Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Commerce City
Gate repair in Commerce City usually costs between $185 and $425 depending on what’s actually wrong, and most jobs are finished the same day we start them. If you’re off Highway 2 near the Derby area, east of the refinery, or out in Reunion, we know the streets and the soil conditions that eat gate posts for breakfast. Hal Gatewood has been fixing gates since 2001, and he’ll be the one on the phone when you call (877) 610-2993.
Here’s the thing about gates in Commerce City. They don’t fail the same way gates fail in Denver or Aurora. The refinery corridor along the South Platte puts airborne sulfur compounds into the air, and that settles on your gate steel. Add the expansive clay soil that heaves with every freeze-thaw cycle, plus the straight-line Front Range winds that hammer the northern subdivisions, and you’ve got a repair job that needs someone who’s seen it before. We have, and we fix it where it stands.
Why Gatewood Fence & Gate Is Commerce City’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is. When you call for Gate Repair, you’re not getting routed to a queue in another state. Hal answers. If he’s under a gate, you’ll get a call back from his own cell phone, usually within the hour.
We’ve worked on enough gates in Commerce City to know which neighborhoods fight which problems. Southern ZIP 80037, with those 1950s and 1960s ranch homes, the hinge posts were set in footings too shallow for today’s soil movement. Northern 80022, where Reunion and the master-planned communities sit, the ornamental iron gates catch every gust that rolls off the high plains. We stock the hardware for both, so we’re not running back and forth to a supplier while your gate hangs open.
Every job carries the 90-Day Done Right Promise, in writing. If it’s not done right, we come back and make it right. No runaround, no fine print. That’s how we’ve kept Commerce City homeowners calling us back for over two decades.
Our Gate Repair Services in Commerce City
Hinge & Post Repair
In Commerce City, the hinge post is where gates go to die. The clay soil under the southern neighborhoods expands when it’s wet and contracts when it freezes, and over 50 or 60 years that works a post loose faster than any gate opener can compensate for. We dig out the old footing, reset the post in concrete, and reinforce it so the next freeze-thaw cycle doesn’t undo the work. On older ranch-style gates in ZIP 80037, we often find the original footings were only 18 inches deep. That’s not enough for this soil, and it’s why so many gates drag on the ground by March.
Hinge and post repair in Commerce City typically runs $220 to $380 per post, depending on whether we’re resetting in place or pouring a new footing.
Weld & Rust Repair
Rust hits gates in Commerce City faster than almost anywhere else on the Front Range. Homes west of Highway 85 and south of 72nd Avenue sit close enough to the industrial corridor that airborne sulfur compounds settle on steel frames and eat through paint within two or three years. We weld on site, in your driveway, so the gate never leaves your property. If the rust has thinned the steel, we cut out the bad section and weld in fresh plate, then coat it with corrosion-resistant primer and paint that holds up to what’s in the air here.
Weld and rust repair in Commerce City generally runs $150 to $400, depending on how much steel needs replacing. We quote the full price before the welder ever fires up.
Gate Realignment
High plains wind is a fact of life in Commerce City, and it pushes gates out of square constantly. The exposed subdivisions north of E-470 get hit hardest. A gate that’s even a quarter-inch out of alignment will bind on the track, strain the operator, and chew through rollers in a single season. We realign the gate, adjust the track, and reset the opener’s travel limits so it runs clean. On the older slide gates in the Derby area off East 64th Avenue, we also check the rack and pinion for wear, because misalignment and worn gear teeth feed each other.
Gate realignment in Commerce City typically runs $145 to $260, including operator adjustment.
Electric Gate Repair
Most electric gate failures in Commerce City aren’t motor failures. They’re control board failures, limit switch failures, or wiring that’s corroded inside the conduit. We service LiftMaster, FAAC, BFT, Linear, Viking, and the other major brands, and we keep common control boards in the truck. On 1990s-era operators in the older neighborhoods, the issue is usually an obsolete board that hasn’t been made since 2005. Sometimes we can retrofit a replacement; sometimes the honest answer is that a new operator costs less than chasing parts for a 25-year-old board. We’ll tell you which one applies to your gate before you spend a dollar.
Electric gate repair in Commerce City runs $195 to $450 for most board, limit switch, and wiring repairs. Full operator replacement is a different scope, and we’ll quote it after we see what you have.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Commerce City
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Commerce City customers, that matters because we stock common parts locally, which means we’re not waiting on a distributor in Texas while your gate sits open all week. FAAC and BFT operators show up in a lot of the newer Reunion and northern subdivision gates. Older Commerce City homes lean toward Linear and LiftMaster units from the 1990s. Either way, we’ve got the parts and the wiring diagrams in the truck.
Common Gate Repair Problems We See in Commerce City Homes
- Premature rust on west-facing steel frames. The southern and central neighborhoods near the refinery corridor see pitting and rust scale on gates within two to three years of installation. It’s not the paint’s fault. It’s airborne sulfur compounds. We spec hot-dip galvanized hardware and powder-coat touch-ups on every service call here.
- Hinge posts worked loose in expansive clay soil. The 1950s through 1970s ranch homes in southern Commerce City were built with shallow post footings that frost heave pushes around every winter. A post that shifts half an inch throws the entire gate out of level.
- Misaligned operators from downslope winds. The open high plains northeast of Denver give Commerce City no topographic protection. Strong winds knock automatic gate openers out of alignment, warp lightweight aluminum panels, and stress hinges on the exposed northern subdivisions in ZIP 80022.
- Obsolete control boards on 1990s operators. Gates hung before modern safety requirements existed often carry operators with boards that are no longer manufactured. We’ll tell you honestly when a retrofit makes sense and when a new operator is the cheaper answer over the next five years.
Pricing for Gate Repair in Commerce City, CO
Here are the real numbers for Commerce City’s market, not a national average. A typical hinge post reset runs $220 to $380. Weld and rust work lands between $150 and $400 depending on how much steel is compromised. Gate realignment costs $145 to $260. Electric gate repair, including control boards, limit switches, and wiring, runs $195 to $450. Full gate operator replacement starts around $700 and goes up based on the brand and gate weight.
We quote the full price before any work starts. That price is what you pay. No trip charge inside the county. $40 off any repair over $200. Seniors and veterans get 10% off permanently. And if you have a written estimate from another company, bring it to us for a free second opinion. Sometimes we find repairs that don’t need doing; Hal gets genuinely annoyed when he finds sloppy work somebody left behind.
We Also Serve Cities Near Commerce City
Our crews work throughout Commerce City and the surrounding communities, including Derby, Federal Heights, Sherrelwood, and Welby. If you’re just over the line and wondering whether we’ll come out, call us. If you’re inside Commerce City proper, you can find more about how we serve the area on our Commerce City page.
Serving Commerce City, CO - Our Local Coverage Area
We’re based in the Commerce City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Commerce City
Commerce City sits next to the Suncor Energy refinery and the industrial corridor along the South Platte River, which releases airborne sulfur compounds and particulates that accelerate corrosion on steel gates two to three times faster than in neighboring Denver or Aurora. Gates on the west and south sides of homes closest to the refinery corridor routinely show deep pitting and rust scale within two or three years of installation. We address this by spec’ing hot-dip galvanized hardware and applying corrosion-resistant coatings on every Commerce City service call, whether or not visible rust has appeared yet. Call (877) 610-2993 and we’ll assess what your gate needs.
In most Commerce City ranch homes from the 1950s through 1970s, the sag comes from a hinge post that has worked loose in the expansive clay soil after decades of freeze-thaw cycling, not from a bad gate frame. We can reset the post footing in concrete and realign the gate for $220 to $380, which is usually a fraction of full replacement cost. The panel itself is often still structurally sound. We’ll tell you honestly after we look at it whether repair or replacement is the smarter long-term money. Call (877) 610-2993 for a straight answer and a free estimate.
Most 1990s-era gate operators in Commerce City predate the UL 325 safety standards that now require monitored entrapment protection like photo eyes, safety edges, and auto-reverse functions. If your operator is 20-plus years old, it almost certainly does not meet current requirements. We can retrofit some older units with compliant safety devices. On others, especially where the control board is obsolete, a new operator is the cheaper and safer answer. We’ll walk you through exactly what your gate has and what it needs. Call (877) 610-2993 and we’ll give it to you straight.
The older neighborhoods in southern and central Commerce City, including the Derby area off East 64th Avenue and much of ZIP 80037, have ranch homes from the 1950s through 1970s with chain-link or tubular steel slide gates that need hinge post and rust work more than anything. The master-planned subdivisions in northern ZIP 80022, like Reunion, have ornamental iron driveway gates and HOA-managed community entry gates that demand more specialized attention to operator alignment, access control, and wind-related panel stress. We adjust our repair approach based on where in Commerce City you live. Call (877) 610-2993 and we’ll come look.
We recommend a seasonal adjustment twice a year for gates in Commerce City, once in early spring after the freeze-thaw cycle has had its run, and once in early fall before the downslope winds pick up. The combination of expansive clay soil moving your posts and Front Range winds pushing your gate out of square means operators drift out of alignment faster here than in more sheltered communities. A $145 to $260 realignment once or twice a year is cheaper than replacing a burned-out operator every three years. Call (877) 610-2993 to schedule yours.
When you call (877) 610-2993, a live person answers. Not a voicemail, not a chatbot. That person is usually Hal Gatewood himself. Tell him what your gate is doing, and he’ll tell you what it’ll take to fix it. Free estimate, written price before work starts. If you’re in Commerce City, we’ll come to you, and the name on the shop is the name that stands behind the job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Commerce City since 2001.