates fail. A live person answers our phone 24 hours a day, seven days a week, and that person can tell you when we’ll be at your gate. We also offer a free second opinion on any written estimate, no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Our Gate Parts & Welding Services in Corinth
Hinge Replacement
Hinge replacement is the most common gate repair we do in Corinth, and it’s rarely a simple swap. When a gate sags, it sags in the hinge post, not in the middle. On HOA ornamental iron gates from the late-1990s, years of freeze-thaw cycles crack the factory paint at the hinge weld. Moisture gets in, corrosion starts, and the hinge barrel wears oval. We cut out the old hinge, weld in a new one rated for the gate’s weight, and re-hang the leaf so it clears the latch and the driveway. A typical hinge replacement on a Corinth driveway gate runs $180-$340 per hinge.
Post Replacement
Post replacement in Corinth is different from almost anywhere else in Denton County. The Blackland Prairie clay under ZIP 76210 expands and contracts with every wet spring and dry summer, and many original post footings from the 1990s were only poured two feet deep. That’s not enough. The clay heaves, the post tilts, and the gate binds mid-swing. We dig the old footing out, pour a new one below the active clay zone, set the post plumb, and re-weld the hinge brackets. In Corinth, expect to pay $450-$900 per post for a proper replacement. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Rail repair usually follows hinge or post damage. When a post racks out of plumb, it twists the top and bottom rails of the gate leaf, cracking welds at the corners and bowing the pickets. We straighten what can be straightened, replace what’s too far gone, and weld the rail back to the frame so the gate hangs square again. On Corinth’s ornamental iron gates, a rail repair typically runs $150-$400 depending on the extent of the damage and whether we’re rebuilding a corner or splicing a rail section.
Custom Welding
Custom welding covers what parts catalogs can’t. Maybe your HOA requires a specific picket spacing, a matching scroll pattern, or a custom latch bracket that’s no longer made. Maybe the gate opening is a few inches wider than standard and you need a leaf extension. We weld on site in your driveway, so we can match the existing ironwork exactly rather than bolting on an aftermarket piece that looks wrong. Custom welding in Corinth generally starts around $120 for a small bracket or latch repair and runs up from there for full panel modifications. We’ll quote the job before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Corinth
We service and stock parts for the gate operators Corinth homeowners and HOAs actually use. That includes Viking, Ghost Controls, DoorKing, and Elite, among the nine major brands we’re certified to work on. If your community gate runs a DoorKing slide operator and your driveway gate runs a Ghost Controls swing arm, we can handle both on the same visit. We keep common hinge pins, latch hardware, and weld materials on the truck, so most Corinth repairs don’t wait on a parts shipment. If we need something special, we’ll tell you exactly when it lands and when we’ll be back to install it.
Common Gate Parts & Welding Problems We See in Corinth Homes
- Rust at hinge welds after freeze-thaw cycles. North Texas winters force moisture into the cracked paint on late-1990s iron gates, and humid spring storms accelerate the corrosion. The hinge weld is always the first place it shows. We grind out the rust, weld a new hinge, and treat the surrounding metal before repainting.
- Posts racked 2-3 inches out of plumb from clay heave. A gate that binds in spring and sags by August is telling you the post footing is moving. This is the single most common Corinth gate failure we see, and it’s almost always a post problem, not a hinge problem.
- Operator motors burning out from misaligned gates. When a post shifts, the gate leaf drags and the operator has to work harder on every cycle. A new motor won’t fix that. The post has to be re-set first, or you’ll be replacing the motor again inside a year. Show me the gate closing on its own and I’ll show you where it’s failing.
- Shared community gate operators cycling constantly. In gated Corinth neighborhoods, one resident’s misaligned driveway gate can short the loop detector, triggering the street gate to reverse and cycle over and over. That wears out the rack and pinion on slide gates fast. We diagnose the whole loop, not just the operator.
Pricing for Gate Parts & Welding in Corinth, TX
Here’s what Corinth homeowners can expect to pay, based on the work we do every month in ZIP 76210.
- Hinge replacement: $180-$340 per hinge, including welding and re-hanging the gate leaf.
- Post replacement: $450-$900 per post, including a new concrete footing below the active clay zone.
- Rail repair: $150-$400, depending on whether we’re repairing a corner weld or splicing a rail section.
- Custom welding: $120 and up for brackets and latch work; full panel modifications quoted by the job.
- Latch & lock replacement: $95-$250 for most residential driveway gates.
- Gate roller replacement: $80-$220 per roller set for slide gates, including alignment.
The biggest cost variable in Corinth is the post. If the clay has moved a post out of plumb, replacing the hinge alone won’t hold. We’ll show you what’s actually wrong before we quote, and the price we give is the price you pay. No surprises at the door. Call (877) 610-2993 for a free estimate on any gate parts or welding job in Corinth.
HOA Gate Work in Corinth: What You Need to Know
Corinth is a city of HOA-governed subdivisions, and almost every one of them has architectural standards for gates. If you’re repairing a gate on a home built between 1995 and 2010, your HOA likely required that gate at build-out, and it likely has rules about style, height, finish, and even the color of the hardware. Before you weld a new hinge or replace a post, check your architectural approval requirements. We can help with that. Our crew has worked with Corinth HOAs for years, and we know what management companies ask for: matching ironwork, no visible aftermarket parts, and a finished product that looks like the original gate. If your HOA needs documentation, we’ll write up the work for their file.
We recently reset a twisted hinge post on an ornamental iron swing gate in The Fairways at Corinth after HOA management flagged a sag that was dragging the gate leaf across the driveway. The post had racked over two inches out of plumb from clay heave, overloading the LiftMaster operator. Our crew replaced the post footing with a deeper concrete pour, welded a new hinge bracket, and realigned the gate to clear the safety photocell path. The HOA signed off, and the homeowner didn’t have to fight a mismatched repair.
Serving Corinth, TX - Our Local Coverage Area
We’re based in the Corinth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Corinth
Corinth’s Blackland Prairie clay moves with the seasons, expanding after spring rain and contracting during summer drought, and that movement is what pushes gate posts out of plumb. A post replacement here needs a deeper footing than the original 1990s pour, usually extending below the active clay zone so the post stays put year-round. That’s the difference between a fix that lasts and a post that tilts again in twelve months. Call (877) 610-2993 and we’ll look at your post before we quote anything.
Yes. We weld on site, so we match the existing ironwork directly rather than bolting on a generic part from a catalog. If your Corinth HOA requires a specific picket spacing, scroll pattern, or finish, we replicate what’s already on the gate. That’s one reason HOAs in Corinth call us for repair work instead of making homeowners replace an entire gate. Call (877) 610-2993 for a free estimate.
We do. We’ve worked with HOA management companies across Corinth for years, and we understand the approval process, the documentation requirements, and the timeline pressure when a community gate is down. For shared entry gates and perimeter fencing, we can work directly with your management company so you don’t have to be the go-between. Call (877) 610-2993 and we’ll get the coordination started.
In Corinth, the most common reason a new gate motor burns out within a year is that the gate leaf is still binding from a post that’s out of plumb. The operator has to work harder on every cycle, and the motor cooks itself. Replacing the motor without re-setting the post means the same problem comes back. We fix the post first, then the operator. Call (877) 610-2993 and we’ll show you what’s really killing the motor.
Solar gate openers work on Corinth lots that get a few hours of direct sun daily, but on heavily shaded lots in mature subdivisions they often can’t keep the battery charged. We can check your gate’s sun exposure, measure the power draw, and tell you honestly whether solar will hold up or whether a low-voltage AC run is the better call. Call (877) 610-2993 for a straight answer.
We Also Serve Cities Near Corinth
If you’re just outside Corinth, we serve the whole area: Lake Dallas, Flower Mound, Highland Village, and Denton. The same crew, the same 90-Day Done Right Promise, and the same live-person phone answer. If you need Gate Parts & Welding in Corinth or any of those nearby cities, call (877) 610-2993.
Call Now for Gate Parts & Welding in Corinth
Call (877) 610-2993 and a live person will answer, day or night. We’ll schedule your estimate, come out to Corinth, and tell you exactly what the gate needs and what it will cost. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Corinth since 2001.