Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Celina
Gate repair in Celina usually falls into one of two camps: a gate that’s only a few years old and already leaning, or a ranch gate that’s been swinging since before the subdivision went in. Either way, the fix starts with the post, not the panel. We’re Gatewood Fence & Gate, and Hal Gatewood has been fixing and welding gates since 2001. We answer the phone around the clock at (877) 610-2993, and we show up in Celina with the truck already stocked. If your gate is binding, sagging, or the Celina Gate Motor & Opener just quit, call us and a live person picks up. Not a voicemail.
Why Gatewood Fence & Gate Is Celina’s Preferred Gate Repair Company
Celina sits at the active frontier of DFW’s northward growth, where former ranch and farmland is rapidly converting into master-planned HOA communities. That creates an almost unique dual market: legacy agricultural swing gates and cattle-style hardware on older acreage lots exist side-by-side with brand-new automated decorative iron gates in developments like Light Farms and Mustang Lakes. No neighboring city has this same scale of simultaneous rural-to-suburban gate conversion happening right now, and it means Celina’s gate repair demand is unusually broad. One day we’re retrofitting a 30-year-old ranch gate with modern safety sensors. The next day we’re re-setting posts on a two-year-old swing gate that the black clay has already heaved out of plumb.
Hal’s name is on the shop and on every invoice. He’s been at this since 2001, and he still gets annoyed when he finds sloppy work somebody left behind. The Gate Repair crew that shows up in Celina is background-checked and uniformed, and the person who does the work is the same person who’ll come back if anything’s not right. That’s the whole point of the 90-Day Done Right Promise: one call brings him back, no runaround.
We coordinate scheduling from our Dallas-Fort Worth office, but the crews who serve Celina are local to the area and know the clay, the HOAs, and the roads. You’ll see us again at the hardware store. That’s the oldest accountability there is.
Key Takeaways
- Gate repair in Celina typically starts with the post, not the panel: heaving black clay is the root cause of most gate failures here.
- We repair on site, including welding, so the gate stays in your driveway.
- Every job carries the 90-Day Done Right Promise in writing.
- Upfront pricing: the price is quoted and agreed before any work begins. No surprises at the door.
- A live person answers at (877) 610-2993, 24 hours a day, 7 days a week.
Our Gate Repair Services in Celina
We don’t swap parts that don’t need swapping. We fix the gate in your driveway, and we start by figuring out what actually failed. Here’s what that looks like in Celina.
Electric Gate Repair
Electric gate systems in Celina’s newer subdivisions are surprisingly young, but the freshly graded, recently disturbed clay lots beneath them haven’t fully settled. That means the control board and motor often get blamed for a problem that actually starts in the ground. If the gate reverses or stops mid-cycle, the first thing we check is whether the post has moved and thrown the operator out of alignment. Then we check the board. A typical electric gate repair in Celina runs $180-$420 depending on whether it’s a sensor fault, a limit switch, or a post that needs re-setting first.
Automatic Gate Repair
Automatic gates in Celina’s master-planned communities are under constant stress from Collin County’s expansive black clay. Dry summers pull moisture from the ground and wet springs saturate it, causing gate posts to heave and lean on an annual cycle. When an automatic gate starts dragging or the arm binds, it’s rarely the motor. It’s the post. We service the motor, the arm, the photo-eye, and the underlying structure, because fixing the panel without the post means you’ll fix it twice. Automatic gate repair in Celina usually runs $200-$500, with more involved jobs like replacing a rack and pinion going higher.
Hinge & Post Repair
This is the work we do most in Celina, and there’s a reason. Hinge posts lean within two to four years of installation because the black clay on freshly graded lots swells and shrinks with every season. Our crew recently re-set a leaning hinge post on a 2019 LiftMaster swing gate in Mustang Lakes. The post footing had heaved from black clay expansion, throwing off the rack and pinion and triggering the safety photocell fault. We re-poured the footing, realigned the operator, and reinstalled the photo-eye at the proper height. The gate now cycles clean without binding. Hinge and post repair in Celina typically runs $250-$650 depending on whether we’re re-setting one post, both, or pouring a new footing.
Gate Realignment
A gate sags in the hinge post, not in the middle, and that is where we start. On Celina’s newer lots, a gate that’s only two or three years old will often bind or drag because one post has settled faster than the other. We realign by correcting the post, not by tweaking the hinges to compensate, because a compensated hinge is a temporary fix on clay that’s still moving. Gate realignment in Celina runs $150-$350 for most single swing gates, more if the post has pulled far enough to need a footing repair.
We also handle lock repair and our Gate Parts & Welding in Celina on older ranch gates. Those are coming up next, because they’re a big part of what makes this market different.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Celina
We’re certified to service nine major gate brands, and most of what we see in Celina is LiftMaster on the newer automated gates and older Linear, Viking, or DoorKing operators on converted ranch properties. We keep common parts on the truck for LiftMaster, Viking, and DoorKing systems so we can often finish a Celina repair the same day we show up. For older boards that aren’t made anymore, Hal will tell you straight whether it’s worth retrofitting or whether replacement is the cheaper answer over the next three years.
Common Gate Repair Problems We See in Celina Homes
If there’s one thing that separates Celina from Frisco or McKinney, it’s the soil. Frisco’s older, more stabilized lots don’t move the way freshly graded Celina clay does. A fix that works there won’t hold up here if it ignores what’s happening underground. Here’s what we see most often in Celina.
- Lean within two to four years of installation. Swelling and shrinking black clay on freshly graded lots pushes gate posts out of plumb fast, causing latches to miss and automation arms to bind. The gate wasn’t built badly. The ground under it is still settling.
- Legacy ranch gates that fail modern safety standards. Converted acreage properties often still have non-UL 325-compliant operators, missing keypad entry, or no loop detectors. They fail safety inspections or become genuinely dangerous to operate, especially around kids or livestock.
- Weld and rust failures on older agricultural swing gates. Owners upgrade to heavier decorative iron panels without reinforcing the original post structure. The old cattle-style hardware wasn’t built for the extra weight, and the welds start to crack at the hinge points.
- Photocell faults caused by post movement. When a post heaves, it changes the height and angle of the safety photo-eye. The gate reverses or stops mid-cycle even though the sensor itself is fine. Re-leveling the post usually fixes it without replacing the board.
Pricing for Gate Repair in Celina, TX
Here’s what Celina homeowners can expect to pay for common gate repairs, based on what we’ve actually charged in this market:
- Gate realignment: $150-$350
- Electric gate repair (sensor, limit switch, minor board diagnostics): $180-$420
- Hinge and post repair (re-set, re-pour footing): $250-$650
- Automatic gate repair (arm, operator, photo-eye): $200-$500
- Weld and rust repair: $120-$400 depending on panel size and rust depth
- Full operator retrofit on legacy ranch gate: $800-$1,800 depending on access control
The price is quoted and agreed before any work starts. That’s not a courtesy; it’s how we’ve done business since 2001. We don’t show up with one number and leave with another. Estimatings are free, we don’t charge a trip fee inside the county, and if you’ve got a written estimate from another company, Hal will give you a free second opinion. Seniors and veterans get a permanent 10% discount, and there’s $40 off any repair over $200. Call (877) 610-2993 and you’ll get a number you can plan around.
We Also Serve Cities Near Celina
Our crews work throughout northern Collin County and the surrounding area, so if you’re in Prosper, Frisco, Melissa, or Fairview, the same owner-operated service applies. The clay moves differently in each of those towns, but the principle doesn’t change: fix the post, stand behind the work, and answer the phone when it rings. Gate Repair is what we do, and we do it within driving distance of everyone in Celina’s orbit.
Serving Celina, TX - Our Local Coverage Area
We’re based in the Celina area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Celina
Because the ground under it hasn’t finished settling. Celina’s master-planned communities like Light Farms and Mustang Lakes are built on freshly graded clay that was disturbed during construction. That clay swells when wet and shrinks when dry, and it does it unevenly for years. A gate installed two to four years ago can lean or bind even when the workmanship was good, simply because one post’s footing is moving more than the other. The fix is re-setting and re-pouring the footing, not adjusting the hinges to compensate. Call (877) 610-2993 and we’ll assess the post movement and give you a written quote.
In most cases, yes, you can retrofit. Older ranch gates on Celina’s converted acreage often have non-UL 325-compliant operators without photo-eyes or keypad entry. We can add safety sensors, keypads, loop detectors, and modern control boards to a solid existing gate structure. Replacement only makes sense when the posts are too far gone or the panel itself is rusted through. Hal will tell you straight which one you’re looking at. Estimates are free; call (877) 610-2993 to schedule a look.
Most likely, a post has heaved from black clay expansion and thrown the photo-eye or the arm out of alignment. The board often gets blamed, but the sensor or the alignment is usually the real problem. We check the post first, then the photo-eye height and angle, then the board. That sequence saves you from paying for a board replacement you didn’t need. Call (877) 610-2993 and we’ll diagnose it properly.
Celina HOAs often mandate particular finishes on decorative iron and aluminum gates to keep the streetscape uniform. We can repair and match rust spots without repainting the entire gate, though the match depends on the existing finish and how much sun fading has occurred. For rust repair, we grind, treat, and re-coat the affected area, then blend the finish. If a full repaint is the only way to get a clean match, we’ll tell you that upfront before you spend a dollar. Call (877) 610-2993 for an assessment.
On older, stabilized lots, a properly set post can last 15 years or more. On Celina’s freshly graded clay, a post that wasn’t set deep enough can start moving within two to four years, especially on newer lots in developments like Light Farms. The key variables are footing depth, drainage around the post, and whether the clay was properly compacted when the post went in. We set posts below the active clay zone when possible to give you as close to a permanent fix as this soil allows. Call (877) 610-2993 and we’ll check your post depth and footing condition.
Call Gatewood Fence & Gate for Gate Repair in Celina
If your gate is leaning, binding, rusting, or the opener’s acting up, call (877) 610-2993. Hal Gatewood has been fixing gates since 2001, and he’ll give you a straight answer and a written price before anything gets started. The name is on the shop, and the shop is down the road. That’s the oldest guarantee there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Celina and the surrounding area since 2001.