Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Cibolo
Gate repair in Cibolo, TX typically runs $145-$380 for most hinge, post, and opener work, and because crews stage from the San Antonio metro office, we can usually have someone at your house the same day you call. Most Cibolo gates fail for reasons that have nothing to do with the gate itself, and everything to do with the clay underneath it. We’ve been owner-operated since 2001, and Hal Gatewood still answers the phone himself. Call (877) 610-2993 and you’ll get a live person, not a voicemail tree.
Why Gatewood Fence & Gate Is Cibolo’s Preferred Gate Repair Company
When a gate sags in Cibolo, it’s almost never the panel that failed. It’s the post underneath, slowly tilting as the Blackland Prairie clay swells and shrinks beneath it. That’s the first thing we check, because we’ve seen it hundreds of times in the subdivisions along FM 1103 and FM 78. Most gate companies show up, swap a hinge or a motor, and leave. The same gate fails again in eight months because nobody fixed the foundation. Hal won’t do that. The name is on the shop, and the shop is down the road in San Antonio, serving Cibolo directly. That’s the oldest accountability there is. If it’s not done right, the 90-Day Done Right Promise means one call brings him back, no runaround. In writing, on every invoice.
Our Cibolo customers don’t need a national chain sending a stranger in a rented van. They need someone who knows what a 2007-era builder-grade operator sounds like when the low-voltage wiring has baked in five summers of Texas heat. Hal’s crew is background-checked and uniformed. You’ll see the same faces if you need us again next year. And you probably will, because Cibolo’s soil doesn’t quit moving. When it does, we’re familiar with every HOA subdivision, and we know which gates are original to the build and which were retrofitted afterward.
Our Gate Repair Services in Cibolo
Electric Gate Repair
When your opener in a Cibolo subdivision starts erroring out on a 7-year-old gate, the motor is usually the last thing we replace. We check the post alignment first, then the wiring, then the operator. The Blackland clay under your slabs and posts moves more in a single rain-drought cycle than most soils move in a decade. That movement strains every component on an electric gate, from the arm to the control board. If your gate worked fine for years and suddenly won’t open, the odds are good the post shifted a couple inches and the opener is fighting it. We fix the cause, not just the symptom. Our Gate Repair team handles LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and we carry the parts to rebuild an opener instead of selling you a whole new unit by default.
Automatic Gate Repair
Automatic gates in Cibolo have a predictable lifespan problem. The operators installed during the 2005-2015 building surge are hitting their first major rebuild cycle all at once. We’re seeing the same pattern across the FM 1103 corridor: motors that overheat because a post has tilted 2-4 inches, arms that bind against their rack because the gate no longer swings true, and safety photocells that trip intermittently because the beam falls out of alignment. We repair the mechanical alignment before we touch electronics. A new Cibolo Gate Motor & Opener bolted onto a twisted frame will fail within a year. There’s a reason we start every automatic gate service call in Cibolo with a level and a tape measure, not a multimeter.
Hinge & Post Repair
Hinge and post repair is the single most common job we do in Cibolo, and it’s the one most companies skip. A gate sags in the hinge post, not in the middle, and that’s where we start. The Vertisol clay beneath your gate post expands when it rains and contracts during drought, which tilts the post incrementally until the gate drags on the concrete or the latch won’t catch. We reset the post footing, weld new hinge plates if needed, and realign the gate so it swings like it did the day it was installed. This isn’t a cosmetic fix. It’s the structural repair that makes every other repair stick. Skip it, and you’ll fix the same gate twice. Better to do it once.
Gate Realignment
Gate realignment in Cibolo usually means correcting several degrees of drift from clay heave. A gate that’s only 2 inches out of plumb at the top of the post can put a constant lateral load on the hinges, the latch, and the operator gearbox. We see this constantly in the newer subdivisions where ornamental iron gates were set directly into expansive clay without deep concrete footings. We reset, shim, weld, and adjust until the gate closes on its own weight and the Gate Access Control - Cibolo operator isn’t fighting it. If your gate is dragging, clicking, or the latch has to be lifted into place, realignment is probably the fix. We also bed the post correctly this time, because band-aids don’t hold in Cibolo soil.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cibolo
We’re certified on nine major gate brands, and in Cibolo we most often see LiftMaster, FAAC, and DoorKing on the driveways of the 2000s-era subdivisions, plus a growing number of Viking and Ghost Controls units going in on new builds. When we load the truck for a Cibolo call, we carry the common boards, arms, sensors, and gear sets for these brands so we’re not driving back across the county mid-repair. We service them all, but we’re not brand-precious. If a Linear operator is the right fix for your gate, we’ll tell you. If the old DoorKing just needs a gear and a good alignment, that’s what we’ll sell you.
Common Gate Repair Problems We See in Cibolo Homes
- Clay heave tilting hinge posts 2-4 inches out of plumb. The Blackland Prairie Vertisol under Cibolo shrinks during drought and swells after rain, and that movement lifts and tilts gate posts enough to bind swing gates and overload opener motors. This is the root cause behind most 7-12-year-old automated gate failures we repair in the city.
- Builder-grade operators on 2005-2015 homes with no proper conduit runs. A lot of Cibolo’s housing stock went up in a twenty-year rush, and the low-voltage wiring for gate operators was often run bare or in shallow trenches. Fifteen summers of UV and triple-digit heat degrade the insulation until open and close commands fail intermittently.
- Manual ornamental gates retrofitted with automation, no post reinforcement. When a homeowner adds an opener to a gate that was installed manual during the build, the existing post often wasn’t sized or footed for torsional load. We see these sag and bind within the first year, and the correction usually involves a new footing, not just a new arm.
- Safety photocells misaligned from post movement. When a post shifts even an inch, the photo eye that should stop the gate from closing on a car or a child no longer lines up. The gate looks fine, but it’s no longer UL 325 compliant. We realign and test every set as part of any repair.
Pricing for Gate Repair in Cibolo, TX
Here are the line-item ranges we quote over the phone for Cibolo work, and the price we quote is the price you pay before any work starts:
- Hinge or latch replacement: $145-$260
- Post realignment or reset without new footing: $220-$420
- Post replacement with new concrete footing: $380-$750
- Opener motor or gear replacement: $260-$520
- Full gate realignment and structural reinforcement: $300-$600
- Low-voltage wiring replacement: $180-$410, depending on the run
Several things affect the final number: whether the post needs a new footing or just a reset, how long the conduit run is, and whether we’re replacing a gear set or an entire operator. You’ll get a firm price before we touch a tool, and every repair over $200 is $40 off right now, plus no trip charge inside the county. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for an exact quote, estimates are free, and we’ll put the number in writing.
One more thing worth saying plainly. We don’t sell replacement gates as a first option. If your gate can be repaired, we repair it. Hal has been welding on site since 2001, and he’d rather rebuild a hinge with our Gate Parts & Welding in Cibolo than sell you a panel you don’t need. That’s the repair-first philosophy, and it’s why Cibolo homeowners call us back when the next thing breaks.
We Also Serve Cities Near Cibolo
If you’re in Gate Repair in Cibolo territory, you’re covered. We also run calls to Schertz, Selma, Universal City, and Converse, and because we stage from San Antonio, we can usually hit any of these cities the same day. Same crew, same 90-Day Done Right Promise, same phone number that a live person answers.
Serving Cibolo, TX - Our Local Coverage Area
We’re based in the Cibolo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Cibolo
Cibolo sits on Blackland Prairie Vertisol clay, a soil type that expands dramatically when wet and shrinks just as dramatically during drought. That shrink-swell cycle lifts and tilts gate posts far more than the limestone or sandy loam soils you find in many neighboring cities. In most Cibolo subdivisions, the posts were also set without deep, reinforced footings during the rapid building surge of the 2000s, which makes them even more vulnerable. A post that has moved 2-4 inches is not a rare find here. It’s the default starting condition. Call (877) 610-2993 and we’ll tell you over the phone what you’re likely dealing with.
Usually not in Cibolo. The opener is working against a gate whose post has shifted out of alignment from clay movement, and the extra resistance is burning up the drive gear or tripping the thermal overload. We replace the gear, realign the gate, and reset the post if needed. The motor itself often has years left. That’s the difference between a company that replaces parts and a company that repairs gates. Get a free estimate at (877) 610-2993.
Absolutely, and we do it regularly in Cibolo’s HOA subdivisions. The right way is to evaluate the existing post and footing first. Many manual gates from the 2000s building surge were installed on posts never meant to carry an operator’s torque. We can reinforce the post, run proper conduit for low-voltage wiring, and install a new Linear or Ghost Controls operator that will last. Done wrong, you’ll have sag and binding within a year. Done right, you’ll get a decade. Call (877) 610-2993 for a free in-person assessment.
Most likely, the original install did not include proper conduit, so the wire has been sitting in Texas sun and triple-digit heat for years. UV exposure breaks down the insulation until it cracks, and moisture gets in, causing intermittent shorts and failures. We replace the run with UV-rated, conduit-protected wiring and handle the trenching. It’s a common fix in Cibolo, where a lot of 2005-2015 homes went in during a construction boom and the original gate work wasn’t always built for twenty summers of direct sun. Call (877) 610-2993 and we’ll scope the run.
In Cibolo, that’s usually a wiring or post-movement problem, not a keypad failure. The keypad sends its signal to the control board, but if the low-voltage wiring has degraded or a post has shifted enough to misalign the safety sensors, the board may refuse the command. We trace the whole circuit, from keypad to board to sensors, and fix what’s actually failing. Often the keypad was fine all along. Call (877) 610-2993 and we’ll walk you through what to check first, then send someone out if it needs eyes on it.
Call Gatewood Fence & Gate for Gate Repair in Cibolo, TX
If your gate is dragging, struggling, or won’t respond, call (877) 610-2993. A live person answers around the clock, and you’ll get a straight answer about what’s going on and what it will cost before anyone drives out. No trip charge inside the county. $40 off any repair over $200. A permanent 10% discount for seniors and veterans. And the 90-Day Done Right Promise in writing on every job. Hal’s name is on the shop, and the shop serves Cibolo every day. You can hold us to it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.