Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Commerce City
Gate Parts & Welding in Commerce City typically costs between $225 and $1,800 depending on whether you need a hinge welded back into square, a post replaced entirely, or a custom reinforcement plate burned onto a rust-thinned frame. Most hinge and roller repairs we do in Commerce City run $225-$475, post replacement with on-site welding lands between $500 and $1,100, and full custom fabrication starts around $400. We answer the phone at (877) 610-2993 with a live person, and we will give you a written price before any cutting or welding starts.
If your gate is sagging, scraping, jumping track, or has a hinge that’s starting to tear loose from the post, you want someone who knows how Commerce City’s industrial air eats steel faster than it does three miles away. That matters more than the weld itself. We’re Gate Parts & Welding specialists who work on-site in your driveway, not behind a shop counter. Hal Gatewood has been at this since 2001, and he still handles jobs personally across Commerce City.
Why Gatewood Fence & Gate Is Commerce City’s Preferred Gate Parts & Welding Company
Most gate companies in the Denver metro will look at a rust-thinned hinge post in Commerce City and tell you the gate’s shot. Swap the whole thing. We don’t work that way. Hal’s crew welds in the driveway, changes what actually failed, and leaves the rest alone. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
We’ve been fixing gates in the older part of Commerce City near Derby long enough to know which posts rot from the inside out and which neighborhoods need galvanized hardware on every single call. Dispatch and scheduling run through our Denver office, but the person who shows up in Commerce City knows the area and drives here regularly. We’re not a national outfit with a robot on the phone. Call at 2 a.m. and a live person picks up.
Every job gets the 90-Day Done Right Promise in writing. Not “up to” 90 days. Not “in most cases.” If it isn’t done right, one call brings Hal back. That’s it.
Our Gate Parts & Welding Services in Commerce City
Hinge Replacement in Commerce City
Hinge replacement in Commerce City runs $225-$475 per hinge depending on whether we’re welding a barrel hinge back onto a tube steel frame or switching you to a heavier hinge that can actually handle Front Range wind. In the neighborhoods closest to the refinery corridor along the South Platte, we see hinge bearings widened by rust jacking. That’s the sulfur compounds at work. You can’t just grease it and walk away. We cut the old hinge off, grind the post clean, and weld the new one in square.
Post Replacement With On-Site Welding
Post replacement in Commerce City lands between $500 and $1,100 including the new post, concrete, and on-site welding. The older ranch homes in the 80022 and southern 80022 pockets often have tube steel slide gates on posts set in shallow footings. Freeze-thaw cycles crack those footings over time, and then the track shifts and rollers derail. We dig the old footing, set the new post in concrete, and weld the gate back into alignment the same day. Your gate stays in your driveway. We don’t haul it off for a week.
Rail Repair and Straightening
When a slide gate rail bows or cracks, the gate won’t seat right, and then the opener’s limit switches start lying to it. We straighten or replace rails on site for $300-$700. Downslope winds off the high plains stress top rails on west-facing gates in Commerce City, and we’ve pulled enough bowed aluminum panels off Reunion driveway gates to know where they fail first. Fix the panel without checking the post and you’ll fix it twice.
Custom Welding for Gates in Commerce City
Custom welding starts around $400 for a straightforward reinforcement job. If you need a plate burned onto a rust-thinned frame, a new gate fabricated to match an existing ornamental iron pattern, or a hinge mount rebuilt after years of fatigue, we handle it in the driveway. In Commerce City, we routinely spec hot-dip galvanized hardware or powder-coat touch-ups on every custom weld. The air here doesn’t forgive bare steel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Commerce City
We’re certified to work on nine major gate brands, and around Commerce City we see a lot of Viking and Ghost Controls openers on the newer Reunion builds, plus DoorKing and Elite on the older industrial and ranch-style properties. If you’ve got a Mighty Mule opener that’s been fighting the wind and losing, we can help with that too. We keep common Viking and Ghost Controls parts on the trucks that serve Commerce City, which means less waiting on a shipped part when your gate won’t close.
Common Gate Parts & Welding Problems We See in Commerce City Homes
We see five failure patterns over and over in Commerce City, and most of them trace back to two things: the refinery air and the tight lots.
- Rust jacking on hinge posts: Sulfur compounds from the Suncor corridor accelerate pitting on west- and south-facing steel frames. Hinges widen, gates sag, and the rack and pinion teeth strip within two to three years. We preempt this with galvanized hardware at every service call.
- Wind-warped panels throwing opener limits off: Strong downslope winds slam west-facing gates in Reunion and along Parkway Drive, bending lightweight aluminum panels and knocking the operator’s limit switches out of alignment. Symptom: the gate reverses mid-cycle or fails to latch.
- Freeze-thaw cracking old post footings: The 1950s-1970s tube steel slide gates around the older neighborhoods near Derby sit on shallow concrete that heaves every winter. Rollers derail, tracks drift, and the gate jams halfway open while a work van is trying to get out.
- Stripped rack and pinion teeth on slide gates: When the gate sags from rust-thinned hinges, the rack teeth don’t mesh right with the pinion. You hear a grinding noise, then the opener starts slipping. We replace the rack and fix the sag, not just the symptom.
Pricing for Gate Parts & Welding in Commerce City, CO
| Service | Typical Range in Commerce City |
|---|---|
| Hinge replacement (per hinge, welded on site) | $225-$475 |
| Gate roller replacement | $180-$340 |
| Rail repair or straightening | $300-$700 |
| Post replacement with welding | $500-$1,100 |
| Custom welding (reinforcement, fabrication) | $400-$1,800 |
What drives cost on gate welding in Commerce City is mostly the condition of the metal you’re welding onto. A hinge replacement on clean, solid tube steel is quick. A hinge replacement on a post that’s rust-thinned from three years of refinery air takes longer because we have to cut back to good metal first. You’ll get a written price before we start. No trip charge inside the county. $40 off any repair over $200. Permanent 10% discount for seniors and veterans. And if you have a written estimate from another company, bring it in and we’ll give you a free second opinion.
We Also Serve Cities Near Commerce City
Gatewood Fence & Gate serves Gate Parts & Welding in Commerce City and the surrounding communities, including Derby, Federal Heights, Sherrelwood, and Welby. If you’re a few minutes up Highway 85 or just across the South Platte, we’ll drive to you. Same live person on the phone, same written promise on the job.
Serving Commerce City, CO - Our Local Coverage Area
We’re based in the Commerce City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Commerce City
Commerce City sits adjacent to the Suncor Energy oil refinery and a dense industrial corridor along the South Platte River. The air carries sulfur compounds and airborne particulates that settle on metal and accelerate corrosion. We see deep pitting and rust scale on west- and south-facing steel gate frames within two to three years of installation, whereas the same hardware in Denver or Aurora might go five years before showing comparable wear. That’s why we spec hot-dip galvanized hardware or powder-coat touch-ups on every Commerce City service call, not just when visible rust appears. Call (877) 610-2993 and we’ll tell you what you’re looking at.
Yes. We’ve done it more times than we can count in Reunion’s tight setbacks, where a gate blocks the only shared driveway access. We stage the work so vehicle and pedestrian access keeps moving while we pull the old footing, set a new post, and weld the hinge back in square. It takes longer than an open-lot job, but it’s doable when the crew plans the sequencing right. We did one on a community entry gate where a swing gate wouldn’t have fit anyway, working in a 4-foot setback between a block wall and a LiftMaster operator. Cars kept rolling through while we worked.
UL 325 sets the safety standards for automatic gates in the U.S., including requirements for photoelectric sensors, reversing edges, and force limits that stop the gate if it hits a person or object. When we weld on a gate in Commerce City, we check that the safety photocells and reversing edges are still functional and properly aligned. If a wind-warped panel or sagging hinge has thrown the safety sensors out of alignment, your gate is no longer compliant and it’s dangerous. We fix that as part of the repair. Call (877) 610-2993 to have your gate checked.
We start by finding why it sags. In the older neighborhoods near the refinery, it’s usually rust jacking on the hinge post bearings or a cracked footing from freeze-thaw cycling. You can’t just force the rollers back onto the track and call it done. We cut out the rust-thinned hinge mounts, weld in new ones, reset the post if the footing is cracked, and then realign the rollers and track. The rack and pinion teeth get inspected too, because a sagging gate strips them for a living. Call (877) 610-2993 and we’ll take a look.
Yes, with the right heat control and a plan for the finish. We can burn a reinforcement plate onto the back side of the gate frame without scorching the ornamental detail on the front, but you’ll need a powder-coat touch-up on the welded area afterward. We’ll tell you that before we start. The hot-dip galvanized approach works best for gates that face west and take the full brunt of Commerce City’s wind and refinery air. For an exact quote, call (877) 610-2993 and describe what you’ve got.
Call Gatewood Fence & Gate for Gate Parts & Welding in Commerce City
If your gate is sagging, scraping, or stuck halfway open in Commerce City, call (877) 610-2993. You’ll get a live person on the line, a straight answer, and a written price before any work starts. Hal Gatewood has been fixing gates since 2001, and he’s not about to swap a gate that can be welded back to square. 90-Day Done Right Promise in writing. Free estimates. No trip charge inside Adams County. Show me the gate closing on its own and I’ll show you where it’s failing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Commerce City since 2001.