Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Cooper City
Gate repair in Cooper City usually falls into two buckets: the gate itself has a mechanical problem, or the operator that moves it does. Most calls we get from 33328 involve aging swing gates in HOAs like Rock Creek or Embassy Lakes where the original early-1990s equipment has finally given out. We answer the phone with a live person at any hour, and we will tell you straight what the repair involves before we ever touch the gate. Call (877) 610-2993 and you will get Hal or someone from his crew, not a voicemail.
We are Gate Repair in Cooper City neighbors call when a gate has sagged past the point of realignment or a motor spins but the gate will not move. We have been doing this a long time, and we know the difference between a board that can be swapped and an operator that legally has to be replaced. That distinction saves Cooper City homeowners and HOA boards real money, and it is one of the first things we explain when we show up.
Why Gatewood Fence & Gate Is Cooper City’s Preferred Gate Repair Company
Hal Gatewood started fixing gates in 2001, and his name is still on the shop. That matters in Cooper City because so much of the residential gate work here runs through HOA boards and property managers who want a verifiable contractor, not a random dispatch from a national queue. We will never send a faceless crew. The person who shows up is background-checked, uniformed, and works for Hal directly. He publishes his address and license number, and he will tell you to drive to the shop and look him in the eye if you want to.
Cooper City customers call us because word gets around. A job done right in Rock Creek gets mentioned at a board meeting in Monterra. A gate fixed properly in Embassy Lakes gets noticed by the property manager who also handles a community in Southwest Ranches. We work that way: show up in the window we promised, diagnose honestly, and stand behind every repair with the 90-Day Done Right Promise in writing. If it is not done right, one call brings Hal back. No runaround, no fine print.
Response time to Cooper City depends on the job. Emergency gate failures, especially when a gate is stuck open or a vehicle cannot get through, get priority. Non-emergency realignments and hinge work are typically scheduled within a day or two. Every call starts with a free estimate and an upfront price quoted and agreed before any work starts.
Our Gate Repair Services in Cooper City
Electric Gate Repair
Electric gate repair in Cooper City usually starts with a dead operator or a loop detector that has stopped sensing vehicles. In older communities like Rock Creek, the operators are often first-generation single-phase units from the early 1990s. That is a stubborn fact of this city’s housing stock: these units predate current UL 325 entrapment-protection standards enforced under Broward County code. So a call for a simple motor swap can legally turn into a full operator replacement with a permit. We tell you that before any money changes hands, because HOA boards in Cooper City deserve to budget for it, not get surprised by it.

Automatic Gate Repair
Automatic gate repair covers the whole system: the operator, the control board, safety photocells, remote receivers, and the underground loop detectors. Cooper City’s position near the western Broward boundary, close to the Everglades drainage basin, keeps the water table high. Electrical conduits feeding gate operators flood and corrode more often here than in drier parts of the county. When an automatic gate in Embassy Lakes stops responding to a remote, the problem is rarely the remote itself. It is usually water in a conduit, a shorted loop detector, or a control board that has been corroding for years.

Hinge & Post Repair
A gate sags in the hinge post, not in the middle. In Cooper City, saturated soil around the Everglades drainage basin makes concrete post footings heave and shift over time. We regularly see steel hinge posts in Rock Creek and Monterra that have corroded below grade, which means realigning the panel will not hold. The fix involves cutting out the rotted section, welding in new steel, and resetting the footing level. We weld on site, in your driveway. We do not haul gates off unless there is no other way, and we do not swap a post that can be repaired.

Gate Realignment
Gate realignment in Cooper City often shows up as a swing gate dragging on the driveway or a latch that no longer lines up. Sometimes the hinges have worn, sometimes the post has shifted, and sometimes the gate was never hung square to begin with. We will not sell you a realignment if the real problem is a corroded post, because Fix the panel without the post and you will fix it twice. That is not good for you, and sloppy work genuinely irritates Hal. Expect an honest read on whether a realignment is worth doing.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cooper City
We are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Cooper City specifically, we still run into a lot of older Linear and Viking operators on the first-generation gates around Rock Creek and Embassy Lakes. We also service DoorKing units that property managers in Monterra prefer for their longevity. Because we work this area constantly, we keep common parts in stock, which means a board swap or a set of safety photocells usually happens same-day rather than “when the part ships.”
Common Gate Repair Problems We See in Cooper City Homes
- Early-1990s operators failing entrapment-protection inspection. Units installed before current UL 325 standards cannot legally be repaired in many cases once they fail. Broward County requires compliance, which means full operator replacement and a permit pull, not a board swap. HOA boards in Cooper City hear this from us before the bill arrives.
- Underground loop detectors shorting out from high water table flooding. Conduit runs near the Everglades drainage basin fill with water during Cooper City’s wet season. When the loop detector fails, the gate stops opening for cars, and the fix means digging up and re-pulling the loop, not just resetting the board.
- Hinge posts corroding and heaving in saturated soil. Steel below grade plus standing groundwater equals rust. Once the post shifts, the gate drags, the opener strains, and a realignment will not hold. Cooper City’s soil makes this the root cause of many “sagging gate” calls that other companies will try to band-aid with hinge shims.
- Wooden gate panels warping from year-round humidity. The August-October hurricane window and high ambient humidity cause wood gates in Cooper City to delaminate and warp faster than in drier climates. Sometimes the frame can be reinforced; sometimes the panel should be replaced. We will tell you which is cheaper over five years.
Pricing for Gate Repair in Cooper City, FL
Gate repair pricing in Cooper City runs in predictable bands. A hinge or latch repair typically costs $150-$350 depending on how much welding is required. Gate realignment runs $200-$450. A control board replacement usually lands between $350 and $700. Loop detector replacement, including trenching in a new loop, runs $500-$900. A full operator replacement on an older single-phase unit, including UL 325 compliance and a Broward County permit, starts around $1,500 and can reach $2,800 depending on the gate size and access. The price gets quoted and agreed before any work starts, and we honor it. We offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Cooper City
Gatewood Fence & Gate works throughout the western Broward corridor. While this page is for Cooper City, we also regularly serve Pine Island Ridge, Davie, Southwest Ranches, and Pembroke Pines. If your gate is in a neighboring community and you want a straight answer, call us, or read more about our Gate Repair team’s full service area.
Serving Cooper City, FL - Our Local Coverage Area
We’re based in the Cooper City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Cooper City
A simple motor repair in Cooper City requires a permit and full operator replacement when the existing unit predates current UL 325 entrapment-protection standards under Broward County code. Many gates in Rock Creek and Embassy Lakes still run original single-phase operators from the early 1990s that cannot legally be repaired once they fail. The county will not approve a board swap on a non-compliant operator. We verify compliance before any work starts so HOA boards are not blindsided. Call (877) 610-2993 if you want us to check your community’s operator.
High water table and Everglades drainage flood the underground conduit runs that feed gate loop detectors in Rock Creek and Embassy Lakes, causing shorts, corrosion, and false or failed vehicle detection. The water sits in the conduit because Cooper City’s saturated soil does not drain quickly. The fix is typically a new loop wire pulled through a properly sealed conduit, not a control board reset. We diagnose this before digging.
Sagging swing gates in Monterra usually need hinge post work, not just panel realignment, because the saturated soil near the Everglades drainage basin corrodes and shifts steel posts below grade. If the post has moved, realigning the panel will not hold. We will weld a new section in and reset the footing if that is what the job calls for. If the post is still solid, a realignment and hinge rebuild may be enough.
We service all nine major brands for older Cooper City HOAs: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Rock Creek and Embassy Lakes specifically, we see the most Linear and Viking units from the early 1990s, plus DoorKing on newer board-managed installations in Monterra. We keep common parts in stock for local turnaround.
We coordinate with HOA boards and property management companies in Cooper City by providing written scope-of-work documents, permit documentation, and pricing before any board vote. Cooper City’s master-planned communities run on vendor lists, aesthetic standards, and board sign-off, and we are used to working that way. Hal will speak directly with the board or property manager, and every quote is in writing and honored.
If your gate is down in Cooper City, call (877) 610-2993 for a free estimate. A live person answers, we will tell you what we think is wrong, and we will give you a price before any work starts.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Cooper City since 2001.





Before
After
Before
After
Before
After