Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Carrollton
Gate repair in Carrollton usually costs between $185 and $2,400 depending on whether we’re realigning a hinge, replacing a control board, or resetting a post that decades of Blackland Prairie clay have pulled out of plumb. Most hinge realignments and latch fixes run $185-$400, while a post reset with new concrete footing runs $900-$1,500. We answer the phone around the clock at (877) 610-2993, and Hal Gatewood’s name is on every invoice. If your gate sags, drags, or won’t latch, we’ll send someone who can look at the post, not just the hinge, and tell you the truth before any work is quoted.
We know Carrollton’s gate problems because they follow a pattern nobody in a call center would recognize. The city’s original 1980s subdivisions, especially the southern 75006 ZIP, were built with cedar posts set in minimal concrete on expansive clay soil. When that clay swells in March and contracts in August, the posts migrate. A gate that latched cleanly at Thanksgiving binds by spring. That’s not a hinge problem. That’s a footing problem. And that’s where we start.
Our Gate Repair crew covers all of Carrollton: 75006, 75007, 75010, and 75011. Scheduling and dispatch run through our Dallas-Fort Worth office, but the person who shows up lives and works in the north Texas area and has seen your exact gate a hundred times.
Why Gatewood Fence & Gate Is Carrollton’s Preferred Gate Repair Company
Hal Gatewood started this company in 2001 and never turned it into a franchise. The address is published, the license number is public, and if a gate doesn’t hold up, the 90-Day Done Right Promise is in writing on the work order, not buried in a terms page. One call brings him back. No runaround.
Carrollton homeowners tell us something similar every week: they called a big company, got a price on the phone, and then watched that price climb once the truck pulled up. We quote the number before any work starts and that’s the number. There’s no trip charge inside the county. There’s a $40 discount on any repair over $200, and a permanent 10% discount for seniors and veterans. You don’t have to negotiate for it. It’s already on the sheet.
When you call (877) 610-2993, a live person answers. Not a voicemail. Not a menu tree. Around the clock, every day. Hal has been fixing gates since 2001 and gets genuinely irritated when he finds work somebody else left sloppy. That irritation is your guarantee.
Our Gate Repair Services in Carrollton
Hinge & Post Repair
In Carrollton’s older subdivisions, the hinge post is almost always the problem. Cedar posts set in the 1980s with minimal concrete have spent 30 years riding the shrink-swell cycle of Blackland Prairie clay. We see posts rotated two to four inches out of plumb, which throws the entire gate out of square. You can replace the hinge, but if the post is moving, the gate will sag again within a year. We reset the post, dig a proper footing with 24 inches of concrete below grade, and then hang the new hinge. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
A gate that drags on the ground or won’t catch the latch in March was probably fine in August. That seasonal shift is the clay moving under your posts. Realignment in Carrollton usually runs $185 to $300 when the posts are still sound and the hinges just need adjustment. But if the post itself has rotated, a realignment alone will only buy you a few months. We’ll tell you which one you’re looking at before we touch a tool.
Electric Gate Repair
Automatic gate operators in Carrollton fail in predictable ways. The 1980s-era control boards on older DoorKing and Linear systems dry out their capacitors in the attic heat of a Texas summer. The motors still work fine, but the board stops telling them what to do. We service FAAC, BFT, Linear, and Viking systems, among seven other major brands, and we keep common parts stocked so we’re not ordering from a warehouse while your gate sits open. On-site welding means we fix the operator brackets on the spot instead of hauling the gate to a shop.
Weld & Rust Repair
Ornamental iron gates in Carrollton take a beating from July heat and the occasional February ice storm. Welds crack when the metal contracts, and once water gets inside the joint, rust follows. We weld on site, in your driveway, and we don’t just patch the visible crack. We grind back to clean metal and reinforce the joint so the next freeze doesn’t split it again. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Carrollton
We service nine major gate brands, including FAAC, BFT, Linear, and Viking. We stock common control boards, safety edges, remotes, and hinge hardware for these systems so Carrollton customers aren’t waiting on a freight truck. If you’ve got an older operator with a board that’s no longer made, we can often retrofit a modern board into the existing housing rather than replacing the whole operator. We’ll tell you honestly when retrofit makes sense and when replacement is cheaper than throwing parts at a 35-year-old system.
Common Gate Repair Problems We See in Carrollton Homes
- Clay-driven post rotation. Carrollton sits squarely on the Blackland Prairie’s shrink-swell clay. Winter and spring rains push posts up and out; summer drought pulls them back down at a slightly different angle. Over 25 to 35 years, a post drifts 2-4 inches out of plumb and the gate binds or gaps.
- Failed 1980s control boards. Automatic gates installed during Carrollton’s buildout boom used control boards with capacitors that bake in attic heat. When the board fails, the operator may hum, click, or do nothing at all. The motor is usually fine; the brain is dead.
- Ice storm damage from February 2021. That storm snapped cedar boards along top rails and cracked ornamental iron welds across Carrollton. Gates that survived the freeze sometimes droop on one side, which then wears out the hinge on the other side within a year.
- Rust at weld joints on iron gates. North Texas humidity settles into cracks in painted welds. Once rust starts inside the joint, paint won’t stop it. The weld needs to be ground out, cleaned, and re-welded. We do that on site.
Pricing for Gate Repair in Carrollton, TX
Here’s what Carrollton homeowners can expect to pay in this market:
| Repair Type | Typical Range |
|---|---|
| Hinge adjustment or realignment | $185 - $300 |
| Latch replacement | $120 - $260 |
| Hinge replacement (per hinge) | $150 - $350 |
| Post reset with concrete footing | $900 - $1,500 |
| Control board replacement or retrofit | $350 - $900 |
| Weld repair (ornamental iron) | $200 - $600 |
| Full gate replacement (wood or iron) | $1,200 - $4,000+ |
The biggest variable in Carrollton is whether the post is still sound. A cheap realignment runs under $300. A post reset runs four or five times that because we’re digging out the old footing, setting fresh concrete 24 inches down, and letting it cure before re-hanging the gate. We’ll tell you exactly which job you need, and we quote the price before any work starts. Estimates are free. Call (877) 610-2993 and we’ll come look.
We Also Serve Cities Near Carrollton
Our Gate Repair in Carrollton coverage extends to the neighboring communities of Addison, Farmers Branch, Coppell, and The Colony. If you’re in any of those towns, call (877) 610-2993 and we’ll send someone the same way we do here: with a live voice on the phone and a written promise on the work order.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Carrollton
Because the Blackland Prairie clay under your posts expands when it rains. Spring moisture pushes posts up and outward just enough to throw the gate out of square, so the latch catches on one side and gaps on the other. If the post has moved more than an inch or two, realignment alone won’t hold. Call (877) 610-2993 and we’ll tell you whether you need a $200 adjustment or a $1,200 post reset before we touch anything.
In most Carrollton cases, yes, it can be retrofitted. The gate panel itself is often still sound; the hardware and footing are the weak points. We can install a modern operator from Linear, Viking, FAAC, or LiftMaster, add safety edges, and reinforce the hinge post. If the post is badly rotated, we reset it first. A full replacement only makes sense when the cedar boards are rotted through or the steel is compromised beyond weld repair.
Yes, and nearly every time in Carrollton’s 1980s subdivisions that’s exactly what it is. The original cedar posts were set with minimal concrete on shrink-swell clay, so the post rotates below grade without showing obvious damage above. A gate sags in the hinge post, not in the middle. We’ll check the plumb line and show you what’s moving before we quote the fix.
Give it the 2×4 test: place a 2×4 in the gate’s path and close it. A properly working safety edge or photo eye should stop and reverse the gate before the board splinters. If it doesn’t, the gate is a crush hazard. Also check that the gate doesn’t drift closed on its own; a creeping gate is the first sign of a failing board or slipping limit switch. We can test the safety edges, inspect the wiring, and replace boards from FAAC, BFT, and Linear systems. Call (877) 610-2993 to schedule a safety inspection.
Repair is usually the cheaper answer and often the stronger one. We can weld the hinge on site, reinforcing the joint so it holds through the next freeze, then reset the post in proper concrete. That typically runs $600 to $1,800 total. Replacement only makes sense when the gate panel itself is rusted through in multiple places or the design can’t be reinforced without visible patches. We’ll give you both numbers and let you decide. Estimates are free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Carrollton since 2001.