Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Celina
Gate parts and welding in Celina usually means one of two situations: a brand-new automated gate in a master-planned community that’s already binding, or an older ranch-style gate on an acreage lot that’s finally given out. Either way, the fix almost always comes down to the hinge post, the weld, or both. We’re Gatewood Fence & Gate, and Hal Gatewood has been repairing gates since 2001. If you’re in Celina and your gate won’t close, sags at the latch, or the HOA sent you a notice about the finish, call (877) 610-2993 and a live person answers. Not a voicemail, not a call center. You’ll get straight answers and a written price before any work starts.
Here’s the thing about Celina that most gate companies from outside the area miss: the black clay under your lot is still moving. That changes how we diagnose gate problems and what we recommend. A gate that looks broken at the panel is usually failing at the post. Fix the panel without the post and you’ll fix it twice. We start where the problem actually lives.
Why Gatewood Fence & Gate Is Celina’s Preferred Gate Parts & Welding Company
There’s no mystery to why Celina homeowners call us. Hal Gatewood’s name is on the shop, his address is published, and he’s been at this since 2001. He’s not a franchise that rotated through three managers last year. When you call about a sagging gate in Light Farms or a busted hinge on a ranch gate off FM 455, you’re talking to someone who will drive to your driveway and fix it himself or send a crew he’s trained and stands behind. That’s the whole model.
We also hear from Celina customers who already paid another company to fix the same gate six or eight months ago. The post wasn’t reset, the weld was ground smooth but had no penetration, or the latch was adjusted without checking why it moved in the first place. That’s sloppy work, and it’s the kind of thing that genuinely irritates us. The 90-Day Done Right Promise isn’t a marketing line. It’s stamped in writing on every job. If it’s not done right, we make it right. One call brings us back, no runaround.
Response time to Celina from our Dallas-Fort Worth metro office is typically same-day or next-day depending on the issue. We carry a rolling stock of common parts for the brands Celina HOAs specify, so we’re not always waiting on a distributor in Ohio to ship a hinge bracket. And every call is answered by a live person, 24/7. You won’t sit through a phone tree. You’ll talk to someone who knows what a cantilever slide gate is.
Our Gate Parts & Welding Services in Celina
We focus on the sub-services that actually solve gate failures in Celina, not the ones that look good on a brochure. Here’s what that means in practice.
Post Replacement
In Celina, post replacement is the most common repair we do, and it’s the one people least expect. The expansive black clay in Collin County swells when it’s wet and shrinks when it’s dry. A post set in a freshly graded lot, even one poured to code, will heave and lean as the soil settles over the first two to four years. In Light Farms and Mustang Lakes, we regularly reset posts that are barely out of warranty. The fix means pulling the post, digging a deeper footing, compacting road base, and setting the post so it can’t move with the clay. Then we rehang the gate and realign everything. If you catch the lean early, you save the gate. If you wait, the panel twists and you’re into rail repair too.
Hinge Replacement
Hinge replacement in Celina runs from worn weld-on barrel hinges on older ranch gates to adjustable aluminum hinges on decorative HOA iron gates. When a post leans even half an inch, the hinge takes all the abuse. We see hinges that have been greased repeatedly by homeowners trying to quiet a squeal, but the real problem is a quarter-inch of post movement. We replace the hinge, but only after we check the post. If the post is sound, a new hinge restores smooth swing. If it isn’t, a new hinge on a moving post is money wasted. We’ll tell you which situation you have before we touch anything.
Rail Repair
Rail repair matters most on slide gates and longer swing gates around Celina, especially the decorative iron gates HOAs love. When post movement torques the gate frame, the field welds where rails meet pickets start to crack. You’ll see rust streaks at the joints, or the gate will look like it’s smiling when it sags. We re-weld rails on site, which means your gate stays in your driveway. We don’t haul it to a shop, and we don’t tell you to replace a gate that has ten years of life left in it. On-site welding is the difference between a repair that costs a few hundred dollars and a replacement that costs a few thousand.
Custom Welding
Sometimes the part you need doesn’t exist. An older ranch gate off Celina’s county roads might have a hinge bracket sized for cattle hardware, not residential automation. An HOA gate might need a custom strike plate to meet a new latch spec. We weld on site, which means we fabricate brackets, reinforce sagging corners, extend posts, and build what the gate actually needs. Hal has been welding since before half the master-planned subdivisions around Celina existed. If it’s steel or iron and it’s on your fence or gate, we can fix it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Celina
Most automated gates in Celina’s newer communities run on LiftMaster, DoorKing, Elite, or Viking operators. We’re certified to service all of them, along with FAAC, BFT, Linear, Ghost Controls, and Mighty Mule. What that means for you is simple: when we diagnose a gate problem, we’re not guessing at the operator. We know what the board is telling us, we know what the safety photocell fault codes mean, and we know which parts are worth replacing versus which operator has simply lived past its usefulness. We stock common boards, remotes, and edge sensors for the brands Celina HOAs specify, so turnaround is usually measured in days, not weeks.
If you need Gate Parts & Welding done right the first time, call us before you call a handyman. We have seen too many handyman welds on Celina gates. Grinding a bead smooth doesn’t make it strong.
Common Gate Parts & Welding Problems We See in Celina Homes
- Post lean in new HOA subdivisions. The black clay under Celina’s master-planned communities is still settling, and we see two-to-four-year-old gates in Light Farms and Mustang Lakes with posts leaning enough to throw off the latch. The gate looks broken at the latch, but the post is the problem.
- Rural acreage gates with agricultural hardware. Older swing gates around Celina’s unincorporated edges were built for occasional use, not six cars a day. The hinge posts fatigue under daily loads, and the welds at the hinge brackets crack. We replace the post and rebuild the hinge mount for residential use.
- Shared entry gates faulting on loop detectors. When a gate panel sags or the rack and pinion misaligns, the loop detector or safety photocell faults and the gate refuses to cycle. Residents can’t get in. We realign the panel, reset the post if needed, and clear the fault for good.
- Rail separation at field welds on HOA iron gates. Slide gates that torque under post movement crack their field welds first. The gate still slides, but it grinds and binds. We re-weld the rail, reinforce the corner, and realign the operator so it stops fighting itself.
Pricing for Gate Parts & Welding in Celina, TX
Here are honest ranges for Celina, based on what we actually see. Hinge replacement typically runs $180 to $340, depending on whether we’re replacing one barrel hinge or a full set of adjustable hinges on an HOA gate. Post replacement in Celina usually falls between $400 and $850 per post when you factor in the deeper footing the clay demands. Rail repair and custom welding run $250 to $600, depending on how much weld and reinforcement the frame needs. These are the prices we quote, and they’re the prices you pay.
What changes the cost is footing depth, gate weight, access to the post, and whether the HOA requires a specific finish or hardware match. We quote the job before we start, in writing, and the price doesn’t move at the door. You also get $40 off any repair over $200, and there’s no trip charge inside the county. If you’re a senior or a veteran, take 10% off, permanently. Call (877) 610-2993 and we’ll walk through your gate over the phone before we even schedule.
We Also Serve Cities Near Celina
We work all around the Celina area, including Prosper, Frisco, Melissa, and Fairview. If you’re on the edge of Celina or just down the road, the same crew and the same pricing apply. Gate Parts & Welding in Celina is our home base for this corner of Collin County, but we don’t disappear at the city line.
Serving Celina, TX - Our Local Coverage Area
We’re based in the Celina area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Celina
Yes, we do. We’ve worked with the management companies and architectural review boards in Celina’s master-planned communities, and we know what they’ll approve: finish, height, hardware style, and operator placement. Before you submit a modification request, we can spec the work in the language the HOA wants to see. We’ll tell you if the repair keeps you inside your existing approval or if you need to file first. The last thing you want is a completed repair that violates a covenant. Call (877) 610-2993 and we’ll talk through what your HOA will ask for.
In almost every case we see, the problem is the black clay under the post. Celina’s master-planned lots are freshly graded, and the expansive clay shrinks and swells dramatically through the seasons. A post set two years ago in Light Farms can lean enough during a dry summer to bind the latch or drag the panel. It’s not a defect in the gate. It’s soil movement. The fix is to reset the post in a deeper footing with compacted road base, then realign the operator. That’s a permanent repair, not an adjustment that lasts six months.
You can weld a hinge back onto a leaning post, and sometimes that’s the right call. If a weld cracked cleanly and the post is still solid and plumb, we’ll weld it back on site and you’re done in an hour. But if the post itself is leaning, welding a hinge to it just transfers the problem. The gate will bind again. In that case the post needs to be reset or replaced. We’ll tell you straight which one you’ve got, and we won’t sell you a post replacement you don’t need.
Yes. We service shared entry gates in Celina, including communities with management companies and access control systems tied to loop detectors, keypads, and phone entry. A sagging panel or misaligned rack and pinion will trigger false loop faults and lock residents out. We diagnose the mechanical cause first, then clear the control board. We coordinate with the property manager and provide written documentation for the HOA’s records. Call (877) 610-2993 with the gate’s brand and model, and we’ll get someone out.
We service the agricultural-grade hardware that Celina’s older acreage properties were built with: weld-on barrel hinges, cattle-style latch pins, chain-link gate frames, and post-and-rail setups that have been on the property for decades. These gates fail at the hinge posts first because the loads have increased as former ranch land has become residential. We replace the posts, weld new hinge brackets sized for the gate’s actual weight, and if you’re adding automation, we’ll bring the hardware up to a spec the operator can handle.
If your gate is binding, sagging, or the HOA is on your back, call (877) 610-2993. We’ll give you a straight diagnosis over the phone, a written quote before any work starts, and a 90-Day Done Right Promise on every job. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Celina and the surrounding communities.